Abstract
Due to the high efficiency, light-emitting diodes (LED) filament lamps have become more and more popular alternative to the incandescent lamp. However, the heat generated by the LED chips is traditionally dissipated by relying on the natural convection within lamps, resulting in poor heat dissipation performance for LED filament lamps. A numerical simulation model of the typical LED filament lamp was established to simulate and analyze the heat dissipation and airflow phenomenon of LED filament lamps in this study. In addition, increasing lamp sizes, increasing phosphor diameters, and using finned phosphor layers were considered as optimization measures to improve the heat dissipation performance of LED filament lamps. When these optimization measures are applied, chip junction temperatures are reduced. A reduction of 6.9 °C is seen when the lamp radius is increased from 25 mm to 31 mm. When the phosphor diameter is increased to 4 mm from 2 mm, the junction temperature is reduced by 17.2 °C. Integration of a finned phosphor layer where there are 12 fins at a height of 1 mm and thickness of 0.2 mm in the layer decreased the junction temperature by 10.9 °C. These optimization results provide technical support for the design and manufacture of LED filament lamps, and thermal analysis results provide theoretical support for the promotion of these optimization methods.
Issue Section:
Research Papers
References
1.
Liu
,
S.
, and
Luo
,
X.
, 2011
, LED Packaging for Lighting Applications
(Design, Manufacturing and Testing), Chemical Industry Press, Beijing, China.10.1002/9780470827857.ch32.
Luo
,
X.
,
Hu
,
R.
,
Liu
,
S.
, and
Wang
,
K.
, 2016
, “
Heat and Fluid Flow in High-Power Led Packaging and Applications
,” Prog. Energy Combust. Sci.
,
56
, pp. 1
–32
.10.1016/j.pecs.2016.05.0033.
Bao
,
Y.
,
Cai
,
Y.
,
Wang
,
J.
,
Shi
,
Y.
, and
Wang
,
J.
, 2019
, “
Experimental Study on LED Heat Dissipation Based on Enhanced Corona Wind by Graphene Decoration
,” IEEE Trans. Plasma Sci.
,
47
(8
), pp. 4121
–4126
.10.1109/TPS.2019.29242874.
Park
,
S. J.
,
Jang
,
D.
,
Yook
,
S. J.
, and
Lee
,
K. S.
, 2016
, “
Optimization of a Chimney Design for Cooling Efficiency of a Radial Heat Sink in a Led Downlight
,” Energy Convers. Manage.
,
114
, pp. 180
–187
.10.1016/j.enconman.2016.02.0245.
Hakata
,
K.
, and
Matsuoka
,
T.
, 2009
, “
Light-Emitting Device and Lighting Apparatus Incorporating Same
,” U.S. Patent No. 8400051B2.6.
Feng
,
W.
,
Feng
,
B.
,
Zhao
,
F.
,
Shieh
,
B.
, and
Lee
,
R.
, 2015
, “
Simulation and Optimization on Thermal Performance of LED Filament Light Bulb
,” 12th China International Forum on Solid State Lighting
(SSLCHINA
), Shenzhen, China, Nov. 2–4, pp. 88–92.10.1109/SSLCHINA.2015.73606967.
Steigerwald
,
D. A.
,
Bhat
,
J. C.
,
Collins
,
D.
,
Fletcher
,
R. M.
,
Holcomb
,
M. O.
,
Ludowise
,
M. J.
,
Martin
,
P. S.
, and
Rudaz
,
S. L.
, 2002
, “
Illumination With Solid State Lighting Technology
,” IEEE J. Sel. Top. Quantum Electron.
,
8
(2
), pp. 310
–320
.10.1109/2944.9991868.
Niki
,
I.
,
Narukawa
,
Y.
,
Morita
,
D.
,
Sonobe
,
S-Y.
,
Mitani
,
T.
,
Tamaki
,
H.
,
Murazaki
,
Y.
,
Yamada
,
M.
, and
Mukai
,
T.
, 2004
, “
White Leds for Solid State Lighting
,” Proc. SPIE
,
5187
, pp. 1
–9
.10.1117/12.5140699.
De Almeida
,
A.
,
Santos
,
B.
,
Paolo
,
B.
,
Quicheron
,
M.
, and
Kazmerski
,
L.
, 2014
, “
Solid State Lighting Review—Potential and Challenges in Europe
,” Renewable Sustainable Energy Rev.
,
34
, pp. 30
–48
.10.1016/j.rser.2014.02.02910.
Li
,
B.
, and
Byon
,
C.
, 2015
, “
Investigation of Natural Convection Heat Transfer Around a Radial Heat Sink With a Concentric Ring
,” Int. J. Heat Mass Transfer
,
89
, pp. 159
–164
.10.1016/j.ijheatmasstransfer.2015.04.10611.
