Skip Nav Destination
Issues
November 1976
This article was originally published in
Journal of Engineering for Industry
ISSN 0022-0817
In this Issue
Research Papers
Metal Flow in Two-Die Swaging
J. Eng. Ind. November 1976, 98(4): 1121–1124.
doi: https://doi.org/10.1115/1.3439064
Topics:
Cold rolling
,
Flow (Dynamics)
,
Fracture (Materials)
,
Hardening
,
Metals
Attritious Wear of Silicon Carbide
J. Eng. Ind. November 1976, 98(4): 1125–1134.
doi: https://doi.org/10.1115/1.3439065
Topics:
Silicon
,
Wear
,
Metals
,
Atoms
,
Carbon
,
Diffusion (Physics)
,
Fracture (Materials)
,
Fracture (Process)
,
High temperature
,
Aluminum
Analysis of Flexible Rotor Whirl and Whip Using a Realistic Hydrodynamic Journal Bearing Model
J. Eng. Ind. November 1976, 98(4): 1135–1143.
doi: https://doi.org/10.1115/1.3439066
Topics:
Journal bearings
,
Rotors
,
Whirls
,
Bearings
,
Cavitation
,
Computer simulation
,
Damping
,
Disks
,
Fluid films
,
Geometry
Dynamic Stability of Timoshenko Beams by Finite Element Method
J. Eng. Ind. November 1976, 98(4): 1145–1149.
doi: https://doi.org/10.1115/1.3439069
Application of the Deformation Theory of Plasticity for Determining Elastoplastic Stress and Strain Concentration Factors
J. Eng. Ind. November 1976, 98(4): 1152–1156.
doi: https://doi.org/10.1115/1.3439072
Topics:
Deformation
,
Plasticity
,
Stress
,
Constitutive equations
,
Failure
,
Finite element analysis
,
Stiffness
,
Yield strength
Tubesheet Design in U-Tube Exchangers Including the Effect of Tube Rotational Restraint
J. Eng. Ind. November 1976, 98(4): 1157–1160.
doi: https://doi.org/10.1115/1.3439073
Topics:
Design
,
Pressure
,
Heat exchangers
,
Stiffness
Instabilities of an Asymmetric Rotor With Asymmetric Shaft Mounted on Symmetric Elastic Supports
J. Eng. Ind. November 1976, 98(4): 1161–1165.
doi: https://doi.org/10.1115/1.3439074
Topics:
Rotors
,
Inertia (Mechanics)
,
Stiffness
Failure Analysis of a Redundant Reeving Hoist
J. Eng. Ind. November 1976, 98(4): 1166–1169.
doi: https://doi.org/10.1115/1.3439075
Topics:
Design
,
Failure
,
Failure analysis
,
Hoists
,
Ropes
,
Strategic materials
,
Stress
,
Wire
Product Design Implications of New High-Speed Milling Techniques
J. Eng. Ind. November 1976, 98(4): 1170–1175.
doi: https://doi.org/10.1115/1.3439076
Topics:
Milling
,
Product design
,
Design
,
Machine tools
,
Design engineering
,
Manufacturing
,
Stability
,
Testing
A Singularity Approach to Circular Plates
J. Eng. Ind. November 1976, 98(4): 1176–1178.
doi: https://doi.org/10.1115/1.3439077
Topics:
Algebra
,
Computers
,
Deflection
,
Plates (structures)
,
Stress
Criteria for Evaluating Bolt Head Design
J. Eng. Ind. November 1976, 98(4): 1179–1182.
doi: https://doi.org/10.1115/1.3439078
Topics:
Design
,
Failure
,
Fasteners
,
Mechanical properties
,
Weight (Mass)
Methods for Improving the Knuckle Boom Capacity in Truck-Mounted Cranes
J. Eng. Ind. November 1976, 98(4): 1183–1187.
doi: https://doi.org/10.1115/1.3439079
Topics:
