Volume 128 Issue 3 | J. Eng. Mater. Technol.

Skip Nav Destination

Foreword

Special Section on Damping of Shape Memory Alloys, Composites, and Foams

M. Cherkaoui, Yves Berthelot

J. Eng. Mater. Technol. July 2006, 128(3): 253. doi: https://doi.org/10.1115/1.2204848

Extract

View articletitled, Special Section on Damping of Shape Memory Alloys, Composites, and Foams

Open the PDF for in another window

Topics: Composite materials , Damping , Foams (Chemistry) , Shape memory alloys

Special Section on Damping of Shape Memory Alloys, Composites, and Foams

Effect of H-Doping on Damping Capacity of Various $NiTi$ -Based Alloys at kHz Frequencies

B. Coluzzi, A. Biscarini, G. Mazzolai, F. M. Mazzolai, A. Tuissi

J. Eng. Mater. Technol. July 2006, 128(3): 254–259. doi: https://doi.org/10.1115/1.2203202

Abstract

View articletitled, Effect of H-Doping on Damping Capacity of Various <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><mi>NiTi</mi></mrow></math>-Based Alloys at kHz Frequencies

Open the PDF for in another window

Topics: Alloys , Damping , Hydrogen , Nickel titanium alloys , Temperature , Young's modulus , Internal friction , Noise (Sound) , Pollution

Small Amplitude Dynamic Properties of ${Ni}_{48} {Ti}_{46} {Cu}_{6}$ SMA Ribbons: Experimental Results and Modelling

C. Remillat, M. R. Hassan, F. Scarpa

J. Eng. Mater. Technol. July 2006, 128(3): 260–267. doi: https://doi.org/10.1115/1.2204949

Abstract

View articletitled, Small Amplitude Dynamic Properties of <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><msub><mi mathvariant="normal">Ni</mi><mn>48</mn></msub><msub><mi mathvariant="normal">Ti</mi><mn>46</mn></msub><msub><mi mathvariant="normal">Cu</mi><mn>6</mn></msub></mrow></math> SMA Ribbons: Experimental Results and Modelling

Open the PDF for in another window

Topics: Damping , Excitation , Heating , Modeling , Stiffness , Storage , Temperature , Testing , Viscoelasticity , Cooling

Stress-Strain-Temperature Behavior Due to $B 2 - R - B 19^{'}$ Transformation in $NiTi$ Polycrystals

P. Šittner, V. Novák, P. Lukáš, M. Landa

J. Eng. Mater. Technol. July 2006, 128(3): 268–278. doi: https://doi.org/10.1115/1.2204945

Abstract

View articletitled, Stress-Strain-Temperature Behavior Due to <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><mi mathvariant="normal">B</mi><mn>2</mn><mtext>-</mtext><mi mathvariant="normal">R</mi><mtext>-</mtext><mi mathvariant="normal">B</mi><msup><mn>19</mn><mo>′</mo></msup></mrow></math> Transformation in <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><mi>NiTi</mi></mrow></math> Polycrystals

Open the PDF for in another window

Topics: Nickel titanium alloys , Stress , Temperature , Neutron diffraction , Wire , Thermomechanics

A Phenomenological Model for Superelastic $NiTi$ Wires Based on Plasticity With Focus on Strain-Rate Dependency Caused by Temperature

Ina Schmidt

J. Eng. Mater. Technol. July 2006, 128(3): 279–284. doi: https://doi.org/10.1115/1.2204940

Abstract

View articletitled, A Phenomenological Model for Superelastic <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><mi>NiTi</mi></mrow></math> Wires Based on Plasticity With Focus on Strain-Rate Dependency Caused by Temperature

Open the PDF for in another window

Topics: Latent heat , Nickel titanium alloys , Plasticity , Stress , Temperature , Tension , Thermomechanics , Wire , Heat , Martensitic transformations

Finite Element Analysis of Adaptive-Stiffening and Shape-Control SMA Hybrid Composites

