This paper presents numerical simulation results of the primary atomization of a turbulent liquid jet injected into a gaseous crossflow. Simulations are performed using the balanced force refined level set grid method. The phase interface during the initial breakup phase is tracked by a level set method on a separate refined grid. A balanced force finite volume algorithm together with an interface projected curvature evaluation is used to ensure the stable and accurate treatment of surface tension forces even on small scales. Broken off, small scale nearly spherical drops are transferred into a Lagrangian point particle description allowing for full two-way coupling and continued secondary atomization. The numerical method is applied to the simulation of the primary atomization region of a turbulent liquid jet injected into a gaseous crossflow , analyzed experimentally by Brown and McDonell (2006, “Near Field Behavior of a Liquid Jet in a Crossflow,” ILASS Americas, 19th Annual Conference on Liquid Atomization and Spray Systems). The simulations take the actual geometry of the injector into account. Grid converged simulation results of the jet penetration agree well with experimentally obtained correlations. Both column/bag breakup and shear/ligament breakup modes can be observed on the liquid jet. A grid refinement study shows that on the finest employed grids (flow solver 64 points per injector diameter, level set solver 128 points per injector diameter), grid converged drop sizes are achieved for drops as small as one-hundredth the size of the injector diameter.
Skip Nav Destination
e-mail: marcus.herrmann@asu.edu
Article navigation
June 2010
Research Papers
Detailed Numerical Simulations of the Primary Atomization of a Turbulent Liquid Jet in Crossflow
Marcus Herrmann
Marcus Herrmann
Department of Mechanical and Aerospace Engineering,
e-mail: marcus.herrmann@asu.edu
Arizona State University
, Tempe, AZ 85287
Search for other works by this author on:
Marcus Herrmann
Department of Mechanical and Aerospace Engineering,
Arizona State University
, Tempe, AZ 85287e-mail: marcus.herrmann@asu.edu
J. Eng. Gas Turbines Power. Jun 2010, 132(6): 061506 (10 pages)
Published Online: March 30, 2010
Article history
Received:
May 5, 2009
Revised:
May 6, 2009
Published:
March 30, 2010
Citation
Herrmann, M. (March 30, 2010). "Detailed Numerical Simulations of the Primary Atomization of a Turbulent Liquid Jet in Crossflow." ASME. J. Eng. Gas Turbines Power. June 2010; 132(6): 061506. https://doi.org/10.1115/1.4000148
Download citation file:
Get Email Alerts
Shape Optimization of an Industrial Aeroengine Combustor to reduce Thermoacoustic Instability
J. Eng. Gas Turbines Power
Dynamic Response of A Pivot-Mounted Squeeze Film Damper: Measurements and Predictions
J. Eng. Gas Turbines Power
Review of The Impact Of Hydrogen-Containing Fuels On Gas Turbine Hot-Section Materials
J. Eng. Gas Turbines Power
Effects of Lattice Orientation Angle On Tpms-Based Transpiration Cooling
J. Eng. Gas Turbines Power
Related Articles
Discussion: “Turbulent Gas Injections” (Ouellette, P., and Hill, P. G., 2000, ASME J. Fluids Eng., 122, pp. 743–752)
J. Fluids Eng (December,2000)
Modeling Wall Film Formation and Breakup Using an Integrated Interface-Tracking/Discrete-Phase Approach
J. Eng. Gas Turbines Power (March,2011)
Turbulent Transient Gas Injections
J. Fluids Eng (December,2000)
The Impact of Density Ratio on the Liquid Core Dynamics of a Turbulent Liquid Jet Injected Into a Crossflow
J. Eng. Gas Turbines Power (June,2011)
Related Chapters
Internal and Near Nozzle Flow Simulations of Gasoline Multi-Hole Injector (ECN Spray G) with Transient Needle Motion
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Antilock-Braking System Using Fuzzy Logic
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3
CFD Simulations of a Mixed-flow Pump Using Various Turbulence Models
Mixed-flow Pumps: Modeling, Simulation, and Measurements