Balandin,
A. A.
,
Ghosh,
S.
,
Bao,
W.
,
Calizo,
I.
,
Teweldebrhan,
D.
,
Miao,
F.
, and
Lau,
C. N.
, 2008, “
Superior Thermal Conductivity of Single-Layer Graphene,” Nano Lett.,
8(3), pp. 902–907.
[CrossRef] [PubMed]
Lee,
C.
,
Wei,
X.
,
Kysar,
J. W.
, and
Hone,
J.
, 2008, “
Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene,” Science,
321(5887), pp. 385–388.
[CrossRef] [PubMed]
Neto,
A. C.
,
Guinea,
F.
,
Peres,
N.
,
Novoselov,
K. S.
, and
Geim,
A. K.
, 2009, “
The Electronic Properties of Graphene,” Rev. Mod. Phys.,
81(1), p. 109.
[CrossRef]
Novoselov,
K. S.
,
Geim,
A. K.
,
Morozov,
S.
,
Jiang,
D.
,
Zhang,
Y.
,
Dubonos,
S. A.
,
Grigorieva,
I.
, and
Firsov,
A.
, 2004, “
Electric Field Effect in Atomically Thin Carbon Films,” Science,
306(5696), pp. 666–669.
[CrossRef] [PubMed]
Geim,
A. K.
, and
Novoselov,
K. S.
, 2007, “
The Rise of Graphene,” Nat. Mater.,
6(3), pp. 183–191.
[CrossRef] [PubMed]
Cong,
H.-P.
,
Wang,
P.
, and
Yu,
S.-H.
, 2013, “
Stretchable and Self-Healing Graphene Oxide–Polymer Composite Hydrogels: A Dual-Network Design,” Chem. Mater.,
25(16), pp. 3357–3362.
[CrossRef]
Jakus,
A. E.
,
Secor,
E. B.
,
Rutz,
A. L.
,
Jordan,
S. W.
,
Hersam,
M. C.
, and
Shah,
R. N.
, 2015, “
Three-Dimensional Printing of High-Content Graphene Scaffolds for Electronic and Biomedical Applications,” ACS Nano,
9(4), pp. 4636–4648.
[CrossRef] [PubMed]
Leigh,
S. J.
,
Bradley,
R. J.
,
Purssell,
C. P.
,
Billson,
D. R.
, and
Hutchins,
D. A.
, 2012, “
A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors,” PLoS One,
7(11), p. e49365.
[CrossRef] [PubMed]
Maiti,
U. N.
,
Lim,
J.
,
Lee,
K. E.
,
Lee,
W. J.
, and
Kim,
S. O.
, 2014, “
Three-Dimensional Shape Engineered, Interfacial Gelation of Reduced Graphene Oxide for High Rate, Large Capacity Supercapacitors,” Adv. Mater.,
26(4), pp. 615–619.
[CrossRef] [PubMed]
Menzel,
R.
,
Barg,
S.
,
Miranda,
M.
,
Anthony,
D. B.
,
Bawaked,
S. M.
,
Mokhtar,
M.
,
Al-Thabaiti,
S. A.
,
Basahel,
S. N.
,
Saiz,
E.
, and
Shaffer,
M. S.
, 2015, “
Joule Heating Characteristics of Emulsion-Templated Graphene Aerogels,” Adv. Funct. Mater.,
25(1), pp. 28–35.
[CrossRef]
Wicklein,
B.
,
Kocjan,
A.
,
Salazar-Alvarez,
G.
,
Carosio,
F.
,
Camino,
G.
,
Antonietti,
M.
, and
Bergström,
L.
, 2015, “
Thermally Insulating and Fire-Retardant Lightweight Anisotropic Foams Based on Nanocellulose and Graphene Oxide,” Nat. Nanotechnol.,
10(3), pp. 277–283.
[CrossRef] [PubMed]
Xu,
X.
,
Li,
H.
,
Zhang,
Q.
,
Hu,
H.
,
Zhao,
Z.
,
Li,
J.
,
Li,
J.
,
Qiao,
Y.
, and
Gogotsi,
Y.
, 2015, “
Self-Sensing, Ultralight, and Conductive 3D Graphene/Iron Oxide Aerogel Elastomer Deformable in a Magnetic Field,” ACS Nano,
9(4), pp. 3969–3977.
[CrossRef] [PubMed]
Ye,
S.
,
Feng,
J.
, and
Wu,
P.
, 2013, “
Highly Elastic Graphene Oxide–Epoxy Composite Aerogels Via Simple Freeze-Drying and Subsequent Routine Curing,” J. Mater. Chem. A,
1(10), pp. 3495–3502.
[CrossRef]
Vickery,
J. L.
,
Patil,
A. J.
, and
Mann,
S.
, 2009, “
Fabrication of Graphene–Polymer Nanocomposites With Higher-Order Three-Dimensional Architectures,” Adv. Mater.,
21(21), pp. 2180–2184.
[CrossRef]
Estevez,
L.
,
Kelarakis,
A.
,
Gong,
Q.
,
Da'as,
E. H.
, and
Giannelis,
E. P.
, 2011, “
Multifunctional Graphene/Platinum/Nafion Hybrids Via Ice Templating,” J. Am. Chem. Soc.,
133(16), pp. 6122–6125.
