The objective of this paper is to understand through parametric studies the effect of microstructural parameters, viz., the carbon nanotube (CNT) orientation with respect to the cutting direction, CNT loading, and level of dispersion within the matrix on the machinability of aligned CNT composites. To this end, a microstructure-based finite element machining model is used to simulate microstructures containing 1.5% and 6% by weight of CNTs. Microstructures with both uniform and nonuniform dispersions of CNTs are simulated. For each of these cases, CNTs having orientations of 0 deg, 45 deg, 90 deg, and 135 deg to the cutting direction are studied. The machining simulations were conducted using a positive rake tool. Chip morphology, cutting forces, surface roughness, and surface/subsurface damages are the machinability measures used for comparison. The results of the parametric studies demonstrate that the CNT orientation, loading, and level of dispersion all play a critical role in dictating the machining response of aligned composites. The results further indicate that the surface morphology of the machined surface can be harnessed to produce the next generation of microfluidic devices. This application demonstrates the feasibility of designing the microstructure of CNT composites by taking into account both their engineering functionality and machinability.
Skip Nav Destination
e-mail: jsamuel@illinois.edu
e-mail: sgkapoor@illinois.edu
e-mail: redevor@illinois.edu
e-mail: kjhsia@illinois.edu
Article navigation
October 2010
Research Papers
Effect of Microstructural Parameters on the Machinability of Aligned Carbon Nanotube Composites
Johnson Samuel,
Johnson Samuel
Post-Doctoral Research Associate
Department of Mechanical Science and Engineering,
e-mail: jsamuel@illinois.edu
University of Illinois, Urbana-Champaign
, Urbana, IL 61801
Search for other works by this author on:
Shiv G. Kapoor,
Shiv G. Kapoor
Professor
Department of Mechanical Science and Engineering,
e-mail: sgkapoor@illinois.edu
University of Illinois, Urbana-Champaign
, Urbana, IL 61801
Search for other works by this author on:
Richard E. DeVor,
Richard E. DeVor
Distinguished Professor of Manufacturing
Department of Mechanical Science and Engineering,
e-mail: redevor@illinois.edu
University of Illinois, Urbana-Champaign
, Urbana, IL 61801
Search for other works by this author on:
K. Jimmy Hsia
K. Jimmy Hsia
Professor
Department of Mechanical Science and Engineering,
e-mail: kjhsia@illinois.edu
University of Illinois, Urbana-Champaign
, Urbana, IL 61801
Search for other works by this author on:
Johnson Samuel
Post-Doctoral Research Associate
Department of Mechanical Science and Engineering,
University of Illinois, Urbana-Champaign
, Urbana, IL 61801e-mail: jsamuel@illinois.edu
Shiv G. Kapoor
Professor
Department of Mechanical Science and Engineering,
University of Illinois, Urbana-Champaign
, Urbana, IL 61801e-mail: sgkapoor@illinois.edu
Richard E. DeVor
Distinguished Professor of Manufacturing
Department of Mechanical Science and Engineering,
University of Illinois, Urbana-Champaign
, Urbana, IL 61801e-mail: redevor@illinois.edu
K. Jimmy Hsia
Professor
Department of Mechanical Science and Engineering,
University of Illinois, Urbana-Champaign
, Urbana, IL 61801e-mail: kjhsia@illinois.edu
J. Manuf. Sci. Eng. Oct 2010, 132(5): 051012 (9 pages)
Published Online: October 5, 2010
Article history
Received:
July 7, 2009
Revised:
August 13, 2010
Online:
October 5, 2010
Published:
October 5, 2010
Citation
Samuel, J., Kapoor, S. G., DeVor, R. E., and Hsia, K. J. (October 5, 2010). "Effect of Microstructural Parameters on the Machinability of Aligned Carbon Nanotube Composites." ASME. J. Manuf. Sci. Eng. October 2010; 132(5): 051012. https://doi.org/10.1115/1.4002495
Download citation file:
Get Email Alerts
Related Articles
Experimental Investigation of the Machinability of Polycarbonate Reinforced With Multiwalled Carbon Nanotubes
J. Manuf. Sci. Eng (May,2006)
Microstructure-Level Machining Simulation of Carbon Nanotube Reinforced Polymer Composites—Part II: Model Interpretation and Application
J. Manuf. Sci. Eng (June,2008)
Related Proceedings Papers
Related Chapters
Modeling of Cutting Force in Vibration-Assisted Machining
Vibration Assisted Machining: Theory, Modelling and Applications
Cutting and Machining
Fabrication of Metallic Pressure Vessels
Tensile Behavior of CNT-CF/PP Composite Obtained from Experimental and Numerical Modeling Methods
International Conference on Computer and Electrical Engineering 4th (ICCEE 2011)