Lee
,
D.
,
Choi
,
H.
,
Jeong
,
S.
,
Jeon
,
C. H.
,
Lee
,
D.
,
Lim
,
J.
,
Byon
,
C.
, and
Choi
,
J.
, 2018
, “
A Study on the Measurement and Prediction of LED Junction Temperature
,” Int. J. Heat Mass Transfer
,
127
, pp. 1243
–1252
.10.1016/j.ijheatmasstransfer.2018.07.09112.
Jang
,
D.
,
Kim
,
D. R.
, and
Lee
,
K. S.
, 2015
, “
Correlation of Cross-Cut Cylindrical Heat Sink to Improve the Orientation Effect of Led Light Bulbs
,” Int. J. Heat Mass Transfer
,
84
, pp. 821
–826
.10.1016/j.ijheatmasstransfer.2015.01.08113.
Jang
,
D.
,
Park
,
S. J.
,
Yook
,
S. J.
, and
Lee
,
K. S.
, 2014
, “
The Orientation Effect for Cylindrical Heat Sinks With Application to Led Light Bulbs
,” Int. J. Heat Mass Transfer
,
71
, pp. 496
–502
.10.1016/j.ijheatmasstransfer.2013.12.03714.
Wang
,
R.
, and
Wang
,
J.
, 2016
, “
Analyzing the Structural Designs and Thermal Performance of Nonmetal Lighting Devices of LED Bulbs
,” Int. J. Heat Mass Transfer
,
99
, pp. 750
–761
.10.1016/j.ijheatmasstransfer.2016.03.11215.
Law
,
T.
,
Lim
,
F.
,
Li
,
Y.
,
Puan
,
X.
,
Sng
,
G.
, and
Teo
,
J.
, 2017
, “
Effect of Packaging Architecture on the Optical and Thermal Performances of High-Power Light Emitting Diodes
,” ASME J. Electron. Packag.
,
139
(3
), p. 031003
.10.1115/1.403606616.
Kim
,
K. J.
, 2014
, “
Performance of Hybrid Fin Heat Sinks for Thermal Control of Light Emitting Diode Lighting Modules
,” ASME J. Electron. Packag.
,
136
(1
), p. 011002
.10.1115/1.402567317.
Lin
,
Y.
,
You
,
J.
,
Tran
,
N.
,
He
,
Y.
, and
Shi
,
F. G.
, 2011
, “
Packaging of Phosphor Based High Power White LEDs: Effects of Phosphor Concentration and Packaging Configuration
,” ASME J. Electron. Packag.
,
133
(1
), p. 011009
.10.1115/1.400321618.
Jang
,
D.
,
Park
,
S. J.
, and
Lee
,
K. S.
, 2015
, “
Thermal Performance of a PCB Channel Heat Sink for Led Light Bulbs
,” Int. J. Heat Mass Transfer
,
89
, pp. 1290
–1296
.10.1016/j.ijheatmasstransfer.2015.06.02719.
Zheng
,
H.
,
Xu
,
C.
,
Liu
,
J.
,
Chu
,
J.
,
Liu
,
S.
,
Zeng
,
X.
, and
Sun
,
Y.
, 2017
, “
A Novel Cooling Method for LED Filament Bulb Using Ionic Wind
,” 16th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems
(ITherm
), Orlando, FL, May 30–June 2, pp. 998
–1003
.10.1109/ITHERM.2017.799259720.
Xu
,
C.
,
Zhang
,
Z.
,
Chu
,
J.
,
Wu
,
J.
,
Lei
,
X.
,
Zheng
,
H.
, and
Liu
,
S.
, 2016
, “
Thermal Dissipation Enhancement of LED Filament Bulb by Ionic Wind
,” 17th IEEE International Conference on Electronic Packaging Technology
(ICEPT
), Wuhan, China, Aug. 16–19, pp. 1212
–1215
.10.1109/ICEPT.2016.758334121.
Park
,
S. J.
,
Jang
,
D.
, and
Lee
,
K. S.
, 2016
, “
Thermal Performance and Orientation Effect of an Inclined Cross-Cut Cylindrical Heat Sink for Led Light Bulbs
,” Int. J. Heat Mass Transfer
,
103
, pp. 1371
–1377
.10.1016/j.ijheatmasstransfer.2016.08.05622.
Chen
,
Y.
,
Zeng
,
Q.
,
Zhao
,
L.
,
Li
,
Y.
,
Huang
,
G.
, and
Li
,
B.
