Study on Dynamic Postbuckling Stability of Fast Reactor Vessels Subjected to Vertical Vibration

As a lesson learned from the Fukushima nuclear accident, the importance of accident mitigation for beyond-design basis events (BDBEs) is recognized. Excessive earthquake is a typical BDBE. During such events, the fast reactor vessel (FRV) is vulnerable to buckling. The safety goal of FRV under excessive earthquake is to achieve a stable post-buckling state. Our previous study on bending buckling confirmed a global response stability under horizontal vibration. As a parallel study, this paper focuses on axial compression buckling under vertical vibration. Shaking table experiments using thin-walled cylindrical models (R/t = 260) are carried out. Similar methodology is applied to investigate the buckling and post-buckling behavior. It is found that axial compression buckling shares an extensive similarity with bending buckling in both buckling mode and post-buckling behavior. Similar global response stability is confirmed due to phase-inverse phenomenon. After buckling, buckling failure becomes stable and does not progress further even when an intense input amplitude is continuously applied. The vibrational load acts as a displacement-controlled load in the out-of-phase domain such that immediate collapse is prevented. Most input energy is dissipated in hysteresis loops rather than being carried by the mass. These mechanisms are independent of input waveform and can be applied to an arbitrary seismic input. In addition, a conservative limit displacement for global response stability is identified. Moreover, the effect of the input frequency ratio, the initial geometrical imperfection, and the gravitational force on the post-buckling behavior are clarified.