A very common configuration of V-belt variators for motorcycles considers the correction of the belt tensioning depending on the resistant torque by means of suitable helical-shaped tracks allowing the driven half-pulleys to close/open. The theoretical model for belt-pulley coupling is rather complex for this configuration, where one half-pulley may run in advance and the other one behind with respect to the belt, and requires the repeated numerical solution of a strongly nonlinear differential system by a sort of shooting technique, until all the operating conditions are fulfilled (angular contact extent, torque, and axial force). After solving the full equations, the present study develops closed-form approximations, which are characterized by an excellent correspondence with the numerical plots, and suggests a simple and practical formulary for the axial thrust as a function of the torque and of the tension level. Then, the results of a theoretical–experimental comparison are also reported, and they indicate a fine agreement between the model and the real operation.
Skip Nav Destination
e-mail: francesco.sorge@unipa.it
e-mail: marco.cammalleri@unipa.it
Article navigation
April 2011
Research Papers
Helical Shift Mechanics of Rubber V-Belt Variators
Francesco Sorge,
Francesco Sorge
Dipartimento di Ingegneria Industriale,
e-mail: francesco.sorge@unipa.it
Università di Palermo
, Viale delle Scienze, Palermo 90128, Italy
Search for other works by this author on:
Marco Cammalleri
Marco Cammalleri
Dipartimento di Ingegneria Industriale,
e-mail: marco.cammalleri@unipa.it
Università di Palermo
, Viale delle Scienze, Palermo 90128, Italy
Search for other works by this author on:
Francesco Sorge
Dipartimento di Ingegneria Industriale,
Università di Palermo
, Viale delle Scienze, Palermo 90128, Italy
e-mail: francesco.sorge@unipa.it
Marco Cammalleri
Dipartimento di Ingegneria Industriale,
Università di Palermo
, Viale delle Scienze, Palermo 90128, Italy
e-mail: marco.cammalleri@unipa.it
J. Mech. Des. Apr 2011, 133(4): 041006 (8 pages)
Published Online: May 18, 2011
Article history
Received:
August 9, 2010
Revised:
February 25, 2011
Published:
May 18, 2011
Citation
Sorge, F., and Cammalleri, M. (May 18, 2011). "Helical Shift Mechanics of Rubber V-Belt Variators." ASME. J. Mech. Des. April 2011; 133(4): 041006. https://doi.org/10.1115/1.4003803
Download citation file:
Get Email Alerts
Cited By
DeepJEB: 3D Deep Learning-Based Synthetic Jet Engine Bracket Dataset
J. Mech. Des (April 2025)
Design and Justice: A Scoping Review in Engineering Design
J. Mech. Des (May 2025)
Related Articles
Factors Affecting Transmission Error in Helical Synchronous Belt With Error on Belt Side Face Under Bidirectional Operation
J. Mech. Des (July,2010)
Theoretical Model of Metal V-Belt Drives During Rapid Ratio Changing
J. Mech. Des (March,2001)
Influence of Tensioner Dry Friction on the Vibration of Belt Drives With Belt Bending Stiffness
J. Vib. Acoust (February,2008)
Transient Dynamics of the Metal V-Belt CVT: Effects of Pulley Flexibility and Friction Characteristic
J. Comput. Nonlinear Dynam (January,2007)
Related Proceedings Papers
Related Chapters
Computer Aided Machine Design
Computer Aided Design and Manufacturing
Class Variables
Engineering Optimization: Applications, Methods, and Analysis
Elastohydrodynamic Analysis of the Conrod Small-End of a High Performance Motorbike Engine via a Mass Conserving Cavitation Algorithm
Advances in Multidisciplinary Engineering