This paper describes a model predictive control (MPC) scheme as implemented on a polymer electrolyte membrane fuel cell system. The goal of this work is to reduce parasitic power consumption of the system, improving net system efficiency. The MPC is capable of balancing this performance objective (reducing power loss) with the objective of maintaining oxygen excess ratio, a parameter identified as essential to reliable fuel cell operation. Two configurations of a MPC were implemented in SIMULINK and connected to a dynamic system model in EASY5 using the XML (extensible markup language) metadata interchange (XMI) interface. Substantial improvements were noted on one of the MPC configurations compared to the reference feedforward and proportional-integral-derivative (PID) controller.
Skip Nav Destination
e-mail: mhowe@vt.edu
e-mail: rocheleau@sc.edu
Article navigation
August 2009
This article was originally published in
Journal of Fuel Cell Science and Technology
Research Papers
Use of Optimal Controls to Mitigate Competing Performance Objectives in a Polymer Electrolyte Membrane Fuel Cell System
Matthew A. Howe,
Matthew A. Howe
Advanced Actuators Research Group, Department of Mechanical Engineering,
e-mail: mhowe@vt.edu
University of South Carolina
, Columbia, SC 29208
Search for other works by this author on:
David N. Rocheleau
David N. Rocheleau
Advanced Actuators Research Group, Department of Mechanical Engineering,
e-mail: rocheleau@sc.edu
University of South Carolina
, Columbia, SC 29208
Search for other works by this author on:
Matthew A. Howe
Advanced Actuators Research Group, Department of Mechanical Engineering,
University of South Carolina
, Columbia, SC 29208e-mail: mhowe@vt.edu
David N. Rocheleau
Advanced Actuators Research Group, Department of Mechanical Engineering,
University of South Carolina
, Columbia, SC 29208e-mail: rocheleau@sc.edu
J. Fuel Cell Sci. Technol. Aug 2009, 6(3): 031006 (5 pages)
Published Online: May 12, 2009
Article history
Received:
June 16, 2007
Revised:
March 4, 2008
Published:
May 12, 2009
Citation
Howe, M. A., and Rocheleau, D. N. (May 12, 2009). "Use of Optimal Controls to Mitigate Competing Performance Objectives in a Polymer Electrolyte Membrane Fuel Cell System." ASME. J. Fuel Cell Sci. Technol. August 2009; 6(3): 031006. https://doi.org/10.1115/1.3005583
Download citation file:
Get Email Alerts
Cited By
A Fault Diagnosis Method for Electric Vehicle Lithium Power Batteries Based on Dual-Feature Extraction From the Time and Frequency Domains
J. Electrochem. En. Conv. Stor (August 2025)
Optimization of thermal non-uniformity challenges in liquid-cooled lithium-ion battery packs using NSGA-II
J. Electrochem. En. Conv. Stor
Ultrasound-enabled adaptive protocol for fast charging of lithium-ion batteries
J. Electrochem. En. Conv. Stor
Effects of Sintering Temperature on the Electrical Performance of Ce0.8Sm0.2O1.9–Pr2NiO4 Composite Electrolyte for SOFCs
J. Electrochem. En. Conv. Stor (August 2025)
Related Articles
Nonminimum-Phase Phenomenon of PEM Fuel Cell Membrane Humidifiers
J. Dyn. Sys., Meas., Control (July,2008)
State-Space Approach to LQG Multivariable Predictive and Feedforward Optimal Control
J. Dyn. Sys., Meas., Control (December,1994)
A Predictive Control Based on Neural Network for Dynamic Model of Proton Exchange Membrane Fuel Cell
J. Fuel Cell Sci. Technol (June,2013)
Mixed Sky-Hook and ADD: Approaching the Filtering Limits of a Semi-Active Suspension
J. Dyn. Sys., Meas., Control (July,2007)
Related Proceedings Papers
Related Chapters
Non-Equidistance GOM Predictive Control System about Smelting
International Conference on Instrumentation, Measurement, Circuits and Systems (ICIMCS 2011)
A Nonlinear Model Predictive Control Strategy for Superheater Process in Thermal Power Plant
International Conference on Mechanical Engineering and Technology (ICMET-London 2011)
Model Predictive Control of Three-Phase Inverter with Modeling Error Compensation
International Conference on Software Technology and Engineering (ICSTE 2012)