Cross-coupled precompensation method (CCPM) has been proven efficient in tracking nonlinear spatial curves. It requires a path generating algorithm derived from the mathematical equation of the target curve. This paper discussed the time base transform of target curve from a parametric form. The time based path generating algorithm for the extended involute scroll was then proposed. A comparison among three kinds of tool path generating algorithms were performed. The proposed path algorithms, along with other two algorithms, were implemented and tracked by four different control schemes, US (uncoupled-unprecompensated system), CCS (cross-coupled system), PPM (path precompensation method), and cross-coupled precompensation method (CCPM). The proposed path algorithm for extended involute scroll provided the best accuracy. The proposed algorithm tracked by CCPM achieved the most precise profile especially at high feedrates.

1.
Chin
J.-H.
, and
Tsai
H.-C.
,
1993
, “
A Path Algorithm for Robotics Machining
,”
Robotics & Computer-Integrated Manufacturing
, Vol.
10
, pp.
185
198
.
2.
Chin
J.-H.
, and
Lin
T.-C.
,
1997
, “
Cross-coupled Precompensation Method for the Contouring Accuracy of CNC Machine Tools
,”
Int. J. Machine Tools and Manufacture
, Vol.
37
, No.
7
, pp.
947
967
.
3.
Chin, J.-H., and Liu, Y.-R., 1997, “Cross-Coupled Precompensation Method for Tracking High Order Curves,” Report from Cutting Lab., Institute of Mechanical Engineering, National Chiao Tung Univ., Taiwan, ROC.
4.
Chin, J.-H., and Lin, S.-T., 1997, “The Path Precompensation Method for Flexible Arm Robot,” Robotics and Computer Integrated Manufacturing, Vol. 13.
5.
Chin, J.-H., and Tsai, H.-C., 1997, “Path Precompensation Algorithm for Robotic Machining of Spatial Curves and Surfaces,” Proceeding of the IASTED Int. Conference on Applied Modelling and Simulation, July 27–Aug. 1, Banff, Canada, pp. 272–275.
6.
Chou
J. J.
, and
Yang
D. C. H.
,
1992
, “
Command Generation for Five-Axis CNC Machining
,”
ASME Journal of Engineering for Industry
, Vol.
114
, pp.
15
21
.
7.
Chung
J. H.
, and
Liu
C. H.
,
1991
, “
Cross-Coupled Adaptive Feedrate Control for Multiaxis Machine Tools
,”
ASME JOURNAL OF DYNAMIC SYSTEMS, MEASUREMENT, AND CONTROL
, Vol.
113
, pp.
451
457
.
8.
Chung
J. H.
, and
Liu
C. H.
,
1992
, “
A Model-Reference Adaptive Control Strategy for Improving Contour Accuracy of Multi-axis Machine Tools
,
IEEE Transaction of Industry Application
, Vol.
28
, pp.
221
227
.
9.
Feng, L., Koren, Y., and Borenstein, J., 1993, “Cross-Coupling Motion Controller for Mobile Robots,” IEEE Control Systems, pp. 35–43.
10.
Huan, J., 1982, “Bahnregelung zur Bahnerzeugung an numerisch gesteuerten Werkzeugmaschinen,” Dissertation, University of Stuttgart.
11.
Huang
S. J.
, and
Chen
C. C.
,
1995
, “
Application of Self-tuning Feed-Forward and Cross-Coupling Control in a Retrofitted Milling Machine
,”
Int. J. Machine Tools Manufacture
, Vol.
35
(
4
), pp.
577
591
.
12.
Isermann, R., 1987, Digitale Regelsysteme, Band I, Springer-Verlag Berlin Heidelberg.
13.
Ishii, N., Yamamura, M., Muramatsu, S., Yamamoto, S., and Manabu, S., 1990, “Mechanical Efficiency of a Variable Speed Scroll Compressor,” Proceedings of the International Compressor Engineering Conference at Purdue, pp. 192–199.
14.
Koren, Y., 1979, “Design of Computer Control for Manufacturing Systems,” ASME Journal of Engineering for Industry, Vol. 101.
15.
Koren
Y.
,
1980
, “
Cross-Coupled Biaxial Computer Control for Manufacturing
,”
ASME JOURNAL OF DYNAMIC SYSTEMS, MEASUREMENT, AND CONTROL
, Vol.
102
(
4
), pp.
265
272
.
16.
Koren
Y.
, and
Lo
C C.
,
1991
, “
Variable-Gain Cross-Coupling Controller for Contouring
,”
Annals of the CIRP
, Vol.
40
(
1
), pp.
371
374
.
17.
Kulkarni
P. K.
, and
Srinivasan
K.
,
1989
, “
Optimal Contouring Control of Multi-Axial Feed Drive Servomechanisms
,”
ASME Journal of Engineering for Industry
, Vol.
111
, pp.
140
148
.
18.
Kulkarni
P. K.
, and
Srinivasan
K.
,
1990
, “
Cross-Coupled Control of Biaxial Feed Drive Servomechanisms
,”
ASME JOURNAL OF DYNAMIC SYSTEMS, MEASUREMENT, AND CONTROL
, Vol.
112
(
2
), pp.
225
232
.
19.
Lin
R. S.
, and
Koren
Y.
,
1996
, “
Efficient Tool-Path Planning for Machining Free-Form Surfaces
,”
ASME Journal of Engineering for Industry
, Vol.
118
, pp.
20
28
.
20.
Masory
O.
, and
Koren
Y.
,
1982
, “
Reference-Word Circular Interpolators for CNC Systems
,”
ASME Journal of Engineering for Industry
, Vol.
104
, pp.
400
405
.
21.
Nakamura, S., 1993, Applied Numerical Methods in C, Englewood Cliffs, N.J., Prentice Hall.
22.
Sarachik
P.
and
Ragazzini
J. R.
,
1957
, “
A Two Dimensional Feedback Control System
,”
Trans. AIEE
, Vol.
76
, pp.
55
61
.
23.
Shieh, Y. S., Lee, A. C., and Chen, C. S., 1996, “Cross-Coupled Biaxial Step Control for CNC EDM,” Int. J. Machine Tools and Manufacture, pp. 1–21.
24.
Shpitalni
M.
,
Koren
Y.
, and
Lo
C. C.
,
1994
, “
Realtime Curve Interpolators
,”
Computer-Aided Design
, Vol.
26
(
11
), pp.
832
838
.
25.
Tomizuka
M.
,
Anwar
G.
, and
Tung
E. D.
,
1993
, “
Low Velocity Friction Compensation and Feedforward Solution Based on Repetitive Control
,”
ASME JOURNAL OF DYNAMIC SYSTEMS, MEASUREMENT, AND CONTROL
, Vol.
115
, pp.
279
284
.
26.
Tseng, C H. and Lia, C. F., 1994, “Optimum Design of the Extended, Involute Scroll Curve,” Report from Optimum Lab., Institute of Mechanical Engineering, National Chiao Tung Univ., Taiwan, ROC.
27.
Tseng, C H. and Shih, Y. P., 1995, “Optimum Design of the Extended Involute Scroll Seal,” Report from Optimum Lab, Institute of Mechanical Engineering, National Chiao-Tung Univ., Taiwan, ROC.
28.
Yang
L-F
, and
Chang
W-H.
,
1996
, “
Synchronization of Twin-Gyro Precession Under Cross-Coupled Adaptive Feedforward control
,”
Journal of Guidance, Control, and Dynamics
, Vol.
19
(
3
), pp.
534
539
.
This content is only available via PDF.
You do not currently have access to this content.