This paper presents a discrete-time adaptive sliding control method for SISO nonlinear systems with a bounded disturbance or unmodeled dynamics. Control and adaptation laws considering input saturation are obtained from approximately discretized nonlinear systems. The developed disturbance adaptation or estimation law is in a discrete-time form, and differs from that of conventional adaptive sliding mode control. The closed-loop poles of the feedback linearized sliding surface and the adaptation error dynamics can easily be placed. It can be shown that the adaptation error dynamics can be decoupled from sliding surface dynamics using the proposed scheme. The proposed control law is applied to speed tracking control of an automatic engine subject to unknown external loads. Simulation and experimental results verify the advantages of the proposed control law.
Issue Section:
Technical Papers
Keywords:
stability,
adaptive control,
discrete time systems,
variable structure systems,
internal combustion engines,
velocity control,
nonlinear control systems,
closed loop systems,
poles and zeros,
feedback,
linearisation techniques
Topics:
Dynamics (Mechanics),
Engines,
Errors,
Stress,
Stability,
Feedback,
Simulation,
Tracking control
1.
Milosavljevic
, C.
, 1985
, “General conditions for the existence of a quasi-sliding mode on the switching hyperplane in discrete variable structure systems
,” Autom. Remote Control (Engl. Transl.)
, 46
, pp. 307
–314
.2.
Sarpturk
, S. Z.
, Istefanopulos
, Y.
, and Kaynak
, O.
, 1987
, “The stability of discrete-time sliding mode control systems
,” IEEE Trans. Autom. Control
, 32
, pp. 930
–932
.3.
Furuta
, K.
, 1990
, “Sliding mode control of a discrete system
,” Syst. Control Lett.
14
, pp. 145
–152
.4.
Drakunov, S., and Utkin, V., 1989, “On discrete-time sliding modes,” Proceedings of the IFAC Symposium on Nonlinear Control Systems (NOLCOS), pp. 484–489.
5.
Misawa
, E. A.
, 1997
, “Discrete-time Sliding Mode Control for Nonlinear Systems with Uncertain Uncertainties and Uncertain Control Vector
,” ASME J. Dyn. Syst., Meas., Control
, 119
, pp. 503
–512
.6.
Wang
, W.
, Wu
, G.
, and Yang
, D.
, 1994
, “Variable structure design for uncertain discrete-time systems
,” IEEE Trans. Antennas Propag.
, 39
, pp. 99
–102
.7.
Slotine
, J.-J. E.
, and Coetsee
, J. A.
, 1986
, “Adaptive Sliding Controller Synthesis for Nonlinear Systems
,” Int. J. Control
, 43
, pp. 1631
–1651
.8.
Sastry, S., and Bodson, M., 1989, Adaptive Control; Stability, Convergence, and Robustness, Prentice-Hall, Englewood Cliffs, NJ.
9.
Youcef-Toumi, K., and Wu, S-T., “Robustness and Stability Analysis of Time Delay Control,” Proceedings of the 1992 American Control Conference.
10.
Ohnish
, K.
, 1987
, “A new servo method in mechatronics
,” Trans. Jpn. Soc. Mech. Eng.
, 107-D
, pp. 83
–86
.11.
Elmali
, H.
, and Olgac
, N.
, 1992
, “Sliding Mode Control with Perturbation Estimation (SMCPE): a New Approach
,” Int. J. Control
, 56
, pp. 923
–941
.12.
Kaynak
, O.
, and Denker
, A.
, 1993
, “Discrete-time Sliding Mode Control in the Presence of System Uncertainty
,” Int. J. Control
, 57
, pp. 1147
–1189
.13.
Moura
, J. T.
, Elmali
, H.
, and Olgac
, N.
, 1997
, “Sliding Mode Control With Sliding Purturbation Observer
,” ASME J. Dyn. Syst., Meas., Control
, 119
, pp. 657
–665
.14.
Barmish
, B. R.
, and Leitmann
, G.
, 1982
, “On ultimate boundedness control of uncertain systems in the absence of matching condition
,” IEEE Trans. Autom. Control
, 27
, pp. 153
–158
.15.
Grizzle
, J. W.
, and Kokotovic
, P. V.
, 1988
, “Feedback Linearization of Sampled-Data System
,” IEEE Trans. Autom. Control
, 33
, No. 9
, pp. 857
–859
.16.
Liu
, W.
, Chitour
, Y.
, and Sontag
, E.
, 1996
, “On Finite-Gain Stabilizability of Linear Systems Subject to Input Saturation
,” SIAM J. Control Optim.
, 34
, No. 4
, pp. 1190
–1219
.17.
Hedrick, J. K., and McMahon, D. H., Narendran, V. K., and Swaroop, D., 1991, “Longitudinal vehicle controller design for IVHS systems,” Proceedings of American Control Conference, pp. 3107–3112.
18.
Choi, S-B., and Hedrick, J. K., 1992, “Experimental Implementation of Sliding Controls on Automotive Engines,” Proceedings of the 1992 American Control Conference.
19.
Powell, B. K., 1979, “A Dynamic Model for Automotive Engine Control Analysis,” Proc. of IEEE Conf. on Decision and Control, pp. 120–126.
20.
Powell, J. D., 1987, “A Review of IC Engine Models for Control System Design,” Proc. of Int. Fed. of Auto. Control.
21.
Dobner, D. J., 1982, “Dynamic Engine Model for Control Development, Part 1: Nonlinear and Linear Model Formulation,” Int. J. of Vehicle Design, SP4.
22.
Poirier, D. C., 1983, “An Analysis of Fuel System Accuracy and Response of a Port Injected Engine,” B. S. thesis, GMI Engineering and management Institute, Flint, MI.
23.
Moskwa, J. J., and Hedrick, J. K., 1989, “Modeling and Validation of Automotive Engines for Control Algorithm Development,” ASME WAM, Advanced Automotive Technologies, DSC-Vol. 13, Karmel, A. M., et al. ed.
24.
Won
, M-C.
, and Hedrick
, J. K.
, 1996
, “Multiple Surface Sliding Control of a Class of Uncertain Nonlinear Systems
,” Int. J. Control
, 64
, pp. 693
–706
.25.
Green, J. H., and Hedrick, K., 1990, “Nonlinear speed control of automotive engines,” Proceedings of the 1990 American Control Conference, San Diego, pp. 2891–2897.
Copyright © 2001
by ASME
You do not currently have access to this content.
