Skip Nav Destination
Issues
November 2007
ISSN 0094-9930
EISSN 1528-8978
In this Issue
Research Papers
Sloshing in a Cylindrical Liquid Storage Tank With a Floating Roof Under Seismic Excitation
J. Pressure Vessel Technol. November 2007, 129(4): 557–566.
doi: https://doi.org/10.1115/1.2767333
Topics:
Roofs
,
Sloshing
,
Storage tanks
,
Stiffness
A Study on the Hydrodynamic Load in a Water Pool When Discharged Air Forms a Bubble Cloud (PVP2006-ICPVT11-93281)
J. Pressure Vessel Technol. November 2007, 129(4): 567–575.
doi: https://doi.org/10.1115/1.2767334
Prediction of Erosion Due to Solid Particle Impact in Single-Phase and Multiphase Flows
J. Pressure Vessel Technol. November 2007, 129(4): 576–582.
doi: https://doi.org/10.1115/1.2767336
Topics:
Erosion
,
Flow (Dynamics)
,
Multiphase flow
,
Particle collisions
,
Particulate matter
,
Drops
,
Slug flows
,
Pipes
Evaluation of Turbulence Models for Thermal Striping in a Triple Jet
J. Pressure Vessel Technol. November 2007, 129(4): 583–592.
doi: https://doi.org/10.1115/1.2767337
Topics:
Relaxation (Physics)
,
Shear stress
,
Temperature
,
Turbulence
,
Boundary-value problems
A Comparative Numerical Study of Particle Mixing on Different Grate Designs Through the Discrete Element Method
J. Pressure Vessel Technol. November 2007, 129(4): 593–600.
doi: https://doi.org/10.1115/1.2767338
Topics:
Fireplaces
,
Particulate matter
Finite Element Prediction of Residual Stress Distributions in a Multipass Welded Piping Branch Junction
J. Pressure Vessel Technol. November 2007, 129(4): 601–608.
doi: https://doi.org/10.1115/1.2767343
Topics:
Junctions
,
Pipes
,
Stress
,
Welding
,
Finite element analysis
,
Residual stresses
Significance of Fracture Toughness Test Results of Beam Welds in Evaluation of Brittle Fracture Performance of Girth Welded Pipe Joints
J. Pressure Vessel Technol. November 2007, 129(4): 609–618.
doi: https://doi.org/10.1115/1.2767652
Topics:
Fracture (Materials)
,
Fracture toughness
,
Metals
,
Stress
,
Welded joints
,
Pipe joints
,
Brittle fracture
Strategy of Considering Microstructure Effect on Weld Residual Stress Analysis
J. Pressure Vessel Technol. November 2007, 129(4): 619–629.
doi: https://doi.org/10.1115/1.2767344
Topics:
Temperature
,
Thermodynamic cycles
,
Welded joints
,
Welding
,
Stress analysis (Engineering)
,
Stress
,
Cooling
,
Phase transitions
,
Heat
Lateral Loading of Internally Pressurized Steel Pipes
J. Pressure Vessel Technol. November 2007, 129(4): 630–638.
doi: https://doi.org/10.1115/1.2767345
Topics:
Finite element analysis
,
Pipes
,
Pressure
,
Steel
,
Stress
,
Deformation
,
Wedges
,
Displacement
,
Membranes
Prediction of Fracture Stresses of High Pressure Gas Cylinders Containing Cracklike Flaws
J. Pressure Vessel Technol. November 2007, 129(4): 639–643.
doi: https://doi.org/10.1115/1.2767346
Theoretical and Numerical Predictions of Burst Pressure of Pipelines
J. Pressure Vessel Technol. November 2007, 129(4): 644–652.
doi: https://doi.org/10.1115/1.2767352
Topics:
Pipelines
,
Pipes
,
Pressure
,
Stress
,
Finite element analysis
,
Tensile strength
,
Steel
,
Failure
Novel Formulation of the Tightening and Breakaway Torque Components in Threaded Fasteners
J. Pressure Vessel Technol. November 2007, 129(4): 653–663.
doi: https://doi.org/10.1115/1.2767354
Asymptotic Crack-Tip Fields in Perfectly Plastic Solids Under Mixed Mode II/III Loading Conditions
J. Pressure Vessel Technol. November 2007, 129(4): 664–669.
doi: https://doi.org/10.1115/1.2767355
Topics:
Fracture (Materials)
,
Stress
,
Plastics
,
Manufacturing
Unified Solutions to the Limit Load of Thick-Walled Vessels
J. Pressure Vessel Technol. November 2007, 129(4): 670–675.
doi: https://doi.org/10.1115/1.2767356
Topics:
Cylinders
,
Pressure
,
Stress
,
Vessels
,
Field theories (Physics)
