Real-time monitoring of pressure and flow in multiphase flow applications is a critical problem given its economic and safety impacts. Using physics-based models has long been computationally expensive due to the spatial–temporal dependency of the variables and the nonlinear nature of the governing equations. This paper proposes a new reduced-order modeling approach for transient gas–liquid flow in pipes. In the proposed approach, artificial neural networks (ANNs) are considered to predict holdup and pressure drop at steady-state from which properties of the two-phase mixture are derived. The dynamic response of the mixture is then estimated using a dissipative distributed-parameter model. The proposed approach encompasses all pipe inclination angles and flow conditions, does not require a spatial discretization of the pipe, and is numerically stable. To validate our model, we compared its dynamic response to that of OLGA©, the leading multiphase flow dynamic simulator. The obtained results showed a good agreement between both models under different pipe inclinations and various levels of gas volume fractions (GVF). In addition, the proposed model reduced the computational time by four- to sixfolds compared to OLGA©. The above attribute makes it ideal for real-time monitoring and fluid flow control applications.
Skip Nav Destination
Article navigation
October 2019
Research-Article
A Generalized Reduced-Order Dynamic Model for Two-Phase Flow in Pipes
Majdi Chaari,
Majdi Chaari
Department of Electrical and
Computer Engineering,
University of Louisiana at Lafayette,
P.O. Box 43890,
Lafayette, LA 70504-3890
e-mail: Mxc0798@louisiana.edu
Computer Engineering,
University of Louisiana at Lafayette,
P.O. Box 43890,
Lafayette, LA 70504-3890
e-mail: Mxc0798@louisiana.edu
1Corresponding author.
Search for other works by this author on:
Afef Fekih,
Afef Fekih
Department of Electrical and
Computer Engineering,
University of Louisiana at Lafayette,
Lafayette, LA 70504-3890
e-mail: afef.fekih@louisiana.edu
Computer Engineering,
University of Louisiana at Lafayette,
P.O. Box 43890
,Lafayette, LA 70504-3890
e-mail: afef.fekih@louisiana.edu
Search for other works by this author on:
Abdennour C. Seibi,
Abdennour C. Seibi
Mem. ASME
Department of Petroleum Engineering,
University of Louisiana at Lafayette,
Lafayette, LA 70504
e-mail: Acs9955@louisiana.edu
Department of Petroleum Engineering,
University of Louisiana at Lafayette,
P.O. Box 44690
,Lafayette, LA 70504
e-mail: Acs9955@louisiana.edu
Search for other works by this author on:
Jalel Ben Hmida
Jalel Ben Hmida
Mem. ASME
Department of Mechanical Engineering,
University of Louisiana at Lafayette,
Lafayette, LA 70504
e-mail: Jxb9360@louisiana.edu
Department of Mechanical Engineering,
University of Louisiana at Lafayette,
P.O. Box 43678
,Lafayette, LA 70504
e-mail: Jxb9360@louisiana.edu
Search for other works by this author on:
Majdi Chaari
Department of Electrical and
Computer Engineering,
University of Louisiana at Lafayette,
P.O. Box 43890,
Lafayette, LA 70504-3890
e-mail: Mxc0798@louisiana.edu
Computer Engineering,
University of Louisiana at Lafayette,
P.O. Box 43890,
Lafayette, LA 70504-3890
e-mail: Mxc0798@louisiana.edu
Afef Fekih
Department of Electrical and
Computer Engineering,
University of Louisiana at Lafayette,
Lafayette, LA 70504-3890
e-mail: afef.fekih@louisiana.edu
Computer Engineering,
University of Louisiana at Lafayette,
P.O. Box 43890
,Lafayette, LA 70504-3890
e-mail: afef.fekih@louisiana.edu
Abdennour C. Seibi
Mem. ASME
Department of Petroleum Engineering,
University of Louisiana at Lafayette,
Lafayette, LA 70504
e-mail: Acs9955@louisiana.edu
Department of Petroleum Engineering,
University of Louisiana at Lafayette,
P.O. Box 44690
,Lafayette, LA 70504
e-mail: Acs9955@louisiana.edu
Jalel Ben Hmida
Mem. ASME
Department of Mechanical Engineering,
University of Louisiana at Lafayette,
Lafayette, LA 70504
e-mail: Jxb9360@louisiana.edu
Department of Mechanical Engineering,
University of Louisiana at Lafayette,
P.O. Box 43678
,Lafayette, LA 70504
e-mail: Jxb9360@louisiana.edu
1Corresponding author.
Contributed by the Fluids Engineering Division of ASME for publication in the JOURNAL OF FLUIDS ENGINEERING. Manuscript received December 30, 2018; final manuscript received May 19, 2019; published online June 20, 2019. Assoc. Editor: Riccardo Mereu.
J. Fluids Eng. Oct 2019, 141(10): 101303 (18 pages)
Published Online: June 20, 2019
Article history
Received:
December 30, 2018
Revised:
May 19, 2019
Citation
Chaari, M., Fekih, A., Seibi, A. C., and Ben Hmida, J. (June 20, 2019). "A Generalized Reduced-Order Dynamic Model for Two-Phase Flow in Pipes." ASME. J. Fluids Eng. October 2019; 141(10): 101303. https://doi.org/10.1115/1.4043858
Download citation file:
Get Email Alerts
Cited By
Related Articles
Low-Dimensional Modeling of Transient Two-Phase Flow in Pipelines
J. Dyn. Sys., Meas., Control (October,2016)
Modeling of Pig Assisted Production Methods
J. Energy Resour. Technol (March,2002)
A Novel Approach for the Prediction of Dynamic Features of Air Release and Absorption in Hydraulic Oils
J. Fluids Eng (September,2013)
On Fluid Compressibility in Switch-Mode Hydraulic Circuits—Part I: Modeling and Analysis
J. Dyn. Sys., Meas., Control (March,2013)
Related Proceedings Papers
Related Chapters
A Review on Prediction over Pressured Zone in Hydrocarbon Well Using Seismic Travel Time through Artificial Intelligence Technique for Pre-Drilling Planing
International Conference on Software Technology and Engineering, 3rd (ICSTE 2011)
Estimating Resilient Modulus Using Neural Network Models
Intelligent Engineering Systems Through Artificial Neural Networks, Volume 17
Dynamic Behavior of Pumping Systems
Pipeline Pumping and Compression Systems: A Practical Approach