Xiujie Gao, Deborah Burton, Travis L. Turner, L. Catherine Brinson

J. Eng. Mater. Technol. July 2006, 128(3): 285–293. doi: https://doi.org/10.1115/1.2203108

Abstract

View articletitled, Finite Element Analysis of Adaptive-Stiffening and Shape-Control SMA Hybrid Composites

Open the PDF for in another window

Topics: Composite building materials , Composite materials , Finite element analysis , Shapes , Temperature , Stress , Deflection , Simulation , Buckling , Shape memory alloys

Seismic Vibration Control Using Superelastic Shape Memory Alloys

Jason McCormick, Reginald DesRoches, Davide Fugazza, Ferdinando Auricchio

J. Eng. Mater. Technol. July 2006, 128(3): 294–301. doi: https://doi.org/10.1115/1.2203109

Abstract

View articletitled, Seismic Vibration Control Using Superelastic Shape Memory Alloys

Open the PDF for in another window

Topics: Bracing (Construction) , Buckling , Damping , Earthquakes , Nickel titanium alloys , Shape memory alloys , Steel , Vibration control , Wire , Stress

Theoretical and Experimental Studies for the Application of Shape Memory Alloys in Civil Engineering

Mauro Dolce, Donatello Cardone

J. Eng. Mater. Technol. July 2006, 128(3): 302–311. doi: https://doi.org/10.1115/1.2203106

Abstract

View articletitled, Theoretical and Experimental Studies for the Application of Shape Memory Alloys in Civil Engineering

Open the PDF for in another window

Topics: Bracing (Construction) , Bridges (Structures) , Civil engineering , Conceptual design , Displacement , Earthquakes , Energy dissipation , Passive control , Shape memory alloys , Steel

Numerical and Experimental Evaluation of the Damping Properties of Shape-Memory Alloys

Ferdinando Auricchio, Davide Fugazza, Reginald DesRoches

J. Eng. Mater. Technol. July 2006, 128(3): 312–319. doi: https://doi.org/10.1115/1.2204948

Abstract

View articletitled, Numerical and Experimental Evaluation of the Damping Properties of Shape-Memory Alloys

Open the PDF for in another window

Topics: Computer simulation , Constitutive equations , Damping , Heat , Shape memory alloys , Stress , Stress-strain relations , Temperature , Thermomechanics , Wire

Micromechanical Modeling of Particulate Composites for Damping of Acoustic Waves

Michael R. Haberman, Yves H. Berthelot, Mohammed Cherkaoui

J. Eng. Mater. Technol. July 2006, 128(3): 320–329. doi: https://doi.org/10.1115/1.2204943

Abstract

View articletitled, Micromechanical Modeling of Particulate Composites for Damping of Acoustic Waves

Open the PDF for in another window

Topics: Acoustics , Approximation , Coating processes , Coatings , Composite materials , Modeling , Tensors , Waves , Particulate matter , Damping

Partial Hyperbolic-Tangent Friction Element Based Phenomenological Models for Shape Memory Alloy Pseudoelastic Hysteresis

Brendon Malovrh, Farhan Gandhi

J. Eng. Mater. Technol. July 2006, 128(3): 346–355. doi: https://doi.org/10.1115/1.2204941

Abstract

View articletitled, Partial Hyperbolic-Tangent Friction Element Based Phenomenological Models for Shape Memory Alloy Pseudoelastic Hysteresis

Open the PDF for in another window

Topics: Friction , Springs , Shape memory alloys , Temperature

Special Section on Damping of Shape Memory Alloys, Composites, and Foams

An Approximated Harmonic Balance Method for Nonlinear Vibration of Viscoelastic Structures

El Hassan Boutyour, El Mostafa Daya, Lahcen Azrar, Michel Potier-Ferry

J. Eng. Mater. Technol. July 2006, 128(3): 330–334. doi: https://doi.org/10.1115/1.2204944

Abstract

View articletitled, An Approximated Harmonic Balance Method for Nonlinear Vibration of Viscoelastic Structures

