Topics: Cutting , Fatigue , Finite element methods , Finite element model , Fracture (Materials) , Gears , Stress , Carbide cutting tools , Modeling , Manufacturing

Fatigue Fracture Investigation of Cemented Carbide Tools in Gear Hobbing, Part 2: The Effect of Cutting Parameters on the Level of Tool Stresses—A Quantitative Parametric Analysis

A. Antoniadis, Professor,, N. Vidakis, Teaching Fellow,, N. Bilalis, Assoc. Professor,

J. Manuf. Sci. Eng. November 2002, 124(4): 792–798. doi: https://doi.org/10.1115/1.1511173

Abstract

View articletitled, Fatigue Fracture Investigation of Cemented Carbide Tools in Gear Hobbing, Part 2: The Effect of Cutting Parameters on the Level of Tool Stresses—A Quantitative Parametric Analysis

Open the PDF for in another window

Topics: Cutting , Gears , Stress , Fatigue , Carbide cutting tools , Fracture (Materials) , Kinematics

Analysis of Sound Signal Generation Due to Flank Wear in Turning

Ming-Chyuan Lu, Graduate Student, Elijah Kannatey-Asibu,, Jr., Professor

J. Manuf. Sci. Eng. November 2002, 124(4): 799–808. doi: https://doi.org/10.1115/1.1511177

Abstract

View articletitled, Analysis of Sound Signal Generation Due to Flank Wear in Turning

Open the PDF for in another window

Topics: Cutting , Signals , Wear , Stiffness , Displacement , Vibration

An Experimental Study on Fatigue Life Variance, Residual Stress Variance, and Their Correlation of Face-Turned and Ground Ti 6Al-4V Samples

Xiaoping Yang, Mem. ASME,, C. Richard Liu, Professor, Fellow ASME,, A. F. Grandt, Professor,

J. Manuf. Sci. Eng. November 2002, 124(4): 809–819. doi: https://doi.org/10.1115/1.1511174

Abstract

View articletitled, An Experimental Study on Fatigue Life Variance, Residual Stress Variance, and Their Correlation of Face-Turned and Ground Ti 6Al-4V Samples

Open the PDF for in another window

Topics: Fatigue life , Stress , Machining , Fatigue , Cutting , Grinding

Machinability of Pearlitic Cast Iron With Cubic Boron Nitride (CBN) Cutting Tools

Jiancheng Liu, Kazuo Yamazaki, Hiroyuki Ueda, Norihiko Narutaki, Yasuo Yamane

J. Manuf. Sci. Eng. November 2002, 124(4): 820–832. doi: https://doi.org/10.1115/1.1511522

Abstract

View articletitled, Machinability of Pearlitic Cast Iron With Cubic Boron Nitride (CBN) Cutting Tools

Open the PDF for in another window

Topics: Cast iron , Cutting , Cutting tools , Machinability , Wear , Milling , Machining , Temperature

Modeling of Residual Stress in Grinding of Nodular Cast Iron

Guoxian Xiao, Robin Stevenson, Ihab M. Hanna, Scott A. Hucker

J. Manuf. Sci. Eng. November 2002, 124(4): 833–839. doi: https://doi.org/10.1115/1.1510519

Abstract

View articletitled, Modeling of Residual Stress in Grinding of Nodular Cast Iron

Open the PDF for in another window

Topics: Grinding , Stress , Temperature , Cycles

Machining Quality and Cost: Estimation and Tradeoffs

Panicos Nicolaou, Research Assistant, Deborah L. Thurston, Professor, James V. Carnahan, Adjunct Professor

J. Manuf. Sci. Eng. November 2002, 124(4): 840–851. doi: https://doi.org/10.1115/1.1511169

Abstract

View articletitled, Machining Quality and Cost: Estimation and Tradeoffs

Open the PDF for in another window

Topics: Casting , Cutting , Drilling , Fluids , Machining , Milling , Tradeoffs , Sewage

Hydrodynamic Physical Modeling of Laser Drilling

D. K. Y. Low, L. Li, P. J. Byrd

J. Manuf. Sci. Eng. November 2002, 124(4): 852–862. doi: https://doi.org/10.1115/1.1510518

Abstract

View articletitled, Hydrodynamic Physical Modeling of Laser Drilling

Open the PDF for in another window

Topics: Drilling , Lasers , Pressure , Temperature , Cooling , Forced convection

Modelling and Experimental Study Into the Laser Assisted Nitriding of Ti-6Al-4V Alloy

B. S. Yilbas, I. Z. Naqavi, S. Z. Shuja

J. Manuf. Sci. Eng. November 2002, 124(4): 863–874. doi: https://doi.org/10.1115/1.1511171

Abstract

View articletitled, Modelling and Experimental Study Into the Laser Assisted Nitriding of Ti-6Al-4V Alloy

Open the PDF for in another window

Topics: Alloys , Diffusion (Physics) , Heating , Lasers , Nitriding , Nitrogen , Temperature , Thermal stresses , Melting , Temperature gradient

Laser-Assisted Machining of Reaction Sintered Mullite Ceramics

Patrick A. Rebro, Yung C. Shin, Frank P. Incropera

J. Manuf. Sci. Eng. November 2002, 124(4): 875–885. doi: https://doi.org/10.1115/1.1511523

Abstract

View articletitled, Laser-Assisted Machining of Reaction Sintered Mullite Ceramics

Open the PDF for in another window

Topics: Ceramics , Cutting , Lasers , Machining , Temperature , Wear , Surface roughness , Brittle fracture

