For the title problem, the punch is assumed to be pressed vertically into the horizontal upper surface of the half space, then slide horizontally sideways. A range of such configurations is identified that permit Shtaerman’s solution for the contact pressure for a rigid frictionless punch to be modified so that it applies to a deformable punch and also yields the contact stresses when the punch slides in the presence of friction. Closed-form expressions are obtained for the peak edge-of-contact stresses. These edge-of-contact stresses can fluctuate significantly with even modest amounts of sliding.
Friction Effects on the Edge-of-Contact Stresses for Sliding Contact Between a Flat Punch With Rounded Corners and a Half Space
Contributed by the Applied Mechanics Division of ASME for publication in the JOURNAL OF APPLIED MECHANICS. Manuscript received August 2, 2017; final manuscript received September 19, 2017; published online October 4, 2017. Assoc. Editor: Shaoxing Qu.
- Views Icon Views
- Share Icon Share
- Search Site
Sinclair, G. B. (October 4, 2017). "Friction Effects on the Edge-of-Contact Stresses for Sliding Contact Between a Flat Punch With Rounded Corners and a Half Space." ASME. J. Appl. Mech. December 2017; 84(12): 121002. https://doi.org/10.1115/1.4037968
Download citation file: