Research Papers

Effects of Different Cavity Geometries on Machining Performance in Micro-Electrical Discharge Milling

[+] Author and Article Information
Shrikant Vidya, Alok Kr. Das

Department of Mechanical Engineering,
Indian School of Mines,
Dhanbad 826004, India

Vijay, Aneissha Chebolu, Nagahanumaiah

Micro Systems Technology Laboratory,
CSIR-Central Mechanical Engineering
Research Institute,
Durgapur 713209, India

Swapan Barman

Precision Engineering and Metrology Group,
CSIR-Central Mechanical Engineering
Research Institute,
Durgapur 713209, India

1Corresponding author.

Contributed by the Manufacturing Engineering Division of ASME for publication in the JOURNAL OF MICRO- AND NANO-MANUFACTURING. Manuscript received July 3, 2014; final manuscript received November 27, 2014; published online January 13, 2015. Assoc. Editor: Stefan Dimov.

J. Micro Nano-Manuf 3(1), 011007 (Mar 01, 2015) (10 pages) Paper No: JMNM-14-1041; doi: 10.1115/1.4029275 History: Received July 03, 2014; Revised November 27, 2014; Online January 13, 2015

Low energy-short pulsed electric discharge coupled with precise movement of circular electrode in micro-electrical discharge-milling (μ-EDM-milling) enables generation of three-dimensional (3D) cavities in the order of few tens of microns. Use of unshaped rotating electrode alters the spark discharge pattern that is primarily driven by the shape and size of the cavities being machined. In this paper, effects of five different cavities: circular, triangular, square, channel, and cross channel (square pillars) on the machining performance have been studied. These cavities having a nominal dimension of 1000 μm were machined on steel sample using 200 μm tungsten carbide electrode. The machining performance has been evaluated by analyzing dimensional accuracy, surface integrity, profile error, and formation of recast layers. The results highlight significant shape effect on machining performance in μ-EDM-milling. Circular holes machined by die sinking (tool advancement in Z-axis) are found to be more accurate, and square shaped pillars machined in two settings by generating cross channels at 90 deg have poor dimensional control. On the other hand, triangular cavities have the highest surface finish and profile uniformity compared to other shapes. The microscopic study in scanning electron microscopy (SEM) reveals significant variations in globule formation, recast layer deposition, flow of eroded molten metal, and final shape of cavities, which are found to be dependent of tool rotation.

Copyright © 2015 by ASME
Your Session has timed out. Please sign back in to continue.


