Skip Nav Destination
Issues
August 1935
This article was originally published in
Transactions of the American Society of Mechanical Engineers
ISSN 0097-6822
In this Issue
Research Papers
Photoflow Method of Water Measurement
Trans. ASME. August 1935, 57(6): 273–280.
doi: https://doi.org/10.1115/1.4020010
Topics:
Water
,
Flow (Dynamics)
,
Errors
,
Pressure
,
Flowmeters
,
Instrumentation
,
Photography
Pitot-Tube Practice
Trans. ASME. August 1935, 57(6): 281–294.
doi: https://doi.org/10.1115/1.4020011
Topics:
Flowmeters
,
Flow (Dynamics)
,
Pipelines
,
Pipes
,
Cycles
,
Water
,
Calibration
,
Design
,
Errors
,
Flow measurement
Research Investigation of Current-Meter Behavior in Flowing Water
Trans. ASME. August 1935, 57(6): 295–301.
doi: https://doi.org/10.1115/1.4020012
Topics:
Construction
,
Flow (Dynamics)
,
Flow measurement
,
Flowmeters
,
Flumes
,
Water
Water Gaging for Low-Head Units of High Capacity
Trans. ASME. August 1935, 57(6): 303–316.
doi: https://doi.org/10.1115/1.4020013
Topics:
Gages
,
Water
,
Testing
,
Engineers
,
Flow (Dynamics)
,
Atlantic Ocean
,
Design
,
Flow measurement
,
Hydroelectric construction
,
Preferences
Draft-Gear Action in Long Trains
Trans. ASME. August 1935, 57(6): 317–334.
doi: https://doi.org/10.1115/1.4020014
Topics:
Gears
,
Trains
,
Design
,
Freight cars
,
Particulate matter
,
Pressure
,
Waves
Locomotive Tractive Effort in Relation to Speed and Steam Supply
Trans. ASME. August 1935, 57(6): 335–341.
doi: https://doi.org/10.1115/1.4020015
Topics:
Locomotives
,
Steam
,
Horsepower
,
Boilers
,
Cylinders
,
Economics
,
Pressure
,
Weight (Mass)
Discussions and Closures
Discussion: “The Design and Performance of an Axial-Flow Fan” (Marks, Lionel S., and Weske, John R., 1934, Trans. ASME, 56, pp. 807–813)
Trans. ASME. August 1935, 57(6): 343–344.
doi: https://doi.org/10.1115/1.4020016
Topics:
Axial flow
,
Design
Discussion: “The Design and Performance of an Axial-Flow Fan” (Marks, Lionel S., and Weske, John R., 1934, Trans. ASME, 56, pp. 807–813)
Trans. ASME. August 1935, 57(6): 344–345.
doi: https://doi.org/10.1115/1.4020017
Topics:
Axial flow
,
Design
Discussion: “The Design and Performance of an Axial-Flow Fan” (Marks, Lionel S., and Weske, John R., 1934, Trans. ASME, 56, pp. 807–813)
Trans. ASME. August 1935, 57(6): 345–346.
doi: https://doi.org/10.1115/1.4020018
Topics:
Axial flow
,
Design
Closure to “Discussions of ‘The Design and Performance of an Axial-Flow Fan’” (1935, Trans. ASME, 57, pp. 343–346)
Trans. ASME. August 1935, 57(6): 346.
doi: https://doi.org/10.1115/1.4020019
Topics:
Axial flow
,
Design
Discussion: “Air Flow in Fan-Discharge Ducts” (Marks, L. S., 1934, Trans. ASME, 56, pp. 871–878)
Trans. ASME. August 1935, 57(6): 346–347.
doi: https://doi.org/10.1115/1.4020020
Discussion: “Air Flow in Fan-Discharge Ducts” (Marks, L. S., 1934, Trans. ASME, 56, pp. 871–878)
Trans. ASME. August 1935, 57(6): 347.
doi: https://doi.org/10.1115/1.4020021
Discussion: “Air Flow in Fan-Discharge Ducts” (Marks, L. S., 1934, Trans. ASME, 56, pp. 871–878)
Trans. ASME. August 1935, 57(6): 347–348.
doi: https://doi.org/10.1115/1.4020022
Discussion: “Air Flow in Fan-Discharge Ducts” (Marks, L. S., 1934, Trans. ASME, 56, pp. 871–878)
Trans. ASME. August 1935, 57(6): 348–349.
doi: https://doi.org/10.1115/1.4020023
Discussion: “Air Flow in Fan-Discharge Ducts” (Marks, L. S., 1934, Trans. ASME, 56, pp. 871–878)
Trans. ASME. August 1935, 57(6): 349.
