The piano action is the mechanism that transforms the finger force applied to a key into a motion of a hammer that strikes a piano string. This paper presents a state-of-the-art model of a grand piano action, which is based on the five main components of the action mechanism (key, whippen, jack, repetition lever, and hammer). Even though some piano action researchers (e.g., Askenfelt and Jansson) detected some flexibility for the hammer shank in their experiments, all previous piano models have assumed the hammers to be rigid bodies. In this paper, we have accounted for the hammer shank flexibility using a Rayleigh beam model. It turns out that the flexibility of the hammer shank does not significantly affect the rotation of the other parts of the piano mechanism and the impact velocity of the hammer head, compared to the case that the hammer shank has been modeled as a rigid part. However, the flexibility of the hammer shank causes a greater scuffing motion for the hammer head during the contact with the string. To validate the theoretical results, experimental measurements were taken by two strain gauges mounted on the hammer shank, and by optical encoders at three of the joints.
Skip Nav Destination
e-mail: izadbakhsh@alumni.uwaterloo.ca
e-mail: mcphee@real.uwaterloo.ca
e-mail: sbirkett@real.uwaterloo.ca
Article navigation
July 2008
Research Papers
Dynamic Modeling and Experimental Testing of a Piano Action Mechanism With a Flexible Hammer Shank
Adel Izadbakhsh,
Adel Izadbakhsh
Mechanical and Mechatronics Engineering,
e-mail: izadbakhsh@alumni.uwaterloo.ca
University of Waterloo
, Waterloo, ON, N2L3G1, Canada
Search for other works by this author on:
John McPhee,
John McPhee
Systems Design Engineering,
e-mail: mcphee@real.uwaterloo.ca
University of Waterloo
, Waterloo, ON, N2L3G1, Canada
Search for other works by this author on:
Stephen Birkett
Stephen Birkett
Systems Design Engineering,
e-mail: sbirkett@real.uwaterloo.ca
University of Waterloo
, Waterloo, ON, N2L3G1, Canada
Search for other works by this author on:
Adel Izadbakhsh
Mechanical and Mechatronics Engineering,
University of Waterloo
, Waterloo, ON, N2L3G1, Canadae-mail: izadbakhsh@alumni.uwaterloo.ca
John McPhee
Systems Design Engineering,
University of Waterloo
, Waterloo, ON, N2L3G1, Canadae-mail: mcphee@real.uwaterloo.ca
Stephen Birkett
Systems Design Engineering,
University of Waterloo
, Waterloo, ON, N2L3G1, Canadae-mail: sbirkett@real.uwaterloo.ca
J. Comput. Nonlinear Dynam. Jul 2008, 3(3): 031004 (10 pages)
Published Online: April 30, 2008
Article history
Received:
March 25, 2007
Revised:
September 3, 2007
Published:
April 30, 2008
Citation
Izadbakhsh, A., McPhee, J., and Birkett, S. (April 30, 2008). "Dynamic Modeling and Experimental Testing of a Piano Action Mechanism With a Flexible Hammer Shank." ASME. J. Comput. Nonlinear Dynam. July 2008; 3(3): 031004. https://doi.org/10.1115/1.2908180
Download citation file:
Get Email Alerts
Numerical Simulation Method for the Rain-Wind Induced Vibration of the Three-Dimensional Flexible Stay Cable
J. Comput. Nonlinear Dynam
A Numerical Study for Nonlinear Time-Space Fractional Reaction-Diffusion Model of Fourth-Order
J. Comput. Nonlinear Dynam (March 2025)
An Investigation of Dynamic Behavior of Electric Vehicle Gear Trains
J. Comput. Nonlinear Dynam (March 2025)
Nonlinear Dynamic Analysis Framework for Slender Structures Using the Modal Rotation Method
J. Comput. Nonlinear Dynam (March 2025)
Related Articles
Dynamic Modeling and Experimental Testing of a Piano Action Mechanism
J. Comput. Nonlinear Dynam (January,2006)
Measurement of Dynamic Strain
J. Appl. Mech (June,1943)
On the Nonlinear Response of a Flexible Connecting Rod
J. Mech. Des (December,2003)
Maximizing Heat Transfer Through Joint Fin Systems
J. Heat Transfer (February,2006)
Related Proceedings Papers
Related Chapters
Spiking Neural Networks on Self-Updating System-on-Chip for Autonomous Control
International Conference on Mechanical Engineering and Technology (ICMET-London 2011)
Computer Aided Machine Design
Computer Aided Design and Manufacturing
Unbalance
Fundamentals of Rotating Machinery Diagnostics