Research Papers

Fast Generation of Planar Microstructured Surfaces by Elliptical Vibration Texturing

[+] Author and Article Information
Yang Yang

Department of Mechanical and Automation Engineering,
The Chinese University of Hong Kong,
Hong Kong, China

Ping Guo

Department of Mechanical and Automation Engineering,
The Chinese University of Hong Kong,
Hong Kong, China
e-mail: pguo@mae.cuhk.edu.hk

1Corresponding author.

Contributed by the Manufacturing Engineering Division of ASME for publication in the JOURNAL OF MICRO- AND NANO-MANUFACTURING. Manuscript received September 16, 2016; final manuscript received November 25, 2016; published online January 6, 2017. Editor: Jian Cao.

J. Micro Nano-Manuf 5(1), 011004 (Jan 06, 2017) (7 pages) Paper No: JMNM-16-1048; doi: 10.1115/1.4035390 History: Received September 16, 2016; Revised November 25, 2016

Microstructured surfaces have extensive applications in a wide array of fields due to their improved functional performance. Existing manufacturing methods for these surfaces fall short of efficiency for volume production or are only applicable to a specific class of materials. In this paper, an innovative and highly efficient machining method, elliptical vibration texturing (EVT), is proposed for rapid generation of microdimples on planar engineered surfaces. The cutting tool of the EVT process vibrates along an elliptical trajectory. The elliptical vibrations, when coupled with a high cutting velocity, impose microdimples onto workpiece surfaces while machining. The high productivity is achieved by adopting a newly designed tertiary motion generator, which is able to deliver required elliptical vibrations at an ultrasonic frequency. The shape and distribution of the generated dimple patterns have been theoretically analyzed and predicted by a proposed simulation model. Preliminary texturing results using aluminum and brass as workpieces are given to validate the process principle and simulation model.

Copyright © 2017 by ASME
Your Session has timed out. Please sign back in to continue.


Bruzzone, A. , Costa, H. , Lonardo, P. , and Lucca, D. , 2008, “ Advances in Engineered Surfaces for Functional Performance,” CIRP Ann. Manuf. Technol., 57(2), pp. 750–769. [CrossRef]
Aggarwal, J. , Kotlicki, A. , Mossman, M. , and Whitehead, L. , 2006, “ Liquid Transport Based on Electrostatic Deformation of Fluid Interfaces,” J. Appl. Phys., 99(10), p. 104904. [CrossRef]
Karlsson, M. , and Nikolajeff, F. , 2003, “ Diamond Micro-Optics: Microlenses and Antireflection Structured Surfaces for the Infrared Spectral Region,” Opt. Express, 11(5), pp. 502–507. [CrossRef] [PubMed]
Moronuki, N. , and Furukawa, Y. , 2003, “ Frictional Properties of the Micro-Textured Surface of Anisotropically Etched Silicon,” CIRP Ann. Manuf. Technol., 52(1), pp. 471–474. [CrossRef]
Wakuda, M. , Yamauchi, Y. , Kanzaki, S. , and Yasuda, Y. , 2003, “ Effect of Surface Texturing on Friction Reduction Between Ceramic and Steel Materials Under Lubricated Sliding Contact,” Wear, 254(3), pp. 356–363. [CrossRef]
Bartz, M. , Terfort, A. , Knoll, W. , and Tremel, W. , 2000, “ Stamping of Monomeric SAMs as a Route to Structured Crystallization Templates: Patterned Titania Films,” Chem. Eur. J., 6(22), pp. 4149–4153. [CrossRef]
Costa, H. L. , 2005, “ Modification of Surface Topography: Manufacturing Methods and Applications,” Ph.D. thesis, University of Cambridge, Cambridge, UK.
Guo, P. , and Ehmann, K. F. , 2013, “ An Analysis of the Surface Generation Mechanics of the Elliptical Vibration Texturing Process,” Int. J. Mach. Tools Manuf., 64, pp. 85–95. [CrossRef]
Guo, P. , Lu, Y. , Pei, P. , and Ehmann, K. F. , 2014, “ Fast Generation of Micro-Channels on Cylindrical Surfaces by Elliptical Vibration Texturing,” ASME J. Manuf. Sci. Eng., 136(4), p. 041008. [CrossRef]
Herzig, H. P. , 1997, Micro-Optics: Elements, Systems and Applications, CRC Press, Boca Raton, FL.
Sun, T. , Feng, L. , Gao, X. , and Jiang, L. , 2005, “ Bioinspired Surfaces With Special Wettability,” Acc. Chem. Res., 38(8), pp. 644–652. [CrossRef] [PubMed]
Honda, H. , and Wei, J. , 2004, “ Enhanced Boiling Heat Transfer From Electronic Components by Use of Surface Microstructures,” Exp. Therm. Fluid Sci., 28(2), pp. 159–169. [CrossRef]
Moriwaki, T. , and Shamoto, E. , 1995, “ Ultrasonic Elliptical Vibration Cutting,” CIRP Ann. Manuf. Technol., 44(1), pp. 31–34. [CrossRef]
Nath, C. , Rahman, M. , and Neo, K. S. , 2011, “ Modeling of the Effect of Machining Parameters on Maximum Thickness of Cut in Ultrasonic Elliptical Vibration Cutting,” ASME J. Manuf. Sci. Eng., 133(1), p. 011007. [CrossRef]
Xu, C. , Zhu, J. , and Kapoor, S. G. , 2015, “ Force Modeling of Five-Axis Microball-End Milling,” ASME J. Micro Nano-Manuf., 3(3), p. 031007. [CrossRef]
Guo, P. , and Ehmann, K. F. , 2013, “ Development of a Tertiary Motion Generator for Elliptical Vibration Texturing,” Precis. Eng., 37(2), pp. 364–371. [CrossRef]


