The passive cooling, including the transient start-up process, of a leadless chip carrier package mounted on a vertical substrate in a liquid filled cubic enclosure is investigated numerically. A relatively detailed thermal model of the electronic package is included. The governing three-dimensional unsteady equations for natural convection within the fluid and for the coupled heat conduction in the package are solved numerically using a finite difference method. The transient heat up of the system can be characterized by four stages: 1) initial heat up of the chip with some conduction through the package and the surrounding fluid; 2) increased conduction characterized by symmetric thermal spreading through the substrate, accompanied by the development of the natural convection flow field; 3) increased convection effects, as the buoyant driving force reaches its peak level, leading to asymmetric spreading through the substrate and a strong plume above the package; 4) gradual approach to steady state as the fluid in the enclosure is slowly heated, with reduced buoyant driving force and hence decreasing velocities. Steady-state conditions are characterized by thin boundary layers along the hot and cold surfaces, well stratified temperature in the core, a strong plume above the package, and oval shaped isotherms along the substrate surface. With FC-75 as the coolant, a large fraction of the heat generated in the chip is conducted to the substrate and then transferred to the fluid, due to the high thermal conductivity of the substrate relative to that of the fluid. Even when the upper lid of the package is removed, exposing the chip directly to the fluid, the chip temperature drops only by 5 percent, indicating the importance of substrate conduction. Use of a chip that has twice the cross-sectional area as the base case results in a 25 percent drop in chip temperature, with little effect on the remainder of the flow. When water is used as the coolant instead of FC-75, the nondimensional temperature of the chip increases, due to the lower Rayleigh number and lower ratio of substrate-to-fluid thermal conductivity. In dimensional units, however, the actual chip temperature is 25°C cooler.
Skip Nav Destination
Article navigation
September 1992
Research Papers
Transient Natural Convection From a Leadless Chip Carrier in a Liquid Filled Enclosure: A Numerical Study
D. Wroblewski,
D. Wroblewski
Department of Mechanical Engineering, Naval Postgraduate School, Monterey, CA 93943
Search for other works by this author on:
Y. Joshi
Y. Joshi
Department of Mechanical Engineering, Naval Postgraduate School, Monterey, CA 93943
Search for other works by this author on:
D. Wroblewski
Department of Mechanical Engineering, Naval Postgraduate School, Monterey, CA 93943
Y. Joshi
Department of Mechanical Engineering, Naval Postgraduate School, Monterey, CA 93943
J. Electron. Packag. Sep 1992, 114(3): 271-279 (9 pages)
Published Online: September 1, 1992
Article history
Received:
October 28, 1991
Revised:
March 30, 1992
Online:
April 28, 2008
Citation
Wroblewski, D., and Joshi, Y. (September 1, 1992). "Transient Natural Convection From a Leadless Chip Carrier in a Liquid Filled Enclosure: A Numerical Study." ASME. J. Electron. Packag. September 1992; 114(3): 271–279. https://doi.org/10.1115/1.2905451
Download citation file:
Get Email Alerts
Cited By
Enhancing Mechanical Reliability of Silver-Sintered Joints With Copper Nanowires in High-Power Electronic Devices
J. Electron. Packag (December 2024)
Special Issue on InterPACK2023
J. Electron. Packag (December 2024)
Impact of Encapsulated Phase Change Material Additives for Improved Thermal Performance of Silicone Gel Insulation
J. Electron. Packag (December 2024)
Related Articles
Onset and Development of Natural Convection Above a Suddenly Heated Horizontal Surface
J. Heat Transfer (November,1995)
Scaling of Natural Convection of an Inclined Flat Plate: Sudden Cooling Condition
J. Heat Transfer (April,2011)
Transient Hydrodynamic Phenomena and Conjugate Heat Transfer During Cooling of Water in an Underground Thermal Storage Tank
J. Heat Transfer (February,2004)
Effect of Buoyancy on the Melting and Freezing Process
J. Heat Transfer (February,1967)
Related Proceedings Papers
Related Chapters
Introduction
Introduction to Finite Element, Boundary Element, and Meshless Methods: With Applications to Heat Transfer and Fluid Flow
Energy Balance for a Swimming Pool
Electromagnetic Waves and Heat Transfer: Sensitivites to Governing Variables in Everyday Life
Completing the Picture
Air Engines: The History, Science, and Reality of the Perfect Engine