,
Compressive strength
,
Coulombs
,
Tensile strength
,
Shear strength
Stress Classification Using the -Node Method
J. Pressure Vessel Technol. November 2007, 129(4): 676–682.
doi: https://doi.org/10.1115/1.2767357
Optimum Replacement Interval for Mechanical Components Based on Fatigue Reliability
J. Pressure Vessel Technol. November 2007, 129(4): 683–688.
doi: https://doi.org/10.1115/1.2767359
Topics:
Damage
,
Fatigue
,
Fatigue life
,
Reliability
,
Failure
,
Optimization
,
Fatigue failure
,
Stochastic processes
A Unified Finite Element Approach for the Study of Postyielding Deformation Behavior of Formable Sheet Materials
J. Pressure Vessel Technol. November 2007, 129(4): 689–697.
doi: https://doi.org/10.1115/1.2767360
Topics:
Deformation
,
Fracture (Materials)
,
Fracture (Process)
,
Steel
,
Stress
,
Tension
,
Finite element analysis
,
Aluminum alloys
,
Shear (Mechanics)
,
Sheet materials
Damping Effect on Mechanical Waves in an Elastic Solid Expanded Tubular
J. Pressure Vessel Technol. November 2007, 129(4): 698–712.
doi: https://doi.org/10.1115/1.2767363
Topics:
Damping
,
Fluids
,
Wave propagation
,
Displacement
,
Waves
,
Stress
Ultrasonic Creep Damage Detection by Frequency Analysis for Boiler Piping
J. Pressure Vessel Technol. November 2007, 129(4): 713–718.
doi: https://doi.org/10.1115/1.2767364
A Nondestructive Strategy for the Distinction of Natural Fatigue and Stress Corrosion Cracks Based on Signals From Eddy Current Testing
J. Pressure Vessel Technol. November 2007, 129(4): 719–728.
doi: https://doi.org/10.1115/1.2767365
Anodic Behavior of Specimens Prepared From a Full-Diameter Alloy 22 Fabricated Mockup Container for Nuclear Waste
J. Pressure Vessel Technol. November 2007, 129(4): 729–736.
doi: https://doi.org/10.1115/1.2767366
Topics:
Alloys
,
Containers
,
Corrosion
,
Polarization (Electricity)
,
Polarization (Light)
,
Polarization (Waves)
,
Testing
Phased Array Ultrasonic Measurement of Fatigue Crack Growth Profiles in Stainless Steel Pipes
L. Satyarnarayan, D. M. Pukazhendhi, Krishnan Balasubramaniam, C. V. Krishnamurthy, D. S. Ramachandra Murthy
J. Pressure Vessel Technol. November 2007, 129(4): 737–743.
doi: https://doi.org/10.1115/1.2767367
Topics:
Fatigue cracks
,
Fracture (Materials)
,
Pipes
,
Stainless steel
,
Simulation
,
Ray tracing
Urea Reactor Integrity Evaluation Based on Failure Analysis
J. Pressure Vessel Technol. November 2007, 129(4): 744–753.
doi: https://doi.org/10.1115/1.2767368
Technical Briefs
Modernization of Pressure Vessel Design Codes ASME Section VIII, Division 2, 2007 Edition
J. Pressure Vessel Technol. November 2007, 129(4): 754–758.
doi: https://doi.org/10.1115/1.2794737
Topics:
Design
,
Pressure vessels
,
Vessels
Acoustic Resonance in a Package Boiler and Its Solution—A Case Study
J. Pressure Vessel Technol. November 2007, 129(4): 759–762.
doi: https://doi.org/10.1115/1.2767369
Topics:
Acoustics
,
Boilers
,
Resonance
,
Flow (Dynamics)
,
Sound pressure
Burst Strength Analysis of Casing With Geometrical Imperfections
J. Pressure Vessel Technol. November 2007, 129(4): 763–770.
doi: https://doi.org/10.1115/1.2767370
Topics:
Finite element analysis
,
Hardening
,
Pressure
Vibration Fatigue of Centrifugal Fan Impeller Due to Structural-Acoustic Coupling and Its Prevention: A Case Study
J. Pressure Vessel Technol. November 2007, 129(4): 771–774.
doi: https://doi.org/10.1115/1.2767371
Topics:
Acoustics
,
Impellers
,
Vibration
,
Mode shapes
,
Strain gages
,
Fatigue
Technology Review
Comparative Study for Stresses in Nozzle and Flange Welds Generated During Conventional Pressure Testing and Local Pressure Testing Using Bolted Devices
J. Pressure Vessel Technol. November 2007, 129(4): 775–780.
doi: https://doi.org/10.1115/1.2767372
Topics:
Flanges
,
Pressure
,
Stress
,
Nozzles
,
Pipes
,
Pressure testing
,
Welded joints
Email alerts
RSS Feeds
On the possibility of extending the crack length criterion in the master curve methodology
J. Pressure Vessel Technol
Investigation of Fracture Prediction Capability of XFEM and FEM using SENT Specimens
J. Pressure Vessel Technol
The Behavior of Elbow Elements at Pure Bending Applications Compared to Beam and Shell Element Models
J. Pressure Vessel Technol (February 2025)