Moylan, S. P., Chandrasekar, S., and Benavides, G. L., 2005, “High-Speed Micro-Electro-Discharge Machining,” Sandia National Laboratories, Sandia Report No. SAND-2005-5023.
Liu, H. S., Yan, B. H., Huang, F. Y., and Qiu, K. H., 2005, “A Study on the Characterization of High Nickel Alloy Micro-Holes Using Micro-EDM and Their Applications,” J. Mater. Process. Technol., 169(3), pp. 418–426. [CrossRef]
Pham, D. T., Ivanov, A., Bigot, S., Popov, K., and Dimov, S., 2007, “An Investigation of Tube and Rod Electrode Wear in Micro EDM Drilling,” Int. J. Adv. Manuf. Technol., 33(1–2), pp. 103–109. [CrossRef]
Sundaram, M. M., Pavalarajan, G. B., and Rajurkar, K. P., 2008, “A Study on Process Parameters of Ultrasonic Assisted Micro-EDM Based on Taguchi Method,” J. Mater. Eng. Perform., 17(2), pp. 210–215. [CrossRef]
Uhlmann, E., and Roehner, M., 2008, “Investigations on Reduction of Tool Electrode Wear in Micro-EDM Using Novel Electrode Materials,” CIRP Ann.: J. Manuf. Sci. Technol., 1(2), pp. 92–96. [CrossRef]
Paul, G., Roy, S., Sarkar, S., Nagahanumaiah, and Mitra, S., 2013, “Investigations on Influence of Process Variables on Crater Dimensions in Micro-EDM of γ-Titanium Aluminide Alloy in Dry and Oil Dielectric Media,” Int. J. Adv. Manuf. Technol., 65(5–8), pp. 1009–1017. [CrossRef]
Jahan, M. P., Wong, Y. S., and Rahman, M., 2009, “A Study on the Fine-Finish Die-Sinking Micro-EDM of Tungsten Carbide Using Different Electrode Material,” J. Mater. Process. Technol., 209(8), pp. 3956–3967. [CrossRef]
Nagahanumaiah, Janakarajan, R., Glumak, N., Kapoor, S. G., and DeVor, R. E., 2009, “Characterization of Plasma in Micro-EDM Discharge Using Optical Spectroscopy,” J. Manuf. Processes, 11(2), pp. 82–87. [CrossRef]
Kunleda, M., Mlyoshi, Y., and Takaya, T., 2003, “High Speed 3D Milling by Dry EDM,” CIRP Ann., 52(1), pp. 147–150. [CrossRef]
Bayramoglu, M., and Duffill, A. W., 1994, “Systematic Investigation on the Use of Cylindrical Tools for the Production of 3D Complex Shapes on CNC EDM Machine,” Int. J. Mach. Tools Manuf., 34(3), pp. 327–339. [CrossRef]
Tao, J., Shih, A. J., and Ni, J., 2008, “Experimental Study of the Dry and Near-Dry Electrical Discharge Milling Processes,” ASME J. Manuf. Sci. Eng., 130(1), p. 011002 [CrossRef]
Mikesic, I. J., Fleisig, R. V., and Koshy, P., 2009, “Electrical Discharge Milling With Oblong Tools,” Int. J. Mach. Tools Manuf., 49(2), pp. 149–155. [CrossRef]
Bissacco, G., Tristo, G., and Valentinčič, J., 2010, “Assessment of Electrode Wear Measurement in Micro-EDM-Milling,” Proceedings of the 7th International Conference on Multi-Material Micro Manufacture (4M-2010), B.Fillon, C.Khan-Malek, and S.Dimov, eds., Bourgen Bresse and Oyonnax, France, pp. 155–158.
Karthikeyan, G., Garg, A. K., Ramkumar, J., and Dhamodaran, S., 2012, “A Microscopic Investigation of Machining Behaviour in μ-ED-Milling Process,” J. Manuf. Processes, 14(3), pp. 297–306. [CrossRef]
Nguyen, M. D., Wong, Y. S., and Rahman, M., 2013, “Profile Error Compensation in High Precision 3D Micro-EDM Milling,” Precis. Eng., 37(2), pp. 399–407. [CrossRef]
Yu, H. L., Luan, J. J., Li, J. Z., Zhang, Y. S., Yu, Z. Y., and Guo, D. M., 2010, “A New Electrode Wear Compensation Method for Improving Performance in 3D Micro EDM Milling,” J. Micromech. Microeng., 20(5), p. 055011. [CrossRef]
Yan, M. T., Huang, K. Y., and Lo, C. Y., 2009, “A Study of Electrode Wear Sensing and Compensation in Micro-EDM Using Machine Vision System,” Int. J. Adv. Manuf. Technol., 42(11–12), pp. 1065–1073. [CrossRef]
Lee, S. H., and Li, X. P., 2001, “Study of the Effect of Machining Parameters on the Machining Characteristics in EDM of WC,” J. Mater. Process. Technol., 115(3), pp. 344–355. [CrossRef]
Mikrotools Pvt. Ltd., 2006, Programming Manual of Integrated Multi-Process Machine Tool (Model DT-110), Mikrotools Pvt. Ltd., Singapore, Ver. 1.
Khanra, A. K., Pathak, L. C., and Godkindi, M. M., 2007, “Microanalysis of Debris Formed During Electrical Discharge Machining (EDM),” J. Mater. Sci., 42(3), pp. 872–877. [CrossRef]
Roy, S., Nagahanumaiah, Roy, H., and Ghosh, D., 2009, “Characterization of Debris Produced in Micro-EDM,” 4M/ICOMM 2009–The Global Conference on Micro Manufacture, V.Saile, K.Ehmann, and S.Dimov, eds., Forschungszentrum Karlsruhe, Germany, pp. 249–252.
Yang, X., Guo, J., Chen, X., and Kunieda, M., 2011, “Molecular Dynamics Simulation of the Material Removal Mechanism in Micro-EDM,” Precis. Eng., 35(1), pp. 51–57. [CrossRef]
Straplets, J. L., and Dimievi, W. L., 2007, “Textured Surface for Test Sample Card and Mold for Manufacturing the Same,” European Patent No. EP1867393 A2.


Grahic Jump Location
Fig. 1

μ-EDM-milling experimental setup (DT-110) with typical discharge image: (a) Machining setup and (b) typical discharge image by high-speed camera

Grahic Jump Location
Fig. 2

Microscale cavities machined on EN-24 sample by μ-EDM-milling

Grahic Jump Location
Fig. 3

Discharge patterns and shape errors in μ-EDM-milling operation

Grahic Jump Location
Fig. 4

Microscopic images (5×) of cavities highlighted with key geometric error: (a) circular (high overcut), (b) triangular (rounding of corner), (c) square (rounding of corner), (d) channel (rough surface), and (e) square pillar (high recast edge)

Grahic Jump Location
Fig. 5

SEM micrographs of cavity showing recast layer with microcracks: (a) circular, (b) triangular, (c) square, (d) channel, and (e) square pillar

Grahic Jump Location
Fig. 6

Effect of tool electrode rotation on melt flow and granules formation: (a) spheroidization effect, (b) circular, (c) triangular, (d) square, (e) channel, and (f) square pillar

Grahic Jump Location
Fig. 7

Surface profilometry of the cavity surface: (a) triangular, (b) square, (c) channel, (d), square pillar (cross channel first), and (e) square pillar (cross channel second)



Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In