An investigation into the passive vibration reduction of the nonlinear spring pendulum system, simulating the ship roll motion is presented. This leads to a four-degree-of-freedom (4-DOF) system subjected to multiparametric excitation forces. The two absorbers in the longitudinal and transverse directions are usually designed to control the vibration near the simultaneous subharmonic and internal resonance where system damage is probable. The theoretical results are obtained by applying the multiple scale perturbation technique (MSPT). The stability of the obtained nonlinear solution is studied and solved numerically. The obtained results from the frequency response curves confirmed the numerical results which were obtained using time history. For validity, the numerical solution is compared with the analytical solution. Effectiveness of the absorbers () are about 13 000 for the first mode () and 10 000 for the second mode (). A threshold value of linear damping coefficient can be used directly for vibration suppression of both vibration modes. Comparison with the available published work is reported.
Vibration Suppression of a Four-Degrees-of-Freedom Nonlinear Spring Pendulum via Longitudinal and Transverse Absorbers
- Views Icon Views
- Share Icon Share
- Search Site
Eissa, M., Kamel, M., and El-Sayed, A. T. (December 8, 2011). "Vibration Suppression of a Four-Degrees-of-Freedom Nonlinear Spring Pendulum via Longitudinal and Transverse Absorbers." ASME. J. Appl. Mech. January 2012; 79(1): 011007. https://doi.org/10.1115/1.4004551
Download citation file: