... control and its interconnection with ABAQUS framework to train a model first in a simulation environment, and thus take advantage of RL capabilities without creating waste or machine time in real-world. additive manufacturing direct energy deposition finite element analysis intelligent process...

... application. For metamaterials to be more readily created and implemented, an easily accessible design method that uses commercially available tools is needed. With the integration of optimization packages, commercially available finite element analysis software now presents an opportunity for the constrained...

... and avoid permanent damages during inevitable drops or rough handling in a clinical setup. Hence, a finite element analysis is performed for quality conservation, risk assessment, and design failure mode error analysis. This paper investigates the mechanical impacts of drop tests on a handheld portable...

... deposition remanufacturing hybrid manufacturing topology optimization finite element analysis design for additive manufacturing Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition IMECE2022 October 30-November 3, 2022, Columbus, Ohio IMECE2022-97144 ADDITIVE...

... and axial contraction of the ASFMs. soft robotics inflatable structures actuators finite element analysis fabrics computational mechanics experimental mechanics Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition IMECE2022 October 30-November 3, 2022...

.... In this study, the effect of lateral support on the buckling strength of a hollow microneedle made of chitin is analyzed numerically by using ABAQUS Finite Element Analysis software. The needle is modeled as a slender rod subjected to non-conservative (Beck) and conservative Euler loads simultaneously...

... element analysis crack phase-field Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition IMECE2022 October 30-November 3, 2022, Columbus, Ohio IMECE2022-94914 STRESS CONCENTRATION MECHANISM IN SUPERCONDUCTING COIL QUENCH PHENOMENON BY LARAGE-SCALE FINITE ELEMENT...

... capabilities reached ten kilograms. The geometry was optimized to maximize weight carrying capabilities by increasing the amount of pressure the actuator can withstand. A finite element analysis using ABAQUS software is carried out to evaluate the stresses acting upon the soft gripper. soft gripper...

... parallel manipulator Kane’s method finite element analysis metaheuristics Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition IMECE2022 October 30-November 3, 2022, Columbus, Ohio IMECE2022-88317 NEW DESIGN FOR IMPLEMENTATION OF 2-DEGREE-OF-FREEDOM PLANAR...

... Abstract Computational mechanics is a useful tool in the structural health monitoring community for accurately predicting the mechanical performance of various components. However, high-fidelity models simulated through the finite element analysis (FEA) necessitate a large amount of computing...

... to the increased thermal softening present. Keywords: Cold Spray, Additive Manufacturing, Computational Mechanics, Finite Element Analysis, Lagrangian Analysis, Eulerian Analysis 1. INTRODUCTION Cold spray is a kinetic energy-based additive manufacturing and coating repair process that involves the deposition...

... with the surrounding microstructural features in the materials such as grain boundaries, precipitates, inclusions, and phase boundaries. In addition to the experimental studies, finite element analysis has been employed to evaluate thermal stresses and temperature distribution in the coated energy harvesters during...

... equations and an imposed safety factor, and its accuracy was limited to a ballpark estimation. When a housing needs to be qualified for high pressure applications, a high fidelity FEA (finite element analysis) model needs to be used. However, nonlinear FEA of a pressure housing could take hours due to its...

... Abstract In this paper, a solid disk resonator is designed for manufacturability inside a wafer-level sealed cavity with fusion-bonding process. The device is then simulated using finite element analysis with a variety of manufacturing process tolerances to determine the effect...

..., an industrial strength 3D printing material, was chosen due to its significant yield strength and low density when compared to other 3D printing material and aluminum candidates. To determine whether or not the tolerances and requirements are sufficiently met, finite element analysis of the payload structure...

... Abstract Fused filament fabrication (FFF) is a material extrusion additive manufacturing (AM) process that works well with thermoplastic polymers and is notably inexpensive compared to other AM processes, leading to its increasing popularity for industrial applications. Finite element analysis...

... of bend can be augmented by decreasing velocity ratio, hammering frequency, and effective amplitude. asymmetric rolling incremental bending front end curvature hybrid process finite element analysis analysis of variance (ANOVA) Proceedings of the ASME 2021 International Mechanical...

... interface due to the penetration of water molecules. glass fiber reinforced composite moisture absorption mechanical properties finite element analysis Proceedings of the ASME 2021 International Mechanical Engineering Congress and Exposition IMECE2021 November 1-5, 2021, Virtual, Online...

... that is not application-specific so that it can also be used for the design of different components for AM. The future work includes experimental validation of the strength and vibration performances of the SLM-fabricated design. topology optimization lattice structure finite element analysis additive...

... scale in the farming and forest conservation industries. drone pollination minimum total potential energy formulation safety factor-based design finite element analysis environmental sustainability Proceedings of the ASME 2021 International Mechanical Engineering Congress and Exposition...