doi: https://doi.org/10.1115/1.4020024
Discussion: “Air Flow in Fan-Discharge Ducts” (Marks, L. S., 1934, Trans. ASME, 56, pp. 871–878)
Trans. ASME. August 1935, 57(6): 349.
doi: https://doi.org/10.1115/1.4020025
Discussion: “Air Flow in Fan-Discharge Ducts” (Marks, L. S., 1934, Trans. ASME, 56, pp. 871–878)
Trans. ASME. August 1935, 57(6): 350.
doi: https://doi.org/10.1115/1.4020026
Closure to “Discussions of ‘Air Flow in Fan-Discharge Ducts’” (1935, Trans. ASME, 57, pp. 346–350)
Trans. ASME. August 1935, 57(6): 350–351.
doi: https://doi.org/10.1115/1.4020027
Topics:
Air flow
Discussion: “The Economics of Preheated Air for Stokers” (Dillon, R. E., and Engle, M. D., 1934, Trans. ASME, 56, pp. 879–884)
Trans. ASME. August 1935, 57(6): 351–352.
doi: https://doi.org/10.1115/1.4020028
Topics:
Economics
Discussion: “The Economics of Preheated Air for Stokers” (Dillon, R. E., and Engle, M. D., 1934, Trans. ASME, 56, pp. 879–884)
Trans. ASME. August 1935, 57(6): 352–353.
doi: https://doi.org/10.1115/1.4020029
Topics:
Economics
Discussion: “The Economics of Preheated Air for Stokers” (Dillon, R. E., and Engle, M. D., 1934, Trans. ASME, 56, pp. 879–884)
Trans. ASME. August 1935, 57(6): 353.
doi: https://doi.org/10.1115/1.4020030
Topics:
Economics
Discussion: “The Economics of Preheated Air for Stokers” (Dillon, R. E., and Engle, M. D., 1934, Trans. ASME, 56, pp. 879–884)
Trans. ASME. August 1935, 57(6): 353.
doi: https://doi.org/10.1115/1.4020031
Topics:
Economics
Discussion: “The Economics of Preheated Air for Stokers” (Dillon, R. E., and Engle, M. D., 1934, Trans. ASME, 56, pp. 879–884)
Trans. ASME. August 1935, 57(6): 353–354.
doi: https://doi.org/10.1115/1.4020032
Topics:
Economics
Discussion: “The Economics of Preheated Air for Stokers” (Dillon, R. E., and Engle, M. D., 1934, Trans. ASME, 56, pp. 879–884)
Trans. ASME. August 1935, 57(6): 354.
doi: https://doi.org/10.1115/1.4020033
Topics:
Economics
Discussion: “The Economics of Preheated Air for Stokers” (Dillon, R. E., and Engle, M. D., 1934, Trans. ASME, 56, pp. 879–884)
Trans. ASME. August 1935, 57(6): 354.
doi: https://doi.org/10.1115/1.4020034
Topics:
Economics
Discussion: “The Economics of Preheated Air for Stokers” (Dillon, R. E., and Engle, M. D., 1934, Trans. ASME, 56, pp. 879–884)
Trans. ASME. August 1935, 57(6): 354.
doi: https://doi.org/10.1115/1.4020035
Topics:
Economics
Discussion: “The Economics of Preheated Air for Stokers” (Dillon, R. E., and Engle, M. D., 1934, Trans. ASME, 56, pp. 879–884)
Trans. ASME. August 1935, 57(6): 355.
doi: https://doi.org/10.1115/1.4020036
Topics:
Economics
Discussion: “The Economics of Preheated Air for Stokers” (Dillon, R. E., and Engle, M. D., 1934, Trans. ASME, 56, pp. 879–884)
Trans. ASME. August 1935, 57(6): 355.
doi: https://doi.org/10.1115/1.4020037
Topics:
Economics
Discussion: “Current Practice in Pressures, Speeds, Clearances, and Lubrication of Oil-Film Bearings” (Howarth, H. A. S., 1934, Trans. ASME, 56, pp. 891–902)
Trans. ASME. August 1935, 57(6): 355.
doi: https://doi.org/10.1115/1.4020038
Topics:
Bearings
,
Lubrication
Discussion: “Current Practice in Pressures, Speeds, Clearances, and Lubrication of Oil-Film Bearings” (Howarth, H. A. S., 1934, Trans. ASME, 56, pp. 891–902)
Trans. ASME. August 1935, 57(6): 355–356.
doi: https://doi.org/10.1115/1.4020039
Topics:
Bearings
,
Lubrication
Discussion: “Current Practice in Pressures, Speeds, Clearances, and Lubrication of Oil-Film Bearings” (Howarth, H. A. S., 1934, Trans. ASME, 56, pp. 891–902)
Trans. ASME. August 1935, 57(6): 356–357.
