This paper presents evaluation of the energy consumption and tracking performance associated with the use of a recently introduced dual-mode model predictive controller (DMMPC) for control of a heating, ventilation, and air conditioning (HVAC) system. The study was conducted using detailed simulations of an HVAC system, which included a multizone air loop, a water loop, and a chiller. Energy consumption and tracking performance are computed from the simulations and evaluated in the presence of different types and magnitudes of noise and disturbances. Performance of the DMMPC is compared with a baseline proportional-integral-derivative (PID) control structure commonly used for HVAC system control, and this comparison showed clear and consistent superiority of the DMMPC.
Skip Nav Destination
Article navigation
August 2018
Research-Article
Energy Efficiency and Tracking Performance Evaluation for Dual-Mode Model Predictive Control of HVAC Systems
Zicheng Cai,
Zicheng Cai
Department of Mechanical Engineering,
The University of Texas at Austin,
Austin, TX 78705
e-mail: zichengcai@utexas.edu
The University of Texas at Austin,
Austin, TX 78705
e-mail: zichengcai@utexas.edu
Search for other works by this author on:
Asad A. Ul Haq,
Asad A. Ul Haq
Department of Mechanical Engineering,
The University of Texas at Austin,
Austin, TX 78705
e-mail: asadulhaq@utexas.edu
The University of Texas at Austin,
Austin, TX 78705
e-mail: asadulhaq@utexas.edu
Search for other works by this author on:
Michael E. Cholette,
Michael E. Cholette
Science and Engineering Faculty,
Queensland University of Technology,
Brisbane 4001, QLD, Australia
e-mail: michael.cholette@qut.edu.au
Queensland University of Technology,
Brisbane 4001, QLD, Australia
e-mail: michael.cholette@qut.edu.au
Search for other works by this author on:
Dragan Djurdjanovic
Dragan Djurdjanovic
Department of Mechanical Engineering,
The University of Texas at Austin,
Austin, TX 78705
e-mail: dragand@me.utexas.edu
The University of Texas at Austin,
Austin, TX 78705
e-mail: dragand@me.utexas.edu
Search for other works by this author on:
Zicheng Cai
Department of Mechanical Engineering,
The University of Texas at Austin,
Austin, TX 78705
e-mail: zichengcai@utexas.edu
The University of Texas at Austin,
Austin, TX 78705
e-mail: zichengcai@utexas.edu
Asad A. Ul Haq
Department of Mechanical Engineering,
The University of Texas at Austin,
Austin, TX 78705
e-mail: asadulhaq@utexas.edu
The University of Texas at Austin,
Austin, TX 78705
e-mail: asadulhaq@utexas.edu
Michael E. Cholette
Science and Engineering Faculty,
Queensland University of Technology,
Brisbane 4001, QLD, Australia
e-mail: michael.cholette@qut.edu.au
Queensland University of Technology,
Brisbane 4001, QLD, Australia
e-mail: michael.cholette@qut.edu.au
Dragan Djurdjanovic
Department of Mechanical Engineering,
The University of Texas at Austin,
Austin, TX 78705
e-mail: dragand@me.utexas.edu
The University of Texas at Austin,
Austin, TX 78705
e-mail: dragand@me.utexas.edu
1Corresponding author.
Contributed by the Heat Transfer Division of ASME for publication in the JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS. Manuscript received November 29, 2017; final manuscript received April 7, 2018; published online June 22, 2018. Assoc. Editor: Amir Jokar.
J. Thermal Sci. Eng. Appl. Aug 2018, 10(4): 041023 (10 pages)
Published Online: June 22, 2018
Article history
Received:
November 29, 2017
Revised:
April 7, 2018
Citation
Cai, Z., Ul Haq, A. A., Cholette, M. E., and Djurdjanovic, D. (June 22, 2018). "Energy Efficiency and Tracking Performance Evaluation for Dual-Mode Model Predictive Control of HVAC Systems." ASME. J. Thermal Sci. Eng. Appl. August 2018; 10(4): 041023. https://doi.org/10.1115/1.4040281
Download citation file:
Get Email Alerts
Cited By
Experimental and Finite Element Investigations to Study the Temperature Distribution at the Orthotic Boot–Skin Interface
J. Thermal Sci. Eng. Appl (July 2025)
Proposal and Evaluation of a Novel Solar Thermal-Driven Cooling-Power Cogeneration System
J. Thermal Sci. Eng. Appl (July 2025)
Aero-Thermal Calculations for a Rotor Blade With Different Dimple and Protrusion Arrangements
J. Thermal Sci. Eng. Appl (July 2025)
Related Articles
Performance Improvements in Cooker-Top Gas Burners for Small Aspect Ratio Changes
J. Thermal Sci. Eng. Appl (December,2017)
Model Predictive Control-Based Hierarchical Control of a Multi-Zone Commercial HVAC System
J. Eng. Sustain. Bldgs. Cities (May,2021)
The Sub-Metered HVAC Implemented for Demand Response Dataset
J. Dyn. Sys., Meas., Control (January,2024)
Improved Multi-Objective Coati Optimization Algorithm for Optimizing Energy Efficiency and Thermal Comfort in Chilled Water Systems
J. Thermal Sci. Eng. Appl (April,2025)
Related Proceedings Papers
Related Chapters
The Design of LQR and Fuzzy Logic Controller for a Thermal System with Large Time Delay
Proceedings of the 2010 International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2010)
Performance Evaluation of Digital Filters for Noise Cancellation in Electrocardiogram
International Conference on Software Technology and Engineering, 3rd (ICSTE 2011)
Dynamic Control Strategy of a Biped Inspired from Human Walking
Intelligent Engineering Systems through Artificial Neural Networks Volume 18