Truck mounted cranes
,
Linkages
,
Design
,
Hardware
Design Analysis of a Snap-Action Mechanism
J. Eng. Ind. November 1976, 98(4): 1188–1191.
doi: https://doi.org/10.1115/1.3439080
Topics:
Design
,
Displacement
,
Friction
,
Shapes
,
Springs
The Mechanical State of the Sublayer of a Surface Generated by Chip-Removal Process—Part 1: Cutting With a Sharp Tool
J. Eng. Ind. November 1976, 98(4): 1192–1199.
doi: https://doi.org/10.1115/1.3439081
Topics:
Cutting
,
Carbon
,
Density
,
Machining
,
Shear (Mechanics)
,
Size effect
,
Steel
,
Stress concentration
,
Temperature
,
Work hardening
The Mechanical State of the Sublayer of a Surface Generated by Chip-Removal Process—Part 2: Cutting With a Tool With Flank Wear
J. Eng. Ind. November 1976, 98(4): 1202–1208.
doi: https://doi.org/10.1115/1.3439085
Topics:
Cutting
,
Wear
,
Temperature effects
,
Density
,
Shear (Mechanics)
,
Stress
,
Stress concentration
,
Temperature
,
Work hardening
,
Yield strength
An Investigation of Computer Control of Machining Chatter
J. Eng. Ind. November 1976, 98(4): 1209–1213.
doi: https://doi.org/10.1115/1.3439086
Topics:
Chatter
,
Computer control
,
Computers
,
Modeling
,
Signals
,
Stochastic processes
,
Vibration
Oily Bilge Water Treatment With a Tubular Ultrafiltration System
J. Eng. Ind. November 1976, 98(4): 1215–1220.
doi: https://doi.org/10.1115/1.3439089
Topics:
Detergents
,
Enzymes
,
Fluids
,
Fuel oils
,
Lubricating oils
,
Membranes
,
Navy
,
Pollution
,
Pressure
,
Rivers
Hydrogen-Induced Cracking of Steels Under Wet Hydrogen Sulfide Environment
J. Eng. Ind. November 1976, 98(4): 1221–1230.
doi: https://doi.org/10.1115/1.3439090
Topics:
Hydrogen
,
Hydrogen embrittlement
,
Steel
,
Sulfur
,
Fracture (Materials)
,
Copper
,
Cracking (Materials)
,
Fracture (Process)
,
Low temperature
,
Particulate matter
An Experimental Investigation of the Dynamic Behavior of the Spatial RSSR Crank and Rocker Mechanism With an Asymmetrical Coupler
J. Eng. Ind. November 1976, 98(4): 1231–1236.
doi: https://doi.org/10.1115/1.3439091
Topics:
Center of mass
,
Degrees of freedom
,
Machinery
,
Torque
The Application of the Double Ligament Tensile Test in Deformation Processing
J. Eng. Ind. November 1976, 98(4): 1237–1242.
doi: https://doi.org/10.1115/1.3439092
Topics:
Alloys
,
Carbon
,
Cross section (Physics)
,
Deformation
,
Design
,
Elongation
,
Finite element analysis
,
Forgings (Products)
,
Geometry
,
Mechanical properties
The Role of Fracture Mechanics in Design Technology
J. Eng. Ind. November 1976, 98(4): 1243–1249.
doi: https://doi.org/10.1115/1.3439093
Topics:
Design
,
Fracture mechanics
,
Fracture (Materials)
,
Failure
,
Fracture toughness
,
Stress
,
Brittleness
,
Crack propagation
,
Density
,
Elasticity
Approximate Straight-Line Motion From Simple Spatial Mechanisms
J. Eng. Ind. November 1976, 98(4): 1250–1254.
doi: https://doi.org/10.1115/1.3439094
Topics:
Linkages
,
Particle spin
,
Rotation
,
Spin (Aerodynamics)