[CrossRef] [PubMed]
Bourell,
D. L.
,
Leu,
M. C.
, and
Rosen,
D. W.
, 2009, “
Roadmap for Additive Manufacturing: Identifying the Future of Freeform Processing,” The University of Texas at Austin, Austin, TX, pp. 11–15.
García-Tuñon,
E.
,
Barg,
S.
,
Franco,
J.
,
Bell,
R.
,
Eslava,
S.
,
D'Elia,
E.
,
Maher,
R. C.
,
Guitian,
F.
, and
Saiz,
E.
, 2015, “
Printing in Three Dimensions With Graphene,” Adv. Mater.,
27(10), pp. 1688–1693.
[CrossRef] [PubMed]
Zhu,
C.
,
Han,
T. Y.-J.
,
Duoss,
E. B.
,
Golobic,
A. M.
,
Kuntz,
J. D.
,
Spadaccini,
C. M.
, and
Worsley,
M. A.
, 2015, “
Highly Compressible 3D Periodic Graphene Aerogel Microlattices,” Nat. Commun.,
6, p. 6962.
Barnett,
E.
,
Angeles,
J.
,
Pasini,
D.
, and
Sijpkes,
P.
, 2009, “
Robot-Assisted Rapid Prototyping for Ice Structures,” IEEE International Conference on Robotics and Automation, ICRA'09, May 12–17, pp. 146–151.
Bryant,
F. D.
, and
Leu,
M. C.
, 2009, “
Predictive Modeling and Experimental Verification of Temperature and Concentration in Rapid Freeze Prototyping With Support Material,” ASME J. Manuf. Sci. Eng.,
131(4), p. 041020.
[CrossRef]
Ossino,
A.
,
Barnett,
E.
,
Angeles,
J.
,
Pasini,
D.
, and
Sijpkes,
P.
, 2009, “
Path Planning for Robot-Assisted Rapid Prototyping of Ice Structures,” Trans. Can. Soc. Mech. Eng.,
33(4), pp. 689–700.
Zhao,
X.
,
Landers,
R. G.
, and
Leu,
M. C.
, 2010, “
Adaptive Extrusion Force Control of Freeze-Form Extrusion Fabrication Processes,” ASME J. Manuf. Sci. Eng.,
132(6), p. 064504.
[CrossRef]
Sui,
G.
, and
Leu,
M. C.
, 2003, “
Thermal Analysis of Ice Walls Built by Rapid Freeze Prototyping,” ASME J. Manuf. Sci. Eng.,
125(4), pp. 824–834.
[CrossRef]
Liu,
Q.
, and
Leu,
M. C.
, 2007, “
Finite Element Analysis of Solidification in Rapid Freeze Prototyping,” ASME J. Manuf. Sci. Eng.,
129(4), pp. 810–820.
[CrossRef]
Costa,
S.
,
Duarte,
F.
, and
Covas,
J. A.
, 2011, “
Using MATLAB to Compute Heat Transfer in Free Form Extrusion,” MATLAB—A Ubiquitous Tool for the Practical Engineer,
C. M. Ionescu
, ed., InTech, Rijeka, Croatia, p. 453.
Costa,
S.
, 2013, “
Free Form Extrusion: Extrusion of 3D Components Using Complex Polymeric Systems,” Ph.D. thesis, Universidade de Minho, Braga, Portugal.
Bellini,
A.
,
Shor,
L.
, and
Guceri,
S. I.
, 2005, “
New Developments in Fused Deposition Modeling of Ceramics,” Rapid Prototyping J.,
11(4), pp. 214–220.
[CrossRef]
Shen,
N.
, and
Chou,
K.
, 2012, “
Thermal Modeling of Electron Beam Additive Manufacturing Process: Powder Sintering Effects,” ASME Paper No. MSEC2012-7253.
Zhang,
Q.
,
Zhang,
F.
,
Medarametla,
S. P.
,
Li,
H.
,
Zhou,
C.
, and
Lin,
D.
, 2016, “
3D Printing of Graphene Aerogels,” Small,
12(13), pp. 1702–1708.
[CrossRef] [PubMed]
Moner-Girona,
M.
,
Roig,
A.
,
Molins,
E.
, and
Llibre,
J.
, 2003, “
Sol-Gel Route to Direct Formation of Silica Aerogel Microparticles Using Supercritical Solvents,” J. Sol-Gel Sci. Technol.,
26(1), pp. 645–649.
[CrossRef]
Baumann,
T. F.
,
Gash,
A. E.
,
Chinn,
S. C.
,
Sawvel,
A. M.
,
Maxwell,
R. S.
, and
Satcher,
J. H.
, 2005, “
Synthesis of High-Surface-Area Alumina Aerogels Without the Use of Alkoxide Precursors,” Chem. Mater.,
17(2), pp. 395–401.
[CrossRef]
Kakac,
S.
, and
Yener,
Y.
, 1993, Heat Conduction,
Taylor and Francis,
Washington, DC, Chap. 2.
Bergman,
T. L.
,
Incropera,
F. P.
, and
Lavine,
A. S.
, 2011, Fundamentals of Heat and Mass Transfer,
Wiley,
Danvers, MA, pp. 260–261.
