... was performed, which showed that the design meets the technical demands. Titanium prototypes were fabricated for stiffness and endurance testing. biological tissues biomechanics biomedical equipment biomedical materials compressibility deformation elastic constants finite element analysis muscle...

... for the fabrication of the porous titanium blocks using the electron beam melting process. Zhou , L. B. , Shang , H. T. , Hua , M. , Li , D. , Sigare , S. , Chen , B. L. , Liu , Y. P. , and Zhao , J. L. , 2008 , “ Reconstruction Of Curved Mandibular Angle Defects Using...

... materials such as nitinol or titanium can reduce the mismatch in bulk susceptibility of a foreign object and the surrounding tissue. Muller-Bierl et al. have succeeded in reducing MRI field distortion by coating titanium wire with bismuth. Wilson et al. used a pyrolytic graphite mouth shim to improve brain...

...C. Aparicio; E. Salvagni; M. Werner; E. Engel; M. Pegueroles; C. Rodriguez-Cabello; F. Munoz; J. A. Planell; J. Gil Commercially pure titanium (cp Ti) dental implants have been widely and successfully used with high rates of clinical success in normal situations. However, there is still a lack...

... to the intact case, were smaller. The predicted facet loads decreased up to 25.7% in extension and 25.1% in bending at the implanted level as compared to intact spine segment. For all of the loading modes, the stresses in both implant designs were less than the yield stress of titanium. Therefore, the implants...