In this study, an investigation was carried out to clarify the mechanism of countercurrent flow limitation (CCFL) or flooding, that is, limitations in the falling water mass flux in countercurrent two-phase flow in vertical channels, and to identify the effects of predominant parameters regarding CCFL, adopting the criterion that the CCFL condition be given by an envelope of momentum equation applied for the entire length of the channel with respect to any void fraction. As a result, it was found that the analytical model proposed could adequately predict all existing experimental results investigated in this study. In the channel configuration, circular, rectangular, and annular or planar channels, channel dimensions of diameter, gap size, width or circumference, and length, interfacial and wall friction, water injection mode, and inlet water subcooling were dominant parameters. Therefore, both the mechanism and the quantitative effects of CCFL have been identified.
Skip Nav Destination
Article navigation
Research Papers
Mechanism and Effects of Predominant Parameters Regarding Limitation of Falling Water in Vertical Countercurrent Two-Phase Flow
Y. Sudo
Y. Sudo
Department of High Temperature Engineering, Tokai Research Establishment, Japan Atomic Energy Research Institute (JAERI), 2-4 Shirakata-Shirane, Tokai-mura, Naka-gun, Ibaraki-ken 319-11 Japan
Search for other works by this author on:
Y. Sudo
Department of High Temperature Engineering, Tokai Research Establishment, Japan Atomic Energy Research Institute (JAERI), 2-4 Shirakata-Shirane, Tokai-mura, Naka-gun, Ibaraki-ken 319-11 Japan
J. Heat Transfer. Aug 1996, 118(3): 715-724 (10 pages)
Published Online: August 1, 1996
Article history
Received:
November 7, 1995
Revised:
May 15, 1996
Online:
December 5, 2007
Citation
Sudo, Y. (August 1, 1996). "Mechanism and Effects of Predominant Parameters Regarding Limitation of Falling Water in Vertical Countercurrent Two-Phase Flow." ASME. J. Heat Transfer. August 1996; 118(3): 715–724. https://doi.org/10.1115/1.2822691
Download citation file:
Get Email Alerts
Cited By
Effect of Rib Blockage Ratio and Arrangements on Impingement Heat Transfer in Double-Wall Cooling
J. Heat Mass Transfer (September 2023)
Numerical Simulation of Mixed Convection Cooling of Electronic Component Within a Lid-Driven Cubic Cavity Filled With Nanofluid
J. Heat Mass Transfer (September 2023)
Experimental Analysis of the Influential Factors on Mixed Convection Flow in Horizontal Pipes
J. Heat Mass Transfer (September 2023)
The Effect of Biot Number on a Generalized Heat Conduction Solution
J. Heat Mass Transfer
Related Articles
Interfacial Heat Transfer Between Steam Bubbles and Subcooled Water in Vertical Upward Flow
J. Heat Transfer (May,1995)
Critical Two-Phase Flow in Pipes for Subcooled Stagnation States With a Cavity Flooding Incipient Flashing Model
J. Heat Transfer (November,1990)
Two-Phase Heat Dissipation Utilizing Porous-Channels of High-Conductivity Material
J. Heat Transfer (February,1998)
Low-Velocity Subcooled Nucleate Flow Boiling at Various Orientations
J. Heat Transfer (May,1995)
Related Proceedings Papers
Related Chapters
Laminar Fluid Flow and Heat Transfer
Applications of Mathematical Heat Transfer and Fluid Flow Models in Engineering and Medicine
Corrosion in Injection Systems
Corrosion and Materials in Hydrocarbon Production: A Compendium of Operational and Engineering Aspects
Completing the Picture
Air Engines: The History, Science, and Reality of the Perfect Engine