doi: https://doi.org/10.1115/1.4020040
Topics:
Bearings
,
Lubrication
Discussion: “Current Practice in Pressures, Speeds, Clearances, and Lubrication of Oil-Film Bearings” (Howarth, H. A. S., 1934, Trans. ASME, 56, pp. 891–902)
Trans. ASME. August 1935, 57(6): 357.
doi: https://doi.org/10.1115/1.4020041
Topics:
Bearings
,
Lubrication
Discussion: “Current Practice in Pressures, Speeds, Clearances, and Lubrication of Oil-Film Bearings” (Howarth, H. A. S., 1934, Trans. ASME, 56, pp. 891–902)
Trans. ASME. August 1935, 57(6): 357–358.
doi: https://doi.org/10.1115/1.4020042
Topics:
Bearings
,
Lubrication
Discussion: “Current Practice in Pressures, Speeds, Clearances, and Lubrication of Oil-Film Bearings” (Howarth, H. A. S., 1934, Trans. ASME, 56, pp. 891–902)
Trans. ASME. August 1935, 57(6): 358–359.
doi: https://doi.org/10.1115/1.4020043
Topics:
Bearings
,
Lubrication
Discussion: “Current Practice in Pressures, Speeds, Clearances, and Lubrication of Oil-Film Bearings” (Howarth, H. A. S., 1934, Trans. ASME, 56, pp. 891–902)
Trans. ASME. August 1935, 57(6): 359.
doi: https://doi.org/10.1115/1.4020044
Topics:
Bearings
,
Lubrication
Discussion: “Current Practice in Pressures, Speeds, Clearances, and Lubrication of Oil-Film Bearings” (Howarth, H. A. S., 1934, Trans. ASME, 56, pp. 891–902)
Trans. ASME. August 1935, 57(6): 359–360.
doi: https://doi.org/10.1115/1.4020045
Topics:
Bearings
,
Lubrication
Discussion: “Current Practice in Pressures, Speeds, Clearances, and Lubrication of Oil-Film Bearings” (Howarth, H. A. S., 1934, Trans. ASME, 56, pp. 891–902)
Trans. ASME. August 1935, 57(6): 360.
doi: https://doi.org/10.1115/1.4020046
Topics:
Bearings
,
Lubrication
Closure to “Discussions of ‘Current Practice in Pressures, Speeds, Clearances, and Lubrication of Oil-Film Bearings’” (1935, Trans. ASME, 57, pp. 355–360)
Trans. ASME. August 1935, 57(6): 360–362.
doi: https://doi.org/10.1115/1.4020047
Topics:
Lubrication
Discussion: “Tractive Effort of Steam Locomotives (Locomotive Ratios—II)” (Lipetz, A. I., 1934, Trans. ASME, 56, pp. 923–933)
Trans. ASME. August 1935, 57(6): 362–364.
doi: https://doi.org/10.1115/1.4020048
Topics:
Locomotives
,
Steam
Discussion: “Tractive Effort of Steam Locomotives (Locomotive Ratios—II)” (Lipetz, A. I., 1934, Trans. ASME, 56, pp. 923–933)
Trans. ASME. August 1935, 57(6): 364–366.
doi: https://doi.org/10.1115/1.4020049
Topics:
Locomotives
,
Steam
Discussion: “Tractive Effort of Steam Locomotives (Locomotive Ratios—II)” (Lipetz, A. I., 1934, Trans. ASME, 56, pp. 923–933)
Trans. ASME. August 1935, 57(6): 366.
doi: https://doi.org/10.1115/1.4020050
Topics:
Locomotives
,
Steam
Discussion: “Tractive Effort of Steam Locomotives (Locomotive Ratios—II)” (Lipetz, A. I., 1934, Trans. ASME, 56, pp. 923–933)
Trans. ASME. August 1935, 57(6): 366–367.
doi: https://doi.org/10.1115/1.4020051
Topics:
Locomotives
,
Steam
Discussion: “Tractive Effort of Steam Locomotives (Locomotive Ratios—II)” (Lipetz, A. I., 1934, Trans. ASME, 56, pp. 923–933)
Trans. ASME. August 1935, 57(6): 367–368.
doi: https://doi.org/10.1115/1.4020052
Topics:
Locomotives
,
Steam
Closure to “Discussions of ‘Tractive Effort of Steam Locomotives (Locomotive Ratios—II)’” (1935, Trans. ASME, 57, pp. 362–368)
Trans. ASME. August 1935, 57(6): 368–374.