, 2019
, “
Optimization of Helium Inflating on Heat Dissipation and Luminescence Properties of the A60 LED Filament Lamps
,” Int. J. Photoenergy
,
2019
, pp. 1
–5
.10.1155/2019/629203623.
Yuan
,
L.
,
Liu
,
S.
,
Chen
,
M.
, and
Luo
,
X.
, 2006
, “
Thermal Analysis of High Power Led Array Packaging With Microchannel Cooler
,” Seventh International Conference on Electronics Packaging Technology
, Shanghai, China, Aug. 26–29, pp. 1
–5
.10.1109/ICEPT.2006.35982624.
Song
,
P.
,
Yin
,
L.
,
Bai
,
Y.
, and
Zhang
,
J.
, 2015
, “
Study on the Influences of the Substrate Parameters for Thermal Spreading Resistance of Light Emitting Diode
,” Optoelectron. Adv. Mater. Rapid Commun.
,
9
(9
), pp. 1075
–1080
.https://www.researchgate.net/publication/284804194_Study_on_the_influences_of_the_substrate_parameters_for_thermal_spreading_resistance_of_light_emitting_diode25.
Pavlidis
,
G.
,
Kim
,
S. H.
,
Abid
,
I.
,
Zegaoui
,
M.
,
Medjdoub
,
F.
, and
Graham
,
S.
, 2019
, “
The Effects of AlN and Copper Back Side Deposition on the Performance of Etched Back GaN/Si HEMTs
,” IEEE Electron Device Lett.
,
40
(7
), pp. 1060
–1063
.10.1109/LED.2019.291598426.
Yang
,
S.
,
Mao
,
T.
,
Jeng
,
T.
,
Tzeng
,
S.
,
Shie
,
T.
,
Chen
,
C.
, and
Chen
,
P.
, 2012
, “
LED Heat Sink and Graphite Heat Sink Process Technology Development With Vibration Cooling Fluid Characteristics
,” J. Vibroeng.
,
14
(4
), pp. 1500
–1506
.https://www.jvejournals.com/article/10707/pdf27.
Park
,
J.
,
Yun
,
D.
,
Kim
,
S.
, and
Choi
,
Y.
, 2019
, “
Suppression of Self-Heating Effects in 3-D V-NAND Flash Memory Using a Plugged Pillar-Shaped Heat Sink
,” IEEE Electron Device Lett.
,
40
(2
), pp. 212
–215
.10.1109/LED.2018.288903728.
Lei
,
X.
,
Zheng
,
H.
,
Guo
,
X.
, and
Liu
,
S.
, 2016
, “
Reduction of Die-Bonding Interface Thermal Resistance for High-Power LEDs Through Embedding Packaging Structure
,” 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems
(ITherm
), Las Vegas, NV, May 31–June 3, pp. 1058
–1064
.10.1109/ITHERM.2016.751766429.
Maaspuro
,
M.
, and
Tuominen
,
A.
, 2013
, “
Thermal Analysis of Led Spot Lighting Device Operating in External Natural or Forced Heat Convection
,” Microelectron. Reliab.
,
53
(3
), pp. 428
–434
.10.1016/j.microrel.2012.10.00430.
Zhang
,
Q.
,
Pi
,
Z.
,
Chen
,
M.
,
Luo
,
X.
,
Xu
,
L.
, and
Liu
,
S.
, 2011
, “
Effective Thermal Conductivity of Silicone/Phosphor Composites
,” J. Compos. Mater.
,
45
(23
), pp. 2465
–2473
.10.1177/002199831140110531.
Li
,
L.
,
Zheng
,
H.
,
Yuan
,
C.
,
Hu
,
R.
, and
Luo
,
X.
, 2016
, “
Study on Effective Thermal Conductivity of Silicone/Phosphor Composite and Its Size Effect by Lattice Boltzmann Method
,” Heat Mass Transfer
,
52
(12
), pp. 2813
–2821
.10.1007/s00231-016-1784-732.
Jang
,
D.
,
Yu
,
S. H.
, and
Lee
,
K. S.
, 2012
, “
Multidisciplinary Optimization of a Pin-Fin Radial Heat Sink for Led Lighting Applications
,” Int. J. Heat Mass Transfer
,
55
(4
), pp. 515
–521
.10.1016/j.ijheatmasstransfer.2011.11.01633.
Arik
,
M.
,
Becker
,
C. A.
,
Weaver
,
S. E.
, and
Petroski
,
J.
, 2004
, “
Thermal Management of Leds: Package to System
,” Proc. SPIE
,
5187
, pp. 64
–75
.10.1117/12.51273134.
Liu
,
Y.
,
Stanley
,
Y. Y. L.
,
Cell
,
K. Y. W.
,
Cadmus
,
A. Y.
,
Zhang
,
G.