Open the PDF for in another window

Topics: Eigenvalues , Nonlinear vibration , Shells , Vibration , Approximation , Plates (structures) , Galerkin method , Viscoelasticity

Shape Memory Alloys Cyclic Behavior: Experimental Study and Modeling

P. Malécot, C. Lexcellent, E. Foltête, M. Collet

J. Eng. Mater. Technol. July 2006, 128(3): 335–345. doi: https://doi.org/10.1115/1.2204947

Abstract

View articletitled, Shape Memory Alloys Cyclic Behavior: Experimental Study and Modeling

Open the PDF for in another window

Research Papers

Crystal Plasticity Based Fe Model for Understanding Microstructural Effects on Creep and Dwell Fatigue in Ti-6242

Gayathri Venkataramani, Dhyanjyoti Deka, Somnath Ghosh

J. Eng. Mater. Technol. July 2006, 128(3): 356–365. doi: https://doi.org/10.1115/1.2204942

Abstract

View articletitled, Crystal Plasticity Based Fe Model for Understanding Microstructural Effects on Creep and Dwell Fatigue in Ti-6242

Open the PDF for in another window

Topics: Creep , Crystals , Finite element model , Plasticity , Stress , Fatigue , Failure

Size Effect on Strength of Laminate-Foam Sandwich Plates

Zdeněk P. Bažant, Yong Zhou, Isaac M. Daniel, Ferhun C. Caner, Qiang Yu

J. Eng. Mater. Technol. July 2006, 128(3): 366–374. doi: https://doi.org/10.1115/1.2194557

Abstract

View articletitled, Size Effect on Strength of Laminate-Foam Sandwich Plates

Open the PDF for in another window

Topics: Fracture (Materials) , Size effect , Stress , Plates (structures) , Skin , Laminates , Epoxy adhesives , Failure

Use of Inverse Solutions for Residual Stress Measurements

Gary S. Schajer, Michael B. Prime

J. Eng. Mater. Technol. July 2006, 128(3): 375–382. doi: https://doi.org/10.1115/1.2204952

Abstract

View articletitled, Use of Inverse Solutions for Residual Stress Measurements

Open the PDF for in another window

Topics: Stress , Equilibrium (Physics) , Integral equations , Noise (Sound) , Deformation

Effect of Material Anisotropy and Curing Stresses on Interface Delamination Propagation Characteristics in Multiply Laminated FRP Composites

Brajabandhu Pradhan, Saroja Kanta Panda

J. Eng. Mater. Technol. July 2006, 128(3): 383–392. doi: https://doi.org/10.1115/1.2203100

Abstract

View articletitled, Effect of Material Anisotropy and Curing Stresses on Interface Delamination Propagation Characteristics in Multiply Laminated FRP Composites

Open the PDF for in another window

Topics: Composite materials , Delamination , Fiber reinforced plastics , Hardening (Curing) , Laminates , Stress , Thermoelasticity , Fracture (Materials) , Anisotropy

Actual Safety Distance and Winding Tension to Manufacture Full Section Parts by Robotized Filament Winding

W. Polini, L. Sorrentino

J. Eng. Mater. Technol. July 2006, 128(3): 393–400. doi: https://doi.org/10.1115/1.2203099

Abstract

View articletitled, Actual Safety Distance and Winding Tension to Manufacture Full Section Parts by Robotized Filament Winding

Open the PDF for in another window

Topics: Safety , Tension , Trajectories (Physics) , Winding (process)

Deformation and Life Estimates for a Metal Matrix—Spherical Particulate Subjected to Thermomechanical Loading

Russell J. McDonald, Peter Kurath

J. Eng. Mater. Technol. July 2006, 128(3): 401–418. doi: https://doi.org/10.1115/1.2209649

Abstract

View articletitled, Deformation and Life Estimates for a Metal Matrix—Spherical Particulate Subjected to Thermomechanical Loading