Distortion of Rectangular Tubes in Stretch Bending

Hong Zhu, Graduate Student, Kim A. Stelson, Professor

J. Manuf. Sci. Eng. November 2002, 124(4): 886–890. doi: https://doi.org/10.1115/1.1511170

Abstract

View articletitled, Distortion of Rectangular Tubes in Stretch Bending

Open the PDF for in another window

Topics: Deformation , Energy conservation , Flanges , Manufacturing , Pressure , Shapes

Time Series Control Charts in the Presence of Model Uncertainty

Daniel W. Apley, Assistant Professor, Mem., ASME

J. Manuf. Sci. Eng. November 2002, 124(4): 891–898. doi: https://doi.org/10.1115/1.1510520

Abstract

View articletitled, Time Series Control Charts in the Presence of Model Uncertainty

Open the PDF for in another window

Topics: Errors , Quality control charts , Time series , Uncertainty , Modeling , Design

A Grammar-Based Framework for Integrating Design and Manufacturing

Patrick Kwon, Assoc. Mem. ASME, Moon Jung Chung, Brian Pentland

J. Manuf. Sci. Eng. November 2002, 124(4): 899–907. doi: https://doi.org/10.1115/1.1511175

Abstract

View articletitled, A Grammar-Based Framework for Integrating Design and Manufacturing

Open the PDF for in another window

Topics: Design , Manufacturing , Flow (Dynamics)

Environmentally Benign Manufacturing: Trends in Europe, Japan, and the USA

Dave Allen, Diana Bauer, Bert Bras, Tim Gutowski, Cindy Murphy, Tom Piwonka, Paul Sheng, John Sutherland, Deborah Thurston, Egon Wolff

J. Manuf. Sci. Eng. November 2002, 124(4): 908–920. doi: https://doi.org/10.1115/1.1505855

Abstract

View articletitled, Environmentally Benign Manufacturing: Trends in Europe, Japan, and the USA

Open the PDF for in another window

Topics: Manufacturing , Metals , Polymers , Recycling , Governments

Technical Briefs

A Method for Measuring the Temperature Distribution Along the Cutting Edges of a Drill

Matthew Bono, Graduate Student, Jun Ni, Professor

J. Manuf. Sci. Eng. November 2002, 124(4): 921–923. doi: https://doi.org/10.1115/1.1511525

Abstract

View articletitled, A Method for Measuring the Temperature Distribution Along the Cutting Edges of a Drill

Open the PDF for in another window

Topics: Cutting , Drilling , Drills (Tools) , Temperature distribution , Thermocouples

A Data Mining Approach for Generation of Control Signatures

Andrew Kusiak, Professor

J. Manuf. Sci. Eng. November 2002, 124(4): 923–926. doi: https://doi.org/10.1115/1.1511524

Abstract

View articletitled, A Data Mining Approach for Generation of Control Signatures

Open the PDF for in another window

Topics: Algorithms , Data mining , Metalworking , Set theory , Process control , Manufacturing , Decision making , Product quality

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

Special Section: Manufacturing Science Engineering Conference 2024

J. Manuf. Sci. Eng (November 2024)

Anisotropy in Chip Formation in Orthogonal Cutting of Rolled Ti-6Al-4V

J. Manuf. Sci. Eng (January 2025)

Thermoacoustic Consolidation of Metal Particles for Energy-Efficient Metal Powders Recycling in Metal Additive Manufacturing

J. Manuf. Sci. Eng (February 2025)

Modeling and Experimental Investigation of Surface Generation in Diamond Micro-Chiseling

J. Manuf. Sci. Eng (February 2025)

Estimation of Temperature Rise in Magnetorheological Fluid-Based Finishing of Thin Substrate: A Theoretical and Experimental Study

J. Manuf. Sci. Eng (February 2025)

Technical Papers

A Model for Predicting the Heat Flow into the Workpiece in Dry Drilling

Drilling of Aramid and Carbon Fiber Polymer Composites

Fatigue Fracture Investigation of Cemented Carbide Tools in Gear Hobbing, Part 1: FEM Modeling of Fly Hobbing and Computational Interpretation of Experimental Results

Fatigue Fracture Investigation of Cemented Carbide Tools in Gear Hobbing, Part 2: The Effect of Cutting Parameters on the Level of Tool Stresses—A Quantitative Parametric Analysis

Analysis of Sound Signal Generation Due to Flank Wear in Turning

An Experimental Study on Fatigue Life Variance, Residual Stress Variance, and Their Correlation of Face-Turned and Ground Ti 6Al-4V Samples

Machinability of Pearlitic Cast Iron With Cubic Boron Nitride (CBN) Cutting Tools

Modeling of Residual Stress in Grinding of Nodular Cast Iron

Machining Quality and Cost: Estimation and Tradeoffs

Hydrodynamic Physical Modeling of Laser Drilling

Modelling and Experimental Study Into the Laser Assisted Nitriding of Ti-6Al-4V Alloy

Laser-Assisted Machining of Reaction Sintered Mullite Ceramics

Distortion of Rectangular Tubes in Stretch Bending

Time Series Control Charts in the Presence of Model Uncertainty

A Grammar-Based Framework for Integrating Design and Manufacturing

Environmentally Benign Manufacturing: Trends in Europe, Japan, and the USA

Technical Briefs

A Method for Measuring the Temperature Distribution Along the Cutting Edges of a Drill

A Data Mining Approach for Generation of Control Signatures

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Technical Papers

Technical Briefs

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only