The performance of fuel cells can be significantly improved by using optimum operating conditions that maximize the power density subject to constraints. Despite its significance, relatively scant work is reported in the open literature on the model-assisted optimization of fuel cells. In this paper, a methodology for model-based optimization is presented by considering a one-dimensional nonisothermal description of a fuel cell operating on reformate feed. The numerical model is coupled with a continuous search simulated annealing optimization scheme to determine the optimum solutions for selected process constraints. Optimization results are presented over a range of fuel cell design parameters to assess the effects of membrane thickness, electrode thickness, constraint values, and CO concentration on the optimum operating conditions.
Skip Nav Destination
e-mail: r.pitchumani@uconn.edu
Article navigation
May 2005
This article was originally published in
Journal of Fuel Cell Science and Technology
Research Papers
Optimization of the Operating Parameters of a Proton Exchange Membrane Fuel Cell for Maximum Power Density
A. Mawardi,
A. Mawardi
Advanced Materials and Technologies Laboratory, Department of Mechanical Engineering, University of Connecticut
, Storrs, CT 06269-3139
Search for other works by this author on:
F. Yang,
F. Yang
Advanced Materials and Technologies Laboratory, Department of Mechanical Engineering, University of Connecticut
, Storrs, CT 06269-3139
Search for other works by this author on:
R. Pitchumani
e-mail: r.pitchumani@uconn.edu
R. Pitchumani
Fellow ASME
Advanced Materials and Technologies Laboratory, Department of Mechanical Engineering, University of Connecticut
, Storrs, CT 06269-3139
Search for other works by this author on:
A. Mawardi
Advanced Materials and Technologies Laboratory, Department of Mechanical Engineering, University of Connecticut
, Storrs, CT 06269-3139
F. Yang
Advanced Materials and Technologies Laboratory, Department of Mechanical Engineering, University of Connecticut
, Storrs, CT 06269-3139
R. Pitchumani
Fellow ASME
Advanced Materials and Technologies Laboratory, Department of Mechanical Engineering, University of Connecticut
, Storrs, CT 06269-3139e-mail: r.pitchumani@uconn.edu
J. Fuel Cell Sci. Technol. May 2005, 2(2): 121-135 (15 pages)
Published Online: January 7, 2005
Article history
Received:
November 1, 2004
Revised:
January 7, 2005
Accepted:
January 7, 2005
Citation
Mawardi, A., Yang, F., and Pitchumani, R. (January 7, 2005). "Optimization of the Operating Parameters of a Proton Exchange Membrane Fuel Cell for Maximum Power Density." ASME. J. Fuel Cell Sci. Technol. May 2005; 2(2): 121–135. https://doi.org/10.1115/1.1867978
Download citation file:
Get Email Alerts
Cited By
Optimization of Thermal Non-Uniformity Challenges in Liquid-Cooled Lithium-Ion Battery Packs Using NSGA-II
J. Electrochem. En. Conv. Stor (November 2025)
In Situ Synthesis of Nano PtRuW/WC Hydrogen Evolution Reaction Catalyst for Acid Hydrogen Evolution by a Microwave Method
J. Electrochem. En. Conv. Stor (November 2025)
Intelligently Constructing Polyaniline/Nickel Hydroxide Core–Shell Nanoflowers as Anode for Flexible Electrode-Enhanced Lithium-/Sodium-Ion Batteries
J. Electrochem. En. Conv. Stor (November 2025)
State of Health Estimation Method for Lithium-Ion Batteries Based on Multifeature Fusion and BO-BiGRU Model
J. Electrochem. En. Conv. Stor (November 2025)
Related Articles
Simplified Model to Predict Incipient Flooding/Dehydration in Proton Exchange Membrane Fuel Cells
J. Fuel Cell Sci. Technol (August,2007)
Effects of Operating Parameters on the Current Density Distribution in Proton Exchange Membrane Fuel Cells
J. Fuel Cell Sci. Technol (November,2006)
Transport Phenomena Analysis in Proton Exchange Membrane Fuel Cells
J. Heat Transfer (December,2005)
Optimizing the Performance of a Single PEM Fuel Cell
J. Fuel Cell Sci. Technol (August,2008)
Related Proceedings Papers
Related Chapters
Experiment Study on the Current Density Distribution of PEMFC
Inaugural US-EU-China Thermophysics Conference-Renewable Energy 2009 (UECTC 2009 Proceedings)
The Effect of the Annealing Schedule on Simulated Annealing for Function Optimization and Fuel Cell Design
Intelligent Engineering Systems through Artificial Neural Networks, Volume 20
Three-Dimensional Numerical Simulation and Design of PEM Fuel Cell
Inaugural US-EU-China Thermophysics Conference-Renewable Energy 2009 (UECTC 2009 Proceedings)