... mechanics failure criteria mechanical properties of materials stress analysis References [1] Zhang , Y. S. , and Khademhosseini , A. , 2017 , “ Advances in Engineering Hydrogels ,” Science , 356 ( 6337 ), p. eaaf3627 . 10.1126/science.aaf3627 [2] Sun...

... echanics . 16 01 2023 08 02 2023 10 02 2023 16 02 2023 energy release rate and delamination failure criteria flow and fracture micromechanics wave propagation Accepted Manuscript Not Copyedited Journal of Applied Mechanics. Received January 16, 2023; Accepted...

... 2022 22 12 2022 23 12 2022 23 01 2023 thin films cohesive zone modeling debonding electronics failure criteria structures National Natural Science Foundation of China 10.13039/501100001809 11521202 11890681 12032001 We may all have the experience...

... mechanics fracture mechanics damage mechanics quasibrittle materials material heterogeneity nonlocal continuum gradient models numerical simulation finite element method strain localization instability localization limiters computational mechanics energy release rate failure criteria...

... compression damage evolution constitutive law constitutive modeling of materials failure criteria mechanical properties of materials References [1] Chen , T. F. , and Siow , K. S. , 2021 , “ Comparing the Mechanical and Thermal-Electrical Properties of Sintered Copper (Cu...

... modeling of materials elasticity failure criteria References [1] Argon , A. S. , 2013 , The Physics of Deformation and Fracture of Polymers , Cambridge University Press , New York . [2] Creton , C. , and Ciccotti , M. , 2016 , “ Fracture and Adhesion of Soft...

... for publication in the J ournal of A pplied M echanics . 13 05 2022 05 07 2022 05 07 2022 26 07 2022 thermomechanical loading shakedown ratchetting creep double-wall transpiration cooled turbine blade computational mechanics elasticity failure criteria plasticity stress...

... ductile-to-brittle transition dynamics failure criteria impact plasticity 28 01 2022 28 03 2022 28 03 2022 19 04 2022 Contributed by the Applied Mechanics Division of ASME for publication in the J ournal of A pplied M echanics . 1 Corresponding author. Email...

...@columbia.edu Email: nnv2102@columbia.edu computational mechanics constitutive modeling of materials elasticity failure criteria micromechanics plasticity Algorithm 1 Training of a pressure and rate-dependent isotropic yield function level set neural network. Require: Data set of N...

... these behaviors. Relations (3) and (4) comprise RIFT. The following ductile/brittle transition is also part of RIFT. The entire failure criteria for the plane stress condition are given by Eq. (5) over the full range of T / C and by Eq. (8) over the partial range shown. It is quite pleasing...

... modeling of materials elasticity failure criteria mechanical properties of materials micromechanics References [1] Berret , J.-F. , and Séréro , Y. , 2001 , “ Evidence of Shear-Induced Fluid Fracture in Telechelic Polymer Networks ,” Phys. Rev. Lett. , 87 ( 4 ), p...

.../100000084 CMMI-1932975 computational mechanics constitutive modeling of materials failure criteria flow and fracture micromechanics plasticity structures Copyright © 2021 by ASME 2021 American Society of Mechanical Engineers 0021-8936/2021/89(1)/011001/11/ $25.00 ...

... Division of ASME for publication in the J ournal of A pplied M echanics . 28 10 2020 10 01 2021 10 01 2021 04 02 2021 computational mechanics elasticity failure criteria structures Thin cylindrical shells are widely used due to their structural efficiency, ease...

..., and failure load. A failure mechanism map for this system is reported that can be used to inform the design of such laminated composites. composite materials laminated beams damage tolerance failure criteria laminates structures The reinforcement plies were sectioned from polycrystalline...

... of materials failure criteria mechanical properties of materials mixed-mode fracture The scratch test consists of removing a superficial layer of material by pushing a stiff cutter or probe along a certain path on the surface of a sample while the applied force is measured. Due to its simplicity...

... Inclusion With Dilatational Transformation Strain in Infinite Elastic Domain ,” ASME J. Appl. Mech. , 66 ( 4 ), pp. 879 – 884 . 10.1115/1.2791792 general strength theory nonequilibrium process complex loadings stability analysis failure criteria micromechanics thermodynamics...

... , “ A Review of the Issues and Treatment Options for Wastewater From Shale Gas Extraction by Hydraulic Fracturing ,” Fuel , 182 , pp. 292 – 303 . 10.1016/j.fuel.2016.05.051 [11] Duveau , G. , Shao , J. F. , and Henry , J. P. , 1998 , “ Assessment of Some Failure Criteria for Strongly...

...Leslie Banks-Sills Failure criteria for a crack between two dissimilar materials are presented. Test data from three different material pairs are considered. The first two consist of an interface crack between glass and epoxy and two dissimilar ceramic clays. For the third material pair...

... criterion, where structural mechanics is suitable to describe the deformation and failure of 2D materials. While for a well-established crack, fracture mechanics-based failure criteria are still valid. It is expected that these findings may also hold for other nanomaterials. This overview presents a useful...

... Division of ASME for publication in the J ournal of A pplied M echanics . 09 12 2019 31 12 2019 31 12 2019 08 01 2020 failure criteria mechanical properties of materials stress analysis structures Polydimethylsiloxane (PDMS) elastomers are soft yet brittle...