A trigger probe measurement system and measurement methodology are developed for kinematic self-calibration of micro/meso-scale machine tools (mMTs). The trigger probe detects the contact between a spindle-mounted stylus and a table-mounted planar artifact. The trigger probe system is small enough to be easily mounted on an mMT. The measurement methodology is divided into off-machine and on-machine measurements. The off-machine measurements are only needed for the first calibration. Recalibration requires only the on-machine measurements to be repeated, thereby reducing recalibration time. The measurement system and methodology are implemented with existing kinematic modeling, error parameter estimation, and compensation techniques for the experimental calibration of a three-axis mMT. The measurement system error is evaluated and experimentally measured. Cutting tests are used to validate the performance of the calibration methodology.
Skip Nav Destination
e-mail: sgkapoor@uiuc.edu
Article navigation
Technical Papers
A Hybrid Methodology for Kinematic Calibration of Micro/Meso-Scale Machine Tools (mMTs)
Andrew Honegger,
Andrew Honegger
Graduate Research Assistant
Department of Mechanical and Industrial Engineering,
University of Illinois at Urbana-Champaign
, Urbana, IL 61801
Search for other works by this author on:
Shiv G. Kapoor,
Shiv G. Kapoor
Grayce Wicall Gauthier Chair in Mechanical and Industrial Engineering
Department of Mechanical and Industrial Engineering,
e-mail: sgkapoor@uiuc.edu
University of Illinois at Urbana-Champaign
, Urbana, IL 61801
Search for other works by this author on:
Richard E. DeVor
Richard E. DeVor
College of Engineering Distinguished Professor of Manufacturing
Department of Mechanical and Industrial Engineering,
University of Illinois at Urbana-Champaign
, Urbana, IL 61801
Search for other works by this author on:
Andrew Honegger
Graduate Research Assistant
Department of Mechanical and Industrial Engineering,
University of Illinois at Urbana-Champaign
, Urbana, IL 61801
Shiv G. Kapoor
Grayce Wicall Gauthier Chair in Mechanical and Industrial Engineering
Department of Mechanical and Industrial Engineering,
University of Illinois at Urbana-Champaign
, Urbana, IL 61801e-mail: sgkapoor@uiuc.edu
Richard E. DeVor
College of Engineering Distinguished Professor of Manufacturing
Department of Mechanical and Industrial Engineering,
University of Illinois at Urbana-Champaign
, Urbana, IL 61801J. Manuf. Sci. Eng. May 2006, 128(2): 513-522 (10 pages)
Published Online: November 1, 2005
Article history
Received:
May 24, 2005
Revised:
November 1, 2005
Citation
Honegger, A., Kapoor, S. G., and DeVor, R. E. (November 1, 2005). "A Hybrid Methodology for Kinematic Calibration of Micro/Meso-Scale Machine Tools (mMTs)." ASME. J. Manuf. Sci. Eng. May 2006; 128(2): 513–522. https://doi.org/10.1115/1.2162910
Download citation file:
Get Email Alerts
Related Articles
Development of a Six-Degree-of-Freedom Geometric Error Measurement System for a Meso-Scale Machine Tool
J. Manuf. Sci. Eng (November,2005)
Autonomous Calibration of Hexapod Machine Tools
J. Manuf. Sci. Eng (February,2000)
A Self-Calibration Method for Robotic Measurement System
J. Manuf. Sci. Eng (February,2000)
Turbine Efficiency
Measurement System for the QinetiQ Turbine Test
Facility
J. Turbomach (January,2010)
Related Chapters
An On-Machine Measurement System for Cylindricity Error
International Conference on Mechanical Engineering and Technology (ICMET-London 2011)
K-Models Clustering, a Generalization of K-Means Clustering
Intelligent Engineering Systems through Artificial Neural Networks, Volume 20
Accuracy-associated Models
Mechanics of Accuracy in Engineering Design of Machines and Robots Volume I: Nominal Functioning and Geometric Accuracy