Open the PDF for in another window

Topics: Composite materials , Creep , Deformation , Simulation , Stress , Temperature , Particulate matter , Fatigue , Cooling , Damage

Buckling Analysis of Multiwalled Carbon Nanotubes Under Torsional Load Coupling With Temperature Change

Xiaohu Yao, Qiang Han

J. Eng. Mater. Technol. July 2006, 128(3): 419–427. doi: https://doi.org/10.1115/1.2203102

Abstract

View articletitled, Buckling Analysis of Multiwalled Carbon Nanotubes Under Torsional Load Coupling With Temperature Change

Open the PDF for in another window

Topics: Buckling , Multi-walled carbon nanotubes , Stress , Temperature , Van der Waals forces , Nanotubes

Material Flow in FSW of AA7075-T6 Butt Joints: Continuous Dynamic Recrystallization Phenomena

L. Fratini, G. Buffa, D. Palmeri, J. Hua, R. Shivpuri

J. Eng. Mater. Technol. July 2006, 128(3): 428–435. doi: https://doi.org/10.1115/1.2204946

Abstract

View articletitled, Material Flow in FSW of AA7075-T6 Butt Joints: Continuous Dynamic Recrystallization Phenomena

Open the PDF for in another window

Topics: Flow (Dynamics) , Recrystallization , Finite element model

Effect of Yield Criterion on Numerical Simulation Results Using a Stress-Based Failure Criterion

Aaron Sakash, Sumit Moondra, Brad L. Kinsey

J. Eng. Mater. Technol. July 2006, 128(3): 436–444. doi: https://doi.org/10.1115/1.2204951

Abstract

View articletitled, Effect of Yield Criterion on Numerical Simulation Results Using a Stress-Based Failure Criterion

Open the PDF for in another window

Topics: Computer simulation , Failure , Forming limit diagrams , Stress , Domes (Structural elements)

Combustion Synthesis of a Functionally Graded $Ni Ti - Ti C_{x}$ Composite

Douglas E. Burkes, John J. Moore

J. Eng. Mater. Technol. July 2006, 128(3): 445–450. doi: https://doi.org/10.1115/1.2204950

Abstract

View articletitled, Combustion Synthesis of a Functionally Graded <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><mi mathvariant="normal">Ni</mi><mi mathvariant="normal">Ti</mi><mtext>-</mtext><mi mathvariant="normal">Ti</mi><msub><mi mathvariant="normal">C</mi><mi>x</mi></msub></mrow></math> Composite

Open the PDF for in another window

Topics: Combustion , Composite materials , Functionally graded materials , Nickel titanium alloys , Temperature , Porosity

Measurement and Prediction of the Residual Stress Field Generated by Side-Punching

A. H. Mahmoudi, D. Stefanescu, S. Hossain, C. E. Truman, D. J. Smith, P. J. Withers

J. Eng. Mater. Technol. July 2006, 128(3): 451–459. doi: https://doi.org/10.1115/1.2203103

Abstract

View articletitled, Measurement and Prediction of the Residual Stress Field Generated by Side-Punching

Open the PDF for in another window

Topics: Drilling , Punching (Metalworking) , Residual stresses , Stress , Finite element analysis , Aluminum alloys

Effects of ${CO}_{2}$ Laser Surface Processing on Fracture Behavior of Silicon Nitride Ceramic

Li Sun, Ajay P. Malshe, Wenping Jiang, Philip H. McCluskey

J. Eng. Mater. Technol. July 2006, 128(3): 460–467. doi: https://doi.org/10.1115/1.2203104

Abstract

View articletitled, Effects of <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><msub><mi>CO</mi><mn>2</mn></msub></mrow></math> Laser Surface Processing on Fracture Behavior of Silicon Nitride Ceramic

Open the PDF for in another window

Topics: Bending strength , Carbon dioxide lasers , Fracture (Materials) , Fracture (Process) , Lasers , Silicon nitride ceramics , Grinding , Fractography , Stress , Ceramics