, and
Sun
,
F.
, 2015
, “
Thermal Simulation of Flexible LED Package Enhanced With Copper Pillars
,” J. Semicond.
,
36
(6
), p. 064011
.10.1088/1674-4926/36/6/06401135.
Leng
,
L.
,
Retnasamy
,
V.
,
Shahimin
,
M. M.
,
Saulii
,
Z.
,
Taniselass
,
S.
,
Bin Ab Aziz
,
M. H.
,
Vairavan
,
R.
, and
Kirtsaeng
,
S.
, 2017
, “
Validation of Thermal Effects of LED Package by Using Elmer Finite Element Simulation Method
,” Conference on Light-Emitting Diodes—Materials, Devices, and Applications for Solid State Lighting XXI
, San Francisco, CA, p. 10124
.10.1117/12.225721636.
Li
,
B.
, and
Byon
,
C.
, 2015
, “
Orientation Effects on Thermal Performance of Radial Heat Sinks With a Concentric Ring Subject to Natural Convection
,” Int. J. Heat Mass Transfer
,
90
, pp. 102
–108
.10.1016/j.ijheatmasstransfer.2015.06.01237.
Ravindra
,
N. M.
,
Sopori
,
B.
,
Gokce
,
O. H.
,
Cheng
,
S. X.
,
Shenoy
,
A.
,
Jin
,
L.
,
Abedrabbo
,
S.
,
Chen
,
W.
, and
Zhang
,
Y.
, 2001
, “
Emissivity Measurements and Modeling of Silicon-Related Materials: An Overview
,” Int. J. Thermophys.
,
22
(5
), pp. 1593
–1611
.10.1023/A:101286971017338.
Best
,
H. G.
, 1949
, “
Emissivities of Copper and Aluminum
,” J. Opt. Soc. Am.
,
39
(12
), pp. 1009
–1009
.10.1364/JOSA.39.00100939.
Farooq
,
T.
, and
Qian
,
K. Y.
, 2015
, “
High Luminance Low Etendue White Light Source Using Blue Laser Over Static Phosphor
,” Annual Conference of the Chinese-Society-for-Optical-Engineering on Applied Optics and Photonics, China
(AOPC
),
Beijing, China
, May 5–7.10.1117/12.219776040.
Kim
,
T. H.
,
Do
,
K. H.
, and
Kim
,
D. K.
, 2011
, “
Closed Form Correlations for Thermal Optimization of Plate-Fin Heat Sinks Under Natural Convection
,” Int. J. Heat Mass Transfer
,
54
(5–6
), pp. 1210
–1216
.10.1016/j.ijheatmasstransfer.2010.10.03241.
Baudin
,
N.
,
McEvoy
,
J.
,
Rouzes
,
M.
,
Persoons
,
T.
, and
Robinson
,
A.
, 2019
, “
Experimental Investigation of Ionic Wind Cooling in Plate Fin Heatsinks and Needle Electrode Arrangements
,” Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems
(Itherm
), Las Vegas, NV, May 28–31, pp. 810
–814
.10.1109/ITHERM.2019.875742342.
Oguntala
,
G.
,
Sobamowo
,
G.
,
Abd-Alhameed
,
R.
, and
Noras
,
J.
, 2019
, “
Numerical Study of Performance of Porous Fin Heat Sink of Functionally Graded Material for Improved Thermal Management of Consumer Electronics
,” IEEE Trans. Compon. Packag. Manuf. Technol.
,
9
(7
), pp. 1271
–1283
.10.1109/TCPMT.2019.290715043.
Yüncü
,
H.
, and
Anbar
,
G.
, 1998
, “
An Experimental Investigation on Performance of Rectangular Fins on a Horizontal Base in Free Convection Heat Transfer
,” Heat Mass Transfer
,
33
(5–6
), pp. 507
–514
.10.1007/s00231005022244.
Chen
,
H.
,
Lin
,
S.
, and
Xiong
,
C.
, 2017
, “
Analysis and Modeling of Thermal Effect and Optical Characteristic of LED Systems With Parallel Plate-Fin Heatsink
,” IEEE Photonics J.
,
9
(2
), pp. 1
–11
.10.1109/JPHOT.2017.267085845.
Huang
,
X.
,
Shi
,
C.
,
Zhou
,
J.
,
Lu
,
X.
, and
Xu
,
G.
, 2019
, “
Performance Analysis and Design Optimization of Heat Pipe Sink With a Variable Height Fin Array Under Natural Convection
,” Appl. Therm. Eng.
,
159
, p. 113939
.10.1016/j.applthermaleng.2019.113939Copyright © 2021 by ASME
You do not currently have access to this content.
