Precurved needles are used in a variety of medical applications for both passive and active control of instrument position. In one application, the deployment of a precurved stylet from a concentric outer cannula can be used to achieve lateral positioning of the distal tip of the stylet. This paper outlines how the material and geometry of the stylet can be chosen to ensure that it will not yield and thus repeatedly return to its precurved shape when deployed from a cannula. Using this methodology, we calculate the maximum strain for a range of stylet geometries and show that nitinol is required for the stylet material so that it will not plastically deform. Then, 16 stylets of varying diameters (0.508 mm, 0.635 mm, 0.838 mm, and 0.990 mm) and radii of curvature (10 mm, 20 mm, 30 mm, and 40 mm) were manufactured. Experiments were performed with four different diameter cannulas (20, 18, 16, and 14 gauges) to measure the forces required to deploy the stylets from and retract them back inside the cannulas. Retraction forces were measured between 0.3 N and 13.9 N, and deployment forces were measured between 0.2 N and 7.0 N. For a given cannula, it was found that force increases as the stylet diameter increases and as the bend radius decreases.
Skip Nav Destination
Article navigation
Design Of Medical Devices Conference Abstracts
Characterization of Precurved Needles for Use in Distal Tip Manipulation Mechanisms
Conor Walsh,
Conor Walsh
Massachusetts Institute of Technology
Search for other works by this author on:
Alexander H. Slocum,
Alexander H. Slocum
Massachusetts Institute of Technology
Search for other works by this author on:
Rajiv Gupta
Rajiv Gupta
Massachusetts General Hospital
Search for other works by this author on:
Conor Walsh
Massachusetts Institute of Technology
Jeremy Franklin
Apple, Inc.
Alexander H. Slocum
Massachusetts Institute of Technology
Rajiv Gupta
Massachusetts General Hospital
J. Med. Devices. Jun 2010, 4(2): 027536 (1 pages)
Published Online: August 11, 2010
Article history
Published:
August 11, 2010
Citation
Walsh, C., Franklin, J., Slocum, A. H., and Gupta, R. (August 11, 2010). "Characterization of Precurved Needles for Use in Distal Tip Manipulation Mechanisms." ASME. J. Med. Devices. June 2010; 4(2): 027536. https://doi.org/10.1115/1.3443756
Download citation file:
Get Email Alerts
Cited By
Related Articles
On Modeling Assumptions in FEA of Stents
J. Med. Devices (June,2011)
Single Entry Tunneler (SET) for Hemodialysis Graft Procedures
J. Med. Devices (June,2011)
Esophageal Prosthesis For Refractory Gastresophageal Reflux Disease Prevention
J. Med. Devices (June,2011)
A New Actuation System With Simulated Electrocardiogram Signal for MR Elastography
J. Med. Devices (June,2010)
Related Proceedings Papers
Related Chapters
Internal and Near Nozzle Flow Simulations of Gasoline Multi-Hole Injector (ECN Spray G) with Transient Needle Motion
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Investigation on Cavitating Flow of a Novel High Pressure Nozzle with Grooved Needle
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Optimization of Extraction Conditions of Shikimic Acid in Pine Needles Based on Artificial Neural Network
International Conference on Advanced Computer Theory and Engineering, 5th (ICACTE 2012)