This work presents an uncertainty study in the numerical simulation of the air-water droplet motion through three types of drift eliminators using the grid convergence index (GCI) method. The analysis of independence of the results with respect to the fineness of mesh is developed with special emphasis on the influence of the nondimensional sub-layer scaled distance. The coefficient of pressure drop and the droplet collection efficiency are numerically calculated. It may be concluded that using the GCI method leads to reliable numerical results, but it is also necessary to establish a sufficiently fine mesh near the walls.
References
1.
Gan
, G.
, Riffat
, S. B.
, Shao
, L.
, and Doherty
, P.
, 2001, “Application of CFD to Closed-Wet Cooling Towers
,” Appl. Therm. Eng.
, 21
, pp. 79
–92
.2.
Kloppers
, J. C.
, and Kröger
, D. G.
, 2005, “Cooling Tower Performance Evaluation: Merkel, Poppe, and e-NTU Methods of Analysis
,” ASME J. Eng. Gas Turbines Power
, 127
, pp. 1
–7
.3.
Meroney
, R. N.
, 2008, “Protocol for CFD Prediction of Cooling-Tower Drift in an Urban Environment
,” J. Wind Eng. Ind. Aerodyn.
, 96
, pp. 1789
–1804
.4.
Gardner
, B. R.
, and Lowe
, H. J.
, 1974, “The Research and Development Background to the Environmental Problems of Natural Draught Cooling Towers
,” Atmos. Environ.
, 8
, pp. 313
–320
.5.
Chan
, J.
, and Golay
, M. W.
, 1977, “Comparative Performance Evaluation of Current Design Evaporative Cooling Tower Drift Eliminators
,” Atmos. Environ.
, 11
, pp. 775
–781
.6.
James
, P. W.
, Wang
, Y.
, Azzopardi
, B. J.
, and Hughes
, J. P.
, 2005, “A Model for Liquid Film Flow and Separation in a Wave-Plate Mist Eliminator
,” Chem. Eng. Res. Des.
, 83(A5)
, pp. 468
–477
.7.
Galletti
, C.
, Brunazzi
, E.
, and Tognotti
, L.
, 2008, “A Numerical Model for Gas Flow and Droplet Motion in Wave-Plate Mist Eliminators with Drainage Channels
,” Chem. Eng. Sci.
, 63
, pp. 5639
–5652
.8.
Freitas
, C. J.
, 2002, “The Issue of Numerical Uncertainty
,” Appl. Math. Model.
, 26
, pp. 237
–248
.9.
Roache
, P. J.
, 1997, “Quantification of Uncertainty in Computational Fluid Dynamics
,” Annu. Rev. Fluid Mech.
, 29
, pp. 123
–160
.10.
Eça
, L.
, and Hoekstra
, M.
, 2009, “Evaluation of Numerical Error Estimation Based on Grid Refinements Studies with the Method of the Manufactured Solutions
,” Comput. Fluids
, 38
, pp. 1580
–1591
.11.
Celik
, I. B.
, Ghia
, U.
, Roache
, P. J.
, Freitas
, C. J.
, Coleman
, H.
, and Raad
, P. E.
, 2008, “Procedure for Estimation and Reporting of Uncertainty Due to Discretization in CFD Applications
,” ASME J. Fluids Eng.
, 130
, pp. 078001
-1
.12.
Richardson
, L. F.
, 1910, “The Approximate Arithmetical Solution by Finite Differences of Physical Problems Involving Differential Equations, With Application to the Stresses in a Masonary Dam
”, Philos. Trans. R. Soc. London, Ser A.
, 210
, pp. 307
–357
.13.
Roache
, P. J.
, 1993, “A Method for Uniform Reporting of Grid Refinements Studies
,” Proceedings of the Quantification of Uncertainty in Computation Fluid Dynamics, ASME Fluids Engineering Division Spring Meeting
, Washington, DC
, June 23–24, I. B.
Celik
, ed., ASME Publ. No. FED–158.14.
Wilcox
, D. C.
, 2003, Turbulence Modelling for CFD
, 2nd ed., DCW Industries
La Cañada, California
.15.
Fluent INC, 2006, “Fluent 6.3 Users Guide,” http://www.fluent.comhttp://www.fluent.com
Copyright © 2011
by American Society of Mechanical Engineers
You do not currently have access to this content.
