A method is presented for the evaluation of the transmissibility of displacement from smart (active) actuators integrated in the structure of robot manipulators to the manipulator joint and end-effector displacements. The method is based on studying the characteristics of the Jacobian of the mapping function between the two displacements for a given position of the robot manipulator. The developed method provides a tool for the determination of the positioning of smart actuators to provide maximum effectiveness in eliminating high harmonics of the joint or the end-effector motion. In robots with serial and parallel kinematics chains containing nonprismatic joints, due to the associated kinematics nonlinearity, if the joint motions were synthesized with low harmonic trajectories, the end-effector trajectory would still contain high harmonics of the joint motions. Alternatively, if the end-effector motion were synthesized with low harmonic components, due to the inverse kinematics nonlinearity, the actuated joint trajectories would contain a significant high harmonic component. As a result, the operating speed and tracking precision are degraded. By integrating smart materials based actuators in the structure of robot manipulators to provide small amplitude and high frequency motions, the high harmonic component of the actuated joint and/or the end-effector motions can be significantly reduced, thereby making it possible to achieve higher operating speed and tracking precision.
Skip Nav Destination
Article navigation
July 2005
Technical Papers
Smart Actuator Positioning and Displacement Transmissibility in Serial and Parallel Robot Manipulators for Performance Enhancement
J. Rastegar,
J. Rastegar
Department of Mechanical Engineering,
State University of New York at Stony Brook
, Stony Brook, New York 11794-2300
Search for other works by this author on:
L. Yuan,
L. Yuan
Department of Mechanical Engineering,
State University of New York at Stony Brook
, Stony Brook, New York 11794-2300
Search for other works by this author on:
J. Zhang
J. Zhang
Department of Mechanical Engineering,
State University of New York at Stony Brook
, Stony Brook, New York 11794-2300
Search for other works by this author on:
J. Rastegar
Department of Mechanical Engineering,
State University of New York at Stony Brook
, Stony Brook, New York 11794-2300
L. Yuan
Department of Mechanical Engineering,
State University of New York at Stony Brook
, Stony Brook, New York 11794-2300
J. Zhang
Department of Mechanical Engineering,
State University of New York at Stony Brook
, Stony Brook, New York 11794-2300J. Mech. Des. Jul 2005, 127(4): 589-595 (7 pages)
Published Online: September 14, 2004
Article history
Received:
April 14, 2003
Revised:
September 14, 2004
Citation
Rastegar, J., Yuan, L., and Zhang, J. (September 14, 2004). "Smart Actuator Positioning and Displacement Transmissibility in Serial and Parallel Robot Manipulators for Performance Enhancement." ASME. J. Mech. Des. July 2005; 127(4): 589–595. https://doi.org/10.1115/1.1898340
Download citation file:
Get Email Alerts
Cited By
Related Articles
Discussion: “Kinematics of a New High-Precision Three-Degree-of-Freedom Parallel Manipulator” ( Tahmasebi, F., 2007, ASME J. Mech. Des., 129, pp. 320–325 )
J. Mech. Des (March,2008)
Forward Problem Singularities of Manipulators Which Become PS-2RS or 2PS-RS Structures When the Actuators are Locked
J. Mech. Des (July,2004)
Fourier Methods for Kinematic Synthesis of Coupled Serial Chain Mechanisms
J. Mech. Des (March,2005)
The 3-RRS Wrist: A New, Simple and Non-Overconstrained Spherical Parallel Manipulator
J. Mech. Des (September,2004)
Related Proceedings Papers
Related Chapters
QP Based Encoder Feedback Control
Robot Manipulator Redundancy Resolution
Feedback-Aided Minimum Joint Motion
Robot Manipulator Redundancy Resolution
QP-Based Self-Motion Planning
Robot Manipulator Redundancy Resolution