Grahic Jump Location
Fig. 1

Schematics of (a) the EVC process and (b) the EVT process

Grahic Jump Location
Fig. 2

Schematic diagram of the EVT process

Grahic Jump Location
Fig. 3

Geometry diagram of generated dimple arrays

Grahic Jump Location
Fig. 4

Description of the cutting tool geometry

Grahic Jump Location
Fig. 5

Tertiary motion generator and tuning experiment setup: 1—base block; 2—end masses; 3—piezoelectric rings; 4—head flexure; 5—cutting insert; and 6—capacitance displacement sensors

Grahic Jump Location
Fig. 6

Measured tool vibration trajectory: (a) displacement data and (b) two-dimensional trajectory

Grahic Jump Location
Fig. 7

Experimental setup: (1) X–Y–Z motion stage; (2) linear motor actuator; (3) acrylic adaptor; (4) workpiece; and (5) tertiary motion generator (TMG)

Grahic Jump Location
Fig. 8

Surface profile of premachined surfaces

Grahic Jump Location
Fig. 9

Textured surface profiles: (a) aluminum alloy 6061 and (b) brass C3600

Grahic Jump Location
Fig. 10

Simulated surface profiles: (a) aluminum alloy 6061 and (b) brass C3600

Grahic Jump Location
Fig. 11

Surface profiles in the cutting direction: (a) v = 1000 mm/s, ADOC = 0 and (b) v = 1500 mm/s, ADOC = 0

Grahic Jump Location
Fig. 12

Simulation results of surface profiles in the cutting direction: (a) v = 1000 mm/s, ADOC = 0 and (b) v = 1500 mm/s, ADOC = 0

Grahic Jump Location
Fig. 13

Surface profiles alone the cutting direction with v = 1000 mm/s and (a) ADOC = −1 μm and (b) ADOC = 1 μm

Grahic Jump Location
Fig. 14

Scanning electron microscope (SEM) micrograph of textured surface with v = 1500 mm/s, ADOC = −1 and cross feed = 50 μm




Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In