doi: https://doi.org/10.1115/1.4020053
Topics:
Locomotives
,
Steam
Discussion: “The Intake Orifice and a Proposed Method for Testing Exhaust Fans” (Ebaugh, N. C., and Whitfield, R., 1934, Trans. ASME, 56, pp. 903–911)
Trans. ASME. August 1935, 57(6): 374.
doi: https://doi.org/10.1115/1.4020054
Topics:
Exhaust systems
,
Fans
,
Testing
Closure to “Discussion of ‘The Intake Orifice and a Proposed Method for Testing Exhaust Fans’” (1935, Trans. ASME, 57, p. 374)
Trans. ASME. August 1935, 57(6): 374.
doi: https://doi.org/10.1115/1.4020055
Topics:
Exhaust systems
,
Testing
Discussion: “Pulverized Fuel-Burning Experiences at Buzzard Point Station” (Thielscher, H. G., 1934, Trans. ASME, 56, pp. 885–890)
Trans. ASME. August 1935, 57(6): 374–375.
doi: https://doi.org/10.1115/1.4020056
Topics:
Combustion
,
Fuels
Discussion: “Pulverized Fuel-Burning Experiences at Buzzard Point Station” (Thielscher, H. G., 1934, Trans. ASME, 56, pp. 885–890)
Trans. ASME. August 1935, 57(6): 375.
doi: https://doi.org/10.1115/1.4020057
Topics:
Combustion
,
Fuels
Discussion: “Pulverized Fuel-Burning Experiences at Buzzard Point Station” (Thielscher, H. G., 1934, Trans. ASME, 56, pp. 885–890)
Trans. ASME. August 1935, 57(6): 375–376.
doi: https://doi.org/10.1115/1.4020058
Topics:
Combustion
,
Fuels
Discussion: “Pulverized Fuel-Burning Experiences at Buzzard Point Station” (Thielscher, H. G., 1934, Trans. ASME, 56, pp. 885–890)
Trans. ASME. August 1935, 57(6): 376.
doi: https://doi.org/10.1115/1.4020059
Topics:
Combustion
,
Fuels
Discussion: “Ten Years of Stoker Development at Hudson Avenue” (Driscoll, J. M., and Sperr, W. H., 1935, Trans. ASME, 57, pp. 49–58)
Trans. ASME. August 1935, 57(6): 376–377.
doi: https://doi.org/10.1115/1.4020060
Discussion: “Ten Years of Stoker Development at Hudson Avenue” (Driscoll, J. M., and Sperr, W. H., 1935, Trans. ASME, 57, pp. 49–58)
Trans. ASME. August 1935, 57(6): 377–378.
doi: https://doi.org/10.1115/1.4020061
Discussion: “Ten Years of Stoker Development at Hudson Avenue” (Driscoll, J. M., and Sperr, W. H., 1935, Trans. ASME, 57, pp. 49–58)
Trans. ASME. August 1935, 57(6): 378.
doi: https://doi.org/10.1115/1.4020062
Discussion: “Ten Years of Stoker Development at Hudson Avenue” (Driscoll, J. M., and Sperr, W. H., 1935, Trans. ASME, 57, pp. 49–58)
Trans. ASME. August 1935, 57(6): 378.
doi: https://doi.org/10.1115/1.4020063
Discussion: “Ten Years of Stoker Development at Hudson Avenue” (Driscoll, J. M., and Sperr, W. H., 1935, Trans. ASME, 57, pp. 49–58)
Trans. ASME. August 1935, 57(6): 378–379.
doi: https://doi.org/10.1115/1.4020064
Closure to “Discussions of ‘Ten Years of Stoker Development at Hudson Avenue’” (1935, Trans. ASME, 57, pp. 376–379)
Trans. ASME. August 1935, 57(6): 379–380.
doi: https://doi.org/10.1115/1.4020065
Discussion: “A New Method of Investigating Performance of Bearing Metals” (Connelly, John R., 1935, Trans. ASME, 57, pp. 35–39)
Trans. ASME. August 1935, 57(6): 380.
doi: https://doi.org/10.1115/1.4020066
Topics:
Babbitt metal
Discussion: “A New Method of Investigating Performance of Bearing Metals” (Connelly, John R., 1935, Trans. ASME, 57, pp. 35–39)
Trans. ASME. August 1935, 57(6): 380–381.
doi: https://doi.org/10.1115/1.4020067
Topics:
Babbitt metal
Closure to “Discussions of ‘A New Method of Investigating Performance of Bearing Metals’” (1935, Trans. ASME, 57, pp. 380–381)
Trans. ASME. August 1935, 57(6): 381.
doi: https://doi.org/10.1115/1.4020068
Topics:
Bearings