Velocity Fluctuation in Four-Bar Linkages and Slider-Crank Mechanisms
J. Eng. Ind. November 1976, 98(4): 1255–1259.
doi: https://doi.org/10.1115/1.3439095
Topics:
Linkages
,
Fluctuations (Physics)
,
Optimization
,
Algebra
,
Dynamics (Mechanics)
,
Statics
On Extreme Velocity Ratios in Spherical Four-Link Mechanisms
J. Eng. Ind. November 1976, 98(4): 1260–1265.
doi: https://doi.org/10.1115/1.3439096
Topics:
Algebra
,
Polynomials
Analytical and Experimental Investigation of Elastic Slider-Crank Mechanisms
J. Eng. Ind. November 1976, 98(4): 1266–1271.
doi: https://doi.org/10.1115/1.3439097
Automatic Orientation Control Device for Underwater Divers
J. Eng. Ind. November 1976, 98(4): 1272–1276.
doi: https://doi.org/10.1115/1.3439098
Topics:
Buoyancy
,
Engineering prototypes
,
Gravity (Force)
,
Grinding
,
Hull
,
Ships
,
Welding
Heuristic Combinatorial Optimization in the Kinematic Design of Mechanisms—Part 1: Theory
J. Eng. Ind. November 1976, 98(4): 1277–1280.
doi: https://doi.org/10.1115/1.3439099
Topics:
Design
,
Kinematics
,
Optimization
Heuristic Combinatorial Optimization in the Kinematic Design of Mechanisms—Part 2: Applications
J. Eng. Ind. November 1976, 98(4): 1281–1284.
doi: https://doi.org/10.1115/1.3439100
Topics:
Design
,
Kinematics
,
Optimization
,
Algorithms
,
Printing
,
Displacement
,
Errors
,
Torque
,
Variable speed drives
On the Criteria for the Rotatability of the Cranks of a Skew Four-Bar Linkage
J. Eng. Ind. November 1976, 98(4): 1285–1288.
doi: https://doi.org/10.1115/1.3439101
Momentum Balancing of Four-Bar Linkages
J. Eng. Ind. November 1976, 98(4): 1289–1295.
doi: https://doi.org/10.1115/1.3439102
Topics:
Linkages
,
Momentum
,
Fluctuations (Physics)
,
Angular momentum
,
Center of mass
,
Computers
,
Design
,
Vibration
Reduction of the Contact Stress in Internal Gear Pumps
J. Eng. Ind. November 1976, 98(4): 1296–1300.
doi: https://doi.org/10.1115/1.3439103
Topics:
Gear pumps
,
Stress
,
Pumps
A Derivation of a Minimal Set of Multilinear Loop Equations for Spatial Mechanisms
J. Eng. Ind. November 1976, 98(4): 1301–1305.
doi: https://doi.org/10.1115/1.3439104
A Variational Principle for the Elastodynamic Motion of Planar Linkages
J. Eng. Ind. November 1976, 98(4): 1306–1312.
doi: https://doi.org/10.1115/1.3439105
Topics:
Linkages
,
Variational principles
,
Displacement
,
Deformation
,
Equations of motion
,
Stress
Precision Insertion Control Robot and Its Application
J. Eng. Ind. November 1976, 98(4): 1313–1318.
doi: https://doi.org/10.1115/1.3439106
Mechanical Joints With Clearance: A Three-Mode Model
J. Eng. Ind. November 1976, 98(4): 1319–1323.
doi: https://doi.org/10.1115/1.3439107
Topics:
Clearances (Engineering)
,
Maintenance
,
Momentum
,
Noise (Sound)
,
Spectra (Spectroscopy)
Mechanism Design Using Animation
J. Eng. Ind. November 1976, 98(4): 1324–1329.
doi: https://doi.org/10.1115/1.3439108
Electromechanical Dynamics of a Four-Link Mechanism Operating in a Magnetic Field
J. Eng. Ind. November 1976, 98(4): 1330–1334.
doi: https://doi.org/10.1115/1.3439110
Topics:
Dynamics (Mechanics)
,
Magnetic fields
,
Design
,
Equations of motion
,
Flow (Dynamics)
,
Linkages
,
Torque
Technology Transfer in the Vibration Analysis of Linearly Tapered Cantilever Beams
