Buoyancy-induced flow occurs in the rotating cavities between the adjacent disks of a gas-turbine compressor rotor. In some cases, the cavity is sealed, creating a closed system; in others, there is an axial throughflow of cooling air at the center of the cavity, creating an open system. For the closed system, Rayleigh–Bénard (RB) flow can occur in which a series of counter-rotating vortices, with cyclonic and anticyclonic circulation, form in the plane of the cavity. For the open system, the RB flow can occur in the outer part of the cavity, and the core of the fluid containing the vortices rotates at a slower speed than the disks: that is, the rotating core “slips” relative to the disks. These flows are examples of self-organizing systems, which are found in the world of far-from-equilibrium thermodynamics and which are associated with the maximum entropy production (MEP) principle. In this paper, these thermodynamic concepts are used to explain the phenomena that were observed in rotating cavities, and expressions for the entropy production were derived for both open and closed systems. For the closed system, MEP corresponds to the maximization of the heat transfer to the cavity; for the open system, it corresponds to the maximization of the sum of the rates of heat and work transfer. Some suggestions, as yet untested, are made to show how the MEP principle could be used to simplify the computation of buoyancy-induced flows.
Skip Nav Destination
Article navigation
July 2010
Research Papers
Thermodynamic Analysis of Buoyancy-Induced Flow in Rotating Cavities
J. Michael Owen
J. Michael Owen
Search for other works by this author on:
J. Michael Owen
J. Turbomach. Jul 2010, 132(3): 031006 (7 pages)
Published Online: March 24, 2010
Article history
Received:
January 25, 2008
Revised:
January 30, 2008
Online:
March 24, 2010
Published:
March 24, 2010
Citation
Owen, J. M. (March 24, 2010). "Thermodynamic Analysis of Buoyancy-Induced Flow in Rotating Cavities." ASME. J. Turbomach. July 2010; 132(3): 031006. https://doi.org/10.1115/1.2988170
Download citation file:
Get Email Alerts
Evaluating Thin-Film Thermocouple Performance on Additively Manufactured Turbine Airfoils
J. Turbomach (July 2025)
Thermohydraulic Performance and Flow Structures of Diamond Pyramid Arrays
J. Turbomach (July 2025)
Related Articles
Modeling the Air-Cooled Gas Turbine: Part 1—General Thermodynamics
J. Turbomach (April,2002)
Performance of Pre-Swirl Rotating-Disc Systems
J. Eng. Gas Turbines Power (July,2000)
CFD Optimization of Cooling Air Offtake Passages Within Rotor Cavities
J. Turbomach (April,2003)
Buoyancy-Induced Flow in a Heated Rotating Cavity
J. Eng. Gas Turbines Power (January,2006)
Related Chapters
Control and Operational Performance
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Thermodynamic Performance
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Fluid Mechanics
Centrifugal Compressors: A Strategy for Aerodynamic Design and Analysis