Design Innovation

Application of EDM Hole-Drilling Method to the Measurement of Residual Stress in Tool and Carbon Steels

Hwa-Teng Lee, Joachim Mayer, Fu-Chuan Hsu, Werner P. Rehbach, Thomas Weirich, Arbi Dimyati, Tzu-Yao Tai

J. Eng. Mater. Technol. July 2006, 128(3): 468–475. doi: https://doi.org/10.1115/1.2204953

Abstract

View articletitled, Application of EDM Hole-Drilling Method to the Measurement of Residual Stress in Tool and Carbon Steels

Open the PDF for in another window

Topics: Carbon steel , Drilling , Electrical discharge machining , Stress , Thermal conductivity , Strain gages

Foreword

Special Section on Damping of Shape Memory Alloys, Composites, and Foams

Special Section on Damping of Shape Memory Alloys, Composites, and Foams

Effect of H-Doping on Damping Capacity of Various $NiTi$ -Based Alloys at kHz Frequencies

Small Amplitude Dynamic Properties of ${Ni}_{48} {Ti}_{46} {Cu}_{6}$ SMA Ribbons: Experimental Results and Modelling

Stress-Strain-Temperature Behavior Due to $B 2 - R - B 19^{'}$ Transformation in $NiTi$ Polycrystals

A Phenomenological Model for Superelastic $NiTi$ Wires Based on Plasticity With Focus on Strain-Rate Dependency Caused by Temperature

Finite Element Analysis of Adaptive-Stiffening and Shape-Control SMA Hybrid Composites

Seismic Vibration Control Using Superelastic Shape Memory Alloys

Theoretical and Experimental Studies for the Application of Shape Memory Alloys in Civil Engineering

Numerical and Experimental Evaluation of the Damping Properties of Shape-Memory Alloys

Micromechanical Modeling of Particulate Composites for Damping of Acoustic Waves

Partial Hyperbolic-Tangent Friction Element Based Phenomenological Models for Shape Memory Alloy Pseudoelastic Hysteresis

Special Section on Damping of Shape Memory Alloys, Composites, and Foams

An Approximated Harmonic Balance Method for Nonlinear Vibration of Viscoelastic Structures

Shape Memory Alloys Cyclic Behavior: Experimental Study and Modeling

Research Papers

Crystal Plasticity Based Fe Model for Understanding Microstructural Effects on Creep and Dwell Fatigue in Ti-6242

Size Effect on Strength of Laminate-Foam Sandwich Plates

Use of Inverse Solutions for Residual Stress Measurements

Effect of Material Anisotropy and Curing Stresses on Interface Delamination Propagation Characteristics in Multiply Laminated FRP Composites

Actual Safety Distance and Winding Tension to Manufacture Full Section Parts by Robotized Filament Winding

Deformation and Life Estimates for a Metal Matrix—Spherical Particulate Subjected to Thermomechanical Loading

Buckling Analysis of Multiwalled Carbon Nanotubes Under Torsional Load Coupling With Temperature Change

Material Flow in FSW of AA7075-T6 Butt Joints: Continuous Dynamic Recrystallization Phenomena

Effect of Yield Criterion on Numerical Simulation Results Using a Stress-Based Failure Criterion

Combustion Synthesis of a Functionally Graded $Ni Ti - Ti C_{x}$ Composite

Measurement and Prediction of the Residual Stress Field Generated by Side-Punching

Effects of ${CO}_{2}$ Laser Surface Processing on Fracture Behavior of Silicon Nitride Ceramic

Design Innovation

Application of EDM Hole-Drilling Method to the Measurement of Residual Stress in Tool and Carbon Steels

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Foreword

Special Section on Damping of Shape Memory Alloys, Composites, and Foams

Special Section on Damping of Shape Memory Alloys, Composites, and Foams

Research Papers

Design Innovation

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only