J. Eng. Ind. November 1976, 98(4): 1335–1341.
doi: https://doi.org/10.1115/1.3439111
Topics:
Cantilever beams
,
Vibration analysis
,
Acoustics
,
Design
Synthesis of a Spherical Cycloidal Mechanism
J. Eng. Ind. November 1976, 98(4): 1342–1346.
doi: https://doi.org/10.1115/1.3439112
Topics:
Displacement
,
Linkages
,
Rotation
Identification of Structures Through Records Obtained During Strong Earthquake Ground Motion
J. Eng. Ind. November 1976, 98(4): 1347–1362.
doi: https://doi.org/10.1115/1.3439113
Topics:
Earthquakes
,
Algorithms
,
Differential equations
,
Excitation
,
Optimal control
,
Shear (Mechanics)
,
Stiffness
Discussions
Discussion: “Analysis of Flexible Rotor Whirl and Whip Using a Realistic Hydrodynamic Journal Bearing Model” (Myrick, Jr., S. T., and Rylander, H. G., 1976, ASME J. Eng. Ind., 98, pp. 1135–1143)
J. Eng. Ind. November 1976, 98(4): 1143.
doi: https://doi.org/10.1115/1.3439067
Topics:
Journal bearings
,
Rotors
,
Whirls
Closure to “Discussion of ‘Analysis of Flexible Rotor Whirl and Whip Using a Realistic Hydrodynamic Journal Bearing Model’” (1976, ASME J. Eng. Ind., 98, p. 1143)
J. Eng. Ind. November 1976, 98(4): 1144.
doi: https://doi.org/10.1115/1.3439068
Topics:
Journal bearings
,
Rotors
,
Whirls
Discussion: “Dynamic Stability of Timoshenko Beams by Finite Element Method” (Thomas, J., and Abbas, B. A. H., 1976, ASME J. Eng. Ind., 98, pp. 1145–1149)
J. Eng. Ind. November 1976, 98(4): 1149–1150.
doi: https://doi.org/10.1115/1.3439070
Topics:
Dynamic stability
,
Finite element methods
Closure to “Discussion of ‘Dynamic Stability of Timoshenko Beams by Finite Element Method’” (1976, ASME J. Eng. Ind., 98, pp. 1149–1150)
J. Eng. Ind. November 1976, 98(4): 1150–1151.
doi: https://doi.org/10.1115/1.3439071
Topics:
Dynamic stability
,
Finite element analysis
Discussion: “The Mechanical State of the Sublayer of a Surface Generated by Chip-Removal Process—Part 1: Cutting With a Sharp Tool” (Liu, C. R., and Barash, M. M., 1976, ASME J. Eng. Ind., 98, pp. 1192–1199)
J. Eng. Ind. November 1976, 98(4): 1199.
doi: https://doi.org/10.1115/1.3439082
Topics:
Cutting
Discussion: “The Mechanical State of the Sublayer of a Surface Generated by Chip-Removal Process—Part 1: Cutting With a Sharp Tool” (Liu, C. R., and Barash, M. M., 1976, ASME J. Eng. Ind., 98, pp. 1192–1199)
J. Eng. Ind. November 1976, 98(4): 1199–1200.
doi: https://doi.org/10.1115/1.3439083
Topics:
Cutting
Closure to “Discussions of ‘The Mechanical State of the Sublayer of a Surface Generated by Chip-Removal Process—Part 1: Cutting With a Sharp Tool’” (1976, ASME J. Eng. Ind., 98, pp. 1199–1200)
J. Eng. Ind. November 1976, 98(4): 1200–1201.
doi: https://doi.org/10.1115/1.3439084
Topics:
Cutting
Discussion: “An Investigation of Computer Control of Machining Chatter” (Subramanian, T. L., DeVries, M. F., and Wu, S. M., 1976, ASME J. Eng. Ind., 98, pp. 1209–1213)
J. Eng. Ind. November 1976, 98(4): 1213–1214.
doi: https://doi.org/10.1115/1.3439087
Topics:
Chatter
,
Computer control
Closure to “Discussion of ‘An Investigation of Computer Control of Machining Chatter’” (1976, ASME J. Eng. Ind., 98, pp. 1213–1214)
J. Eng. Ind. November 1976, 98(4): 1214.
doi: https://doi.org/10.1115/1.3439088
Topics:
Computer control
,
Machining
Discussion: “The Effect of Receiver Pressure on the Observed Flow Pattern in the Hydrostatic Extrusion of Bimetal Rods” (Story, J. M., Avitzur, B., and Hahn, Jr., W. C., 1976, ASME J. Eng. Ind., 98, pp. 909–913)
J. Eng. Ind. November 1976, 98(4): 1375.
doi: https://doi.org/10.1115/1.3439118
Topics:
Extruding
,
Flow (Dynamics)
,
Hydrostatics
,
Pressure
,
Rods
Discussion: “The Effect of Receiver Pressure on the Observed Flow Pattern in the Hydrostatic Extrusion of Bimetal Rods” (Story, J. M., Avitzur, B., and Hahn, Jr., W. C., 1976, ASME J. Eng. Ind., 98, pp. 909–913)
J. Eng. Ind. November 1976, 98(4): 1375.
doi: https://doi.org/10.1115/1.3439119
Topics:
Extruding
,
Flow (Dynamics)
,
Hydrostatics
,
Pressure
,
Rods
Discussion: “The Effect of Receiver Pressure on the Observed Flow Pattern in the Hydrostatic Extrusion of Bimetal Rods” (Story, J. M., Avitzur, B., and Hahn, Jr., W. C., 1976, ASME J. Eng. Ind., 98, pp. 909–913)
J. Eng. Ind. November 1976, 98(4): 1375–1376.
doi: https://doi.org/10.1115/1.3439120
Topics:
Extruding
,
Flow (Dynamics)
,
Hydrostatics
,
Pressure
,
Rods
Errata
Erratum: “A Note on Blade Loss Dynamics of Rotor-Bearing Systems” (Journal of Engineering for Industry, 1976, 98, pp. 497–504)
J. Eng. Ind. November 1976, 98(4): 1329.
doi: https://doi.org/10.1115/1.3439109
Topics:
Bearings
,
Blades
,
Dynamics (Mechanics)
,
Rotors
Technical Briefs
On Bidirectionally Snapping Linkages
J. Eng. Ind. November 1976, 98(4): 1363–1366.
doi: https://doi.org/10.1115/1.3439114
A Note on Slip in V-Belt Drives
J. Eng. Ind. November 1976, 98(4): 1366–1368.
doi: https://doi.org/10.1115/1.3439115
Topics:
V-belts
Theoretical Thermoelastic Consideration on Accuracy in Machining Metals
J. Eng. Ind. November 1976, 98(4): 1368–1370.
doi: https://doi.org/10.1115/1.3439116
Topics:
Machining
,
Metals
,
Thermoelasticity
Prediction of Cylinder Flow Pressures in Mass-Flow Bins Using Minimum Strain Energy
J. Eng. Ind. November 1976, 98(4): 1370–1374.
doi: https://doi.org/10.1115/1.3439117
Topics:
Cylinders
,
Flow (Dynamics)
,
Pressure
,
Approximation
,
Circular cylinders
,
Design
,
Geometry
Email alerts
RSS Feeds
On-Orbit Processing and Hardware Performance of Microgravity Hydrothermal Synthesis for Graphene Aerogel
J. Manuf. Sci. Eng (December 2024)
A Review on Metallic Drilling Burrs: Geometry, Formation, and Effect on the Mechanical Strength of Metallic Assemblies
J. Manuf. Sci. Eng (April 2025)
A Generalized Machining Process Damping Model for Orthogonal Cutting
J. Manuf. Sci. Eng