The main purpose of this work is to discuss the ability of finite element analyses, together with an appropriate anisotropic fracture criterion, to predict the ultimate load and type of fracture in bones and more specifically in the proximal femur. We show here that the use of a three-dimensional anisotropic criterion provides better results than other well-known isotropic criteria. The criterion parameters and the anisotropic elastic properties were defined in terms of the bone tissue microstructure, quantified by the apparent density and the so-called “fabric tensor”, whose spatial distributions were obtained by means of an anisotropic remodeling model able to capture the main features of the internal structure of long bones. In order to check the validity of the results obtained, they have been compared with those of an experimental work that analyzes different types of fractures induced in the proximal femur by a static overload.
Skip Nav Destination
Article navigation
February 2005
Technical Papers
Finite Element Prediction of Proximal Femoral Fracture Patterns Under Different Loads
M. J. Go´mez-Benito,
M. J. Go´mez-Benito
Group of Structural Mechanics and Material Modeling, Arago´n Institute of Engineering Research (I3A), University of Zaragoza, Marı´a de Luna, 7-50018 Zaragoza, Spain
Search for other works by this author on:
J. M. Garcı´a-Aznar,
J. M. Garcı´a-Aznar
Group of Structural Mechanics and Material Modeling, Arago´n Institute of Engineering Research (I3A), University of Zaragoza, Marı´a de Luna, 7-50018 Zaragoza, Spain
Search for other works by this author on:
M. Doblare´
M. Doblare´
Group of Structural Mechanics and Material Modeling, Arago´n Institute of Engineering Research (I3A), University of Zaragoza, Marı´a de Luna, 7-50018 Zaragoza, Spain
11
Search for other works by this author on:
M. J. Go´mez-Benito
Group of Structural Mechanics and Material Modeling, Arago´n Institute of Engineering Research (I3A), University of Zaragoza, Marı´a de Luna, 7-50018 Zaragoza, Spain
J. M. Garcı´a-Aznar
Group of Structural Mechanics and Material Modeling, Arago´n Institute of Engineering Research (I3A), University of Zaragoza, Marı´a de Luna, 7-50018 Zaragoza, Spain
M. Doblare´
11
Group of Structural Mechanics and Material Modeling, Arago´n Institute of Engineering Research (I3A), University of Zaragoza, Marı´a de Luna, 7-50018 Zaragoza, Spain
Contributed by the Bioengineering Division for publication in the JOURNAL OF BIOMECHANICAL ENGINEERING. Manuscript received by the Bioengineering Division December 30, 2003; revision received September 2, 2004. Associate Editor: Jacques M. Huyghe.
J Biomech Eng. Feb 2005, 127(1): 9-14 (6 pages)
Published Online: March 8, 2005
Article history
Received:
December 30, 2003
Revised:
September 2, 2004
Online:
March 8, 2005
Citation
Go´mez-Benito , M. J., Garcı´a-Aznar , J. M., and Doblare´, M. (March 8, 2005). "Finite Element Prediction of Proximal Femoral Fracture Patterns Under Different Loads ." ASME. J Biomech Eng. February 2005; 127(1): 9–14. https://doi.org/10.1115/1.1835347
Download citation file:
Get Email Alerts
Related Articles
An Efficient and Accurate Prediction of the Stability of Percutaneous Fixation of Acetabular Fractures With Finite Element Simulation
J Biomech Eng (September,2011)
A Biomechanical and Finite Element Analysis of Femoral Neck Notching During Hip Resurfacing
J Biomech Eng (April,2009)
Biomechanical Analysis of a New Carbon Fiber/Flax/Epoxy Bone Fracture Plate Shows Less Stress Shielding Compared to a Standard Clinical Metal Plate
J Biomech Eng (September,2014)
Modeling of Chicken Meat Blade Cutting Using Finite Element Method
J. Med. Devices (June,2011)
Related Proceedings Papers
Related Chapters
DEVELOPMENTS IN STRAIN-BASED FRACTURE ASSESSMENTS - A PERSPECTIVE
Pipeline Integrity Management Under Geohazard Conditions (PIMG)
Novel and Efficient Mathematical and Computational Methods for the Analysis and Architecting of Ultralight Cellular Materials and their Macrostructural Responses
Advances in Computers and Information in Engineering Research, Volume 2
Introduction and Definitions
Handbook on Stiffness & Damping in Mechanical Design