Increasing compressor pressure ratios (thereby gaining a benefit in cycle efficiency), or reducing the number of stages (to reduce weight, cost, etc.), will require an increase in pressure rise per stage. One method of increasing the pressure rise per stage is by increasing the stage loading coefficient, and it is this topic, which forms the focus of the present paper. In the past, a great deal of effort has been expended in trying to design highly loaded blade rows. Most of this work has focused on optimizing a particular design, rather than looking at the fundamental problems associated with high loading. This paper looks at the flow physics behind the problem, makes proposals for a new design strategy, and explains sources of additional loss specific to highly loaded designs. Detailed experimental measurements of three highly loaded stages (Δh0/U20.65) have been used to validate a computational fluid dynamics (CFD) code. The calibrated CFD has then been used to show that, as the stage loading is increased, the flow in the stator passages breaks down first. This happens via a large corner separation, which significantly impairs the stage efficiency. The stator can be relieved by increasing stage reaction, thus shifting the burden to the rotor. Fortunately, the CFD calculations show that the rotor is generally more tolerant of high loading than the stator. Thus, when stage loading is increased, it is necessary to increase the reaction to achieve the optimum efficiency. However, the design exercise using the calibrated CFD also shows that the stage efficiency is inevitably reduced as the stage loading is increased (in agreement with the experimental results). In the second part of the paper, the role that the profile loss plays in the reduction in efficiency at high stage loading is considered. A simple generic velocity distribution is developed from first principles to demonstrate the hitherto neglected importance of the pressure surface losses in highly loaded compressors.

1.
Lieblein
,
S.
, 1965,
Experimental Flow in Two-Dimensional Cascades
, Reprinted NASA SP-36: Aerodynamic Design of Axial Compressors, pp.
183
226
.
2.
Wennerstrom
,
A. J.
, 1987, “
Highly Loaded Axial Flow Compressors: History and Current Developments
,”
ASME J. Turbomach.
0889-504X,
109
, pp.
388
397
.
3.
Lyes
,
P. A.
, and
Ginder
,
R. B.
, 1998, “
Experimental Evaluation of the High-to-Low Speed Transformation Process for a Highly Loaded Core Compressor Stage
,”
Proceedings of the International Gas Turbine and Aero-Engine Congress and Exhibition
, Paper No. 98-GT-334.
4.
McNulty
,
G. S.
,
Deckers
,
J. J.
,
Beacher
,
B. F.
, and
Khalid
,
S. A.
, 2004, “
The Impact of Forward Swept Rotors on Tip-Limited Low-Speed Axial Compressors
,”
ASME J. Turbomach.
0889-504X,
126
, pp.
445
454
.
5.
Horlock
,
J. H.
, 1973,
Axial Flow Compressors
,
Robert E. Kreiger Publishing Company
,
FL
.
6.
Denton
,
J. D.
, 1992, “
The Calculation of Three-Dimensional Viscous Flow Through Multi-Stage Turbomachines
,”
ASME J. Turbomach.
0889-504X,
114
, pp.
18
26
.
7.
Dickens
,
A. M. J.
, 2008, “
Highly Loaded Compressors
,” Ph.D. thesis, University of Cambridge, UK.
8.
Drela
,
M.
, 1986, “
Two-Dimensional Transonic Aerodynamic Design and Analysis Using the Euler Equations
,” GTL Report No. 187, Massachusetts Institute of Technology, MS.
9.
Wright
,
P. I.
, and
Miller
,
D. C.
, 1991, “
An Improved Compressor Performance Prediction Model
,”
Proceedings of the European Conference of Turbomachinery: Latest Developments in a Changing Scene
, Paper No. C423/028.
10.
Koch
,
C. C.
, and
Smith
,
L. H.
, 1976, “
Loss Sources and Magnitudes in Axial Flow Compressors
,”
ASME J. Eng. Power
0022-0825
98
, pp.
411
424
.
11.
Denton
,
J. D.
, 1993, “
Loss Mechanisms in Turbomachines
,”
ASME J. Turbomach.
0889-504X,
115
, pp.
621
656
.
12.
Storer
,
J. A.
, and
Cumpsty
,
N. A.
, 1993, “
An Approximate Analysis and Prediction Method for Tip Clearance Loss in Axial Compressors
,” ASME Paper No. 93-GT-140.